Effect of the geometry and pattern of the flow channel on the performance of polymer electrolyte membrane fuel cell

This research focuses on the effect of the geometry and patterns of the gas flow channel on the PEM fuel cell performance. Simulation was conducted and the results were verified by experiments. Three-dimensional, single phase, compressible and isothermal models of 5 cm² electrodes, anode and cathode, were developed and studied by utilizing a commercial Computational Fluid Dynamics (CFD) software, FLUENT 4.5. Two types of gas flow channel were investigated: conventional and interdigitated. The results showed that the flow channel pattern does not have a significant effect on the anode cell performance, whereas it has a strong effect/influence on the cathode cell performance. The interdigitated design provides a higher limiting current density and cell performance than the conventional design on the cathode side. Moreover, the cell performance does not depend on the inlet and outlet channel widths. On the contrary, for the interdigitated design, it was influenced by the shoulder width. Finally, experiments were conducted to validate the simulation results.     

Experimental assessment of fuel cell/supercapacitor hybrid system for scooters

This paper presents an experimental assessment of fuel cell hybrid propulsion systems for scooters based on a modular 1.2 kW PEM fuel cell. The tests of the hybrid system are carried out using a programmable electronic load. Different configurations of the fuel cell/battery and the fuel cell/supercapacitor hybrid systems are explored. Both systems demonstrate their ability to deliver the requested load satisfactorily. The distributions of the fuel cell power delivery, although different between the two systems, are within the region where the fuel cell efficiency is approximately constant. As a result, the rates of fuel consumption show no discernable difference between the two systems for all three driving cycles considered. In addition to the fuel consumption, considerations including bus voltage, cost and packaging issues suggest that the supercapacitor has advantages over the battery for the use as secondary energy storage in fuel cell hybrid propulsion system for scooters.     

On investigation of vibro-acoustics of FDB spindle motors for hard disk drives

The present work investigates vibro-acoustic behaviors of the fluid dynamic bearing (FDB) spindle motors for hard disk drives (HDD) through the sound spectra and the frequency response functions (FRF) of the motor structure. The quantitative evidence on the significance of the acoustic noise originated from the electromagnetic source is deduced from the sound spectra that were measured in two distinct cases of the spinning motor: in the normal operation and at the moment immediately after the power supply was disconnected. It is found that the effect of electromagnetic noise source is more dominant than the combined effect of the mechanical and aerodynamic sources. In addition, it is identified that, within the audible range of frequency, the frequency range of 13.4–20 kHz deems important to the noise problem as it is the main contributor to the acoustic noise for the FDB spindle motors. Moreover, the structural resonances that can be identified via the FRF are found to play an important role in the noise emitted by the motors. The concurrence of resonance and excitation frequencies clearly intensifies the sound spectrum, resulting in high discrete peaks, hence higher decibel level.     

Design and performance of a moderate temperature difference Stirling engine

The present work developed a prototype Stirling engine working at the moderate temperature range. This study attempts to demonstrate the potential of the moderate temperature Stirling engine as an option for the prime movers for Concentrating Solar Power (CSP) technology. The heat source temperature is set to 350–500 °C to resemble the temperature available from the parabolic trough solar collector. This moderate temperature difference allows the use of low cost materials and simplified mechanical designs. With the consideration of local technological know how and manufacturing infrastructure, this development works with a low charged pressure of 7 bar and uses air as a working fluid. The Beta-type Stirling engine is designed and manufactured for the swept volume of 165 cc and the power output of 100 W. The performance of engine is evaluated at different values of charge pressures and wall temperatures at the heater section. At 500 °C and 7 bar, the engine produces the maximum power of 95.4 W at 360 rpm. The thermal efficiency is 9.35% at this maximum power condition. Results show that the moderate temperature operation offers a clear advantage in terms of the specific power over the low temperature operation. In terms of the West number, the present work demonstrated that the moderate temperature difference operations could offer the performance on par with the high temperature operations with more simple and less costly development.     

Investigation of the influence of the Reynolds number on extinction and reignition

In this study comparisons are made of the results of a series of simulations for different values of the Reynolds number, but with fixed Schmidt and Prandtl numbers (Sc=Pr=0.7) and identical chemistry and approximately identical large-scale dynamics and initial scalar geometry. The goal is the investigation of the influence of the change in the diffusive scales on local extinction and reignition in a diffusion flame. Extinction occurs when the fluctuations of the scalar dissipation rate at the stoichiometric value of the mixture fraction (χ_st) become larger than a threshold value (χ_q). The fluctuations of the scalar dissipation rate reach higher values with increasing Reynolds number, but the probability that χ_st>χ_q does not increase with Reynolds number at the two highest values of the Reynolds number studied. The latter effect is related to the lognormal nature of the PDF of the scalar dissipation rate. As the fluctuations of χ_st become increasingly larger than χ_q, extinction takes place faster and results in lower temperatures. Reignition, however, appears to take place approximately similarly in the different cases. The Reynolds number dependence of the average temperature of the stoichiometric surface is mostly due to the increase in extinguished area fraction of the stoichiometric surface. Although the amount of extinction increases as the Reynolds number is increased, the rate of increase appears to slow down with increasing Reynolds number.