Laterality, alternation, and perseveration relationships on the T-maze test.

The T-maze test has been used to study several entirely different issues: spontaneous alternation behavior (SAB), perseveration behavior (PB), and behavioral lateralization. Despite the fact that in this test the behavior studied is always the same one (i.e., side choice), the possible relationships among SAB, PB, and lateralization have not been previously evaluated. The present study investigated the relationships among these functions. The results demonstrated that (1) shock increases PB and lateralization decreases SAB, (2) practice increases lateralization and decreases SAB but does not modify PB, and (3) there are sex differences for alternation and SAB. Because these functions are expressed by the same behavioral pattern, they must be quantified simultaneously to avoid mistaken conclusions when the T-maze test is used. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Assessment of Bonelike® graft with a resorbable matrix using an animal model

Synthetic bone grafts have been developed to provide an alternative to autografts and allografts. Bonelike® is a patented synthetic osteoconductive bone graft that mimics the mineral composition of natural bone. In the present preliminary animal studies a user-friendly version of synthetic bone graft Bonelike® have been developed by using a resorbable matrix, Floseal®, as a vehicle and raloxifene hydrochloride as a therapeutic molecule, that is known to decrease osteoclast activity and therefore enhanced bone formation. From histological and scanning electron microscopy evaluations, the use of Bonelike® associated with Floseal® and raloxifene hydrochloride showed that new bone was rapidly apposed on implanted granules and also that the presence of the matrix and therapeutic molecule does not alter the proven highly osteoconductivity properties of Bonelike®. Therefore, this association may be one step-forward for the clinical applications of Bonelike® scaffolds since it is much more easy-to-handle when compared to granular materials.     

Recovering gallium from residual bayer process liquor

Gallium is normally obtained by direct electrolysis as a by-product from Bayer process residual liquor at an aluminum processing plant. However, to permit any net accumulation of the metal, the gallium concentration must be at least about 0.3 g/l in the liquor. This article describes a continuous process of extraction with organic solvents and rhodamine-B, followed by a re-extraction step into aqueous media. The final product is a solid containing up to 18 wt.% Ga in a solid mixture of hydroxides and oxides of gallium and aluminum. This final product can then be electrolyzed to recover the gallium more efficiently.     

Boundary Detection in Particle‐based Fluids

This paper presents a novel method to detect free‐surfaces on particle‐based volume representation. In contrast to most particle‐based free‐surface detection methods, which perform the surface identification based on physical and geometrical properties derived from the underlying fluid flow simulation, the proposed approach only demands the spatial location of the particles to properly recognize surface particles, avoiding even the use of kernels. Boundary particles are identified through a Hidden Point Removal (HPR) operator used for visibility test. Our method is very simple, fast, easy to implement and robust to changes in the distribution of particles, even when facing large deformation of the free‐surface. A set of comparisons against state‐of‐the‐art boundary detection methods show the effectiveness of our approach. The good performance of our method is also attested in the context of fluid flow simulation involving free‐surface, mainly when using level‐sets for rendering purposes.     

Hybrid assessment method for software engineering decisions

During software development, many decisions need to be made to guarantee the satisfaction of the stakeholders' requirements and goals. The full satisfaction of all of these requirements and goals may not be possible, requiring decisions over conflicting human interests as well as technological alternatives, with an impact on the quality and cost of the final solution. This work aims at assessing the suitability of multi-criteria decision making (MCDM) methods to support software engineers' decisions. To fulfil this aim, a HAM (Hybrid Assessment Method) is proposed, which gives its user the ability to perceive the influence different decisions may have on the final result. HAM is a simple and efficient method that combines one single pairwise comparison decision matrix (to determine the weights of criteria) with one classical weighted decision matrix (to prioritize the alternatives). To avoid consistency problems regarding the scale and the prioritization method, HAM uses a geometric scale for assessing the criteria and the geometric mean for determining the alternative ratings.     

Structural studies of pulsed-laser deposited nanocomposite metal-oxide films

Pulsed laser deposition in vacuum has been used to develop metal-oxide nanocomposite films with well controlled structural quality. Results for the copper–aluminium oxide (Cu:Al₂O₃) system are used to illustrate the main morphological and structural features of these films. High resolution transmission electron microscopy (TEM) analysis shows that the films consist of Cu nanocrystals with average dimensions that can be controlled between 2 nm and 10 nm embedded in an amorphous Al₂O₃ matrix. It is observed that the in-plane shape of the nanocrystals evolves from circular to elongated, and the number of nanocrystals per unit area decreases as their size increases. This evolution is explained in terms of nucleation at the substrate surface and coalescence during the later stages of growth. The thermal stability of the films has been studied by in situ TEM annealing and no transformation could be observed up to about 800 °C when partial crystallization of the Al₂O₃ starts.     

Experimental analyses of the poly(vinyl chloride) foams' mechanical anisotropic behavior

Assessing a full set of mechanical properties is a rather complicate task in the case of foams, especially if material models must be calibrated with these results. Many issues, for example anisotropy and heterogeneity, influence the mechanical behavior. This article shows through experimental analyses how the microstructure affects different experimental setups and it also quantifies the degree of anisotropy of a poly(vinyl chloride) foam. Monotonic and cyclic experimental tests were carried out using standard compression specimens and non‐standard tensile specimens. Results are complemented and compared with the aid of a digital image correlation technique and scanning electron microscopy analyses. Mechanical properties (e.g., elastic and plastic Poisson's ratios) are evaluated for compression and tensile tests, for two different material directions (normal and in‐plane). The material is found to be transversely isotropic. Differences in the results of the mechanical properties can be as high as 100%, or even more depending on the technique used and the loading direction. Also, the experimental analyses show how the material's microstructure behavior, like the evolution of the herein identified “yield fronts” and a “spring back” phenomenon, can influence the phenomenological response and the failure mechanisms as well as the hardening curves. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers     

A new sheep model with automatized analysis of biomaterial-induced bone tissue regeneration

Presently, several bone graft substitutes are being developed or already available for clinical use. However, the limited number of clinical and in vivo trials for direct comparison between these products may complicate this choice. One of the main reasons for this scarcity it is the use of models that do not readily allow the direct comparison of multiple bone graft substitutes, due especially to the small number of implantation sites. Although sheep cancellous bone models are now well established for these purposes, the limited availability of cancellous bone makes it difficult to find multiple comparable sites within a same animal. These limitations can be overcome by the monocortical model here proposed as it consists in 5–6 holes (5 mm Ø), in the femoral diaphysis, with similar bone structure, overlying soft tissue and loading pattern for all defects. Associated to this model, it is also described a fast histomorphometric analysis method using a computer image segmentation test (Threshold method) to assess bone regeneration parameters. The information compiled through the experimental use of 45 sheep in several studies allowed determining that this ovine model has the potential to demonstrate differences in bone-forming performance between various scaffolds. Additionally, the described histomorphometric method is fast, accurate and reproducible.     

Application of titanium machining chips in welding consumables for wear-resistant hardfacing

Equipment of sugar cane plants and mineral extraction are submitted to severe abrasive wear conditions. Welded hardfacings are usually applied to repair this kind of damage, where commercial chromium/carbon-rich welding consumables have usually been employed. In the present work we investigated the microstructure of experimental hardfacings made by addition of residues (chips) collected from the machining of ASTM F67 (unalloyed Ti, grade 4) alloy. Mixtures with different carbide-formers (Cr/Nb ferro-alloys) were also tested. Two layers of ‘pure’ chips (Ti), chips plus Fe–Cr (Ti–Cr), and chips plus Fe–Nb (Ti–Nb) were applied on low-carbon steel specimens by the GTAW/TIG process. The microstructure of hardfacing layers was observed by optical and scanning electron microscopy (SEM) equipped with EDS microanalysis. The microstructural characterization has determined that carbide distributions change significantly with the chemical nature of the hardfacing. SEM observations coupled with EDS microanalysis have confirmed the formation of complex carbides within the metal weld, whose stoichiometry was determined by X-ray diffraction (XRD) analysis. Mixed carbides of MC type and some cementite have been found. As a result it was suggested that use of ASTM F67 chips as carbide formers for composition of welding consumables can contribute to improved wear resistance of hardfacings, if compared with traditional chromium-based hardfacings.     

From Molecules to Behavior in Long-Term Inorganic Mercury Intoxication: Unraveling Proteomic Features in Cerebellar Neurodegeneration of Rats

Mercury is a severe environmental pollutant with neurotoxic effects, especially when exposed for long periods. Although there are several evidences regarding mercury toxicity, little is known about inorganic mercury (IHg) species and cerebellum, one of the main targets of mercury associated with the neurological symptomatology of mercurial poisoning. Besides that, the global proteomic profile assessment is a valuable tool to screen possible biomarkers and elucidate molecular targets of mercury neurotoxicity; however, the literature is still scarce. Thus, this study aimed to investigate the effects of long-term exposure to IHg in adult rats’ cerebellum and explore the modulation of the cerebellar proteome associated with biochemical and functional outcomes, providing evidence, in a translational perspective, of new mercury toxicity targets and possible biomarkers. Fifty-four adult rats were exposed to 0.375 mg/kg of HgCl₂ or distilled water for 45 days using intragastric gavage. Then, the motor functions were evaluated by rotarod and inclined plane. The cerebellum was collected to quantify mercury levels, to assess the antioxidant activity against peroxyl radicals (ACAPs), the lipid peroxidation (LPO), the proteomic profile, the cell death nature by cytotoxicity and apoptosis, and the Purkinje cells density. The IHg exposure increased mercury levels in the cerebellum, reducing ACAP and increasing LPO. The proteomic approach revealed a total 419 proteins with different statuses of regulation, associated with different biological processes, such as synaptic signaling, energy metabolism and nervous system development, e.g., all these molecular changes are associated with increased cytotoxicity and apoptosis, with a neurodegenerative pattern on Purkinje cells layer and poor motor coordination and balance. In conclusion, all these findings feature a neurodegenerative process triggered by IHg in the cerebellum that culminated into motor functions deficits, which are associated with several molecular features and may be related to the clinical outcomes of people exposed to the toxicant.