Output feedback controller for polytopic systems exploiting the direct searching of the design space

This paper deals with the problem of designing a robust static output feedback controller for polytopic systems. The current research that tackled this problem is mainly based on LMI method, which is conservative by nature. In this paper, a novel approach is proposed, which considers the design space of the controller parameters and iteratively partitions the space to small simplexes. Then, by assessing the stability in each simplex, the solution space for design parameters is directly determined. It has been theoretically proved that, if there exists a feasible solution in the design space, the algorithm can find it. To validate the result of the proposed approach, comparative simulation examples are given to illustrate the performance of the design methodology as compared to those of previous approaches.     

Simulation of Natural Depletion and Miscible Gas Injection Effects on Asphaltene Stability in Petroleum Reservoir Fluids

Natural depletion of petroleum reservoirs as well as gas injection for enhance oil recovery, are unavoidable processes in the oil industry. Foremost, prediction of the problems due to these two processes is very necessary and important. So many field and experimental experiences have shown that heavy organic depositions, especially asphaltene deposition, are principal results during these processes. Results of laboratory simulation of asphaltene deposition during the natural depletion of petroleum reservoirs and also during gas injection and enhanced oil recovery (EOR) processes are reported here. This is achieved through the design of a new experimental setup for the investigation of pressure and composition effects on asphaltene deposition in petroleum fluids at high pressure and high temperature conditions. In this work, asphaltene deposition during decreasing pressure, from pressures greater than reservoir pressure to pressures below the bubble point pressure (natural depletion) and also asphaltene deposition during natural gas injection in reservoir conditions, are studied for three samples—one recombined sample and two bottomhole samples. All of the obtained results from this work conform to theoretical and other experimental works.     

Reserve estimation of an open pit mine under price uncertainty by real option approach

Reserve estimation is a key to find the correct NPV in a mining project. The most important factor in reserve estimation is the metal price. Metal price fluctuations in recent years were exaggerated, and imposed a high degree of uncertainty to the re-serve estimation, and in consequence to the whole mine planning procedure. Real option approach is an efficient method of deci-sion making in the uncertain conditions. This approach has been used for evaluation of defined natural resources projects until now. This study considering the metal price uncertainty used real option approach to prepare a methodology for reserve estimation in open pit mines. This study was done on a copper cylindrical deposit, but the achieved methodology can be adjusted for all kinds of deposits. This methodology was comprehensively described through the examples in such a manner that can be used by the mine planners.     

Dehydration of water/1-1-dimethylhydrazine mixtures by zeolite membranes

In this research, dehydration of water/1-1-dimethylhydrazine (UDMH) mixtures by zeolite NaA and hydroxy sodalite membranes has been investigated. Support of these membranes has been tubular mullites that have been made by extruding a mixture of about 67–75% kaolin clay and 33–25% distilled water using an extruder. Zeolite NaA and hydroxy sodalite membranes have been coated on the external surface of the porous supports by the hydrothermal synthesis.

UDMH/water mixtures have been separated at ambient temperature and pressure by pervaporation (PV) using these zeolite membranes. These membranes showed very high selectivity of water for all UDMH mixtures. For the UDMH/water mixtures, separation factor as high as 10 000 has been obtained for UDMH feed concentration of 2%. Total mass fluxes of 1.05–0.2 kg/(m² h) have been also obtained.     

MC-MLAS: Multi-channel Minimum Latency Aggregation Scheduling in Wireless Sensor Networks

Data aggregation is a key, yet time-consuming functionality in wireless sensor networks (WSNs). Multi-channel design is a promising technique to alleviate interference as a primary reason for long latency of TDMA aggregation scheduling. Indeed, it provides more potential of parallel transmissions over different frequency channels, thus minimizing time latency. In this paper, we focus on designing a multi-channel minimum latency aggregation scheduling protocol, named MC-MLAS, using a new joint approach for tree construction, channel assignment, and transmission scheduling. To our best knowledge, this is the first work in the literature which combines orthogonal channels and partially overlapping channels to consider the total latency involved in data aggregation. Extensive simulations verify the superiority of MC-MLAS in WSNs.     

A mechanistic approach to evaluate the potential of the debonding distress in asphalt pavements

The debonding distress in asphalt pavement structures is a critical problem that affects the performance of asphalt concrete pavements. It occurs at the layer interface due to the poor bond quality between adjacent asphalt concrete layers and/or when stresses at the layer interface exceed the strengths of the material at the interface. The debonding of the adjacent layers, especially the top surface layer of an asphalt pavement, is a contributing factor to the premature cracking of pavements. Hence, the debonding distress can lead to a reduction in the life of the pavement. This paper presents an analytical and experimental framework to evaluate the potential for debonding at the layer interface of asphalt concrete pavements. Computational analysis was performed to determine the critical stress and strain states in layered asphalt pavements under moving vehicle loads using the Layered ViscoElastic pavement analysis for Critical Distresses (LVECD) computer program developed at North Carolina State University. This computational analysis enables a greater understanding of the critical stress that is involved in debonding and the ways that such stress is affected by pavement design parameters and environmental conditions. In addition, a prediction model was developed that can determine the shear bond strength at the interface of asphalt concrete layers with different tack coat materials at various temperatures, loading rates and normal confining stresses. The systematic and mechanistic framework developed in this study employs the maximum shear ratio concept as a shear failure criterion and provides a tool to evaluate the effects of various loading, environmental and pavement factors on the debonding potential of asphalt pavements. The overall advantages of the mechanistic framework and approach using the LVECD analysis tool will help lead to better understanding of the debonding mechanism, proper selection of the tack coats, and economic benefit in highway pavement maintenance and rehabilitation costs.     

Numerical investigation of the configuration of the pools on the flow pattern passing over pooled stepped spillway in skimming flow regime

Spillways are hydraulic structures which transfer water to the downstream. Stepped spillways areseriously attended to, since they are highly efficient regarding energy dissipation. In this study, the flow pattern over stepped spillways was simulated with five different pool configurations. The VOF method was used to simulate the flow free surface, and K??(RNG) was employed to model turbulence. The results obtained fromthe numerical model were fairly consistent with the experimental results. The results demonstrated that theflow velocity and the residual head showed significant differences in the spillway width with regard to different pool configurations. The pool configuration in which the pools were installed as staggered configuration of flat and pooled steps showed the least residual head at the downstream and as a result the greatest energy dissipation.     

Engineering carbon quantum dots for photomediated theranostics

Carbon quantum dots (CQDs) have emerged as potential alternatives to classical metal-based semiconductor quantum dots (QDs) due to the abundance of their precursors, their ease of synthesis, high biocompatibility, low cost, and particularly their strong photoresponsiveness, tunability, and stability. Light is a versatile, tunable stimulus that can provide spatiotemporal control. Its interaction with CQDs elicits interesting responses such as wavelength-dependent optical emissions, charge/electron transfer, and heat generation, processes that are suitable for a range of photomediated bioapplications. The carbogenic core and surface characteristics of CQDs can be tuned through versatile engineering strategies to endow specific optical and physicochemical properties, while conjugation with specific moieties can enable the design of targeted probes. Fundamental approaches to tune the responses of CQDs to photo-interactions and the design of bionanoprobes are presented, which enable biomedical applications involving diagnostics and therapeutics. These strategies represent comprehensive platforms for engineering multifunctional probes for nanomedicine, and the design of QD probes with a range of metal-free and emerging 2D materials.

Open image in new window

     

Analysis and suppression of spurious modes of the ring shape anchored RF MEMS contour mode disk resonator

One of the most encumbering issues in RF MEMS resonators is spurious modes. The problem of spurious modes becomes more critical, when the ring type resonators are used. In the ring shape anchored contour mode disk resonator, for achieving a low serial resistance, the inner radius of the disk must be increased. This causes the spurious modes to become too close to the desired mode and degrade the operation of the resonator. In this work, spurious modes of before-mentioned device are introduced and their characteristics are evaluated by exact analytical approach. Based on those analytical approaches, we introduce two techniques for spurious mode suppression. The first technique is based on exciting the desired mode by proper electrode engineering and hence is an electrical approach. The second technique is reconfiguring of the anchor from a continuous ring to crossed ring segments and locating the segments on the phase discriminating lines to increase the insertion loss for spurious modes and decrease the losses for the fundamental mode. The final harmonic analysis verifies that the proposed techniques result a resonator with a pure frequency spectrum and spurious modes excluded over a very wide frequency range.