The direct/indirect composite resin veneers: a case report

Veneer restorations are well suited for conservative and aesthetic improvement of the anterior dentition. Laboratory fabricated porcelain and composite resin veneers present optimal aesthetics and durability. Although there are disadvantages associated with direct bonding, it provides control of color and contour for the operator, particularly in the case of a single anterior central incisor. Direct/indirect composite resin veneers utilize the advantages of both direct and indirect techniques in reconstruction of restorations with improved physical properties. The learning objective of this article is to review the available composite resins, opaquers, and tints, and present a step-by-step protocol for predictable restoration of discolored anterior dentition with direct/indirect heat-treated composite resin veneers in a single appointment. Patient evaluation, preoperative aesthetic considerations, selection of the restorative composite resins, and the clinical procedure are discussed.     

Studies on the synthesis of SAPO-5

Silicoaluminophosphate (SAPO-5) molecular sieves have been synthesised from reaction mixtures having a molar composition of: 0.7–1.0 Al₂O₃:0.7–1.0 P₂O₅:0.01–2.0 SiO₂:xR:40 H₂O (where R = (C₂H₃)₃N or (C₂H₃)₄NOH and x = 1.5–2.5 for (C₂H₅)⁵N and 0.5 for (C₂H₅)₄NOH, at 473 K using various sources of alumina and silica. The effects of (i) varying the crystallinity of the alumina source (boehmite) and (ii) the use of different silica sources such as freshly prepared silica either from sodium silicate or paddy husk extract, silica gel from commercial water-glass, and tetraethyl orthosilicate have been studied. The crystallinity of boehmite has been found to have a strong effect on its reactivity towards the formation of SAPO-5. The activity of boehmite for SAPO-5 formation increased with a decrease in its crystallinity (or with increase in its moisture content). Any silica source devoid of sodium ions could be employed for the synthesis of SAPO-5. The process of crystallisation started as early as within 1.5 h of reaction and incorporation of silicon into the AlPO₄ framework has been noted at this stage. Formation of some tridymite phase as impurity has been observed under conditions such as (i) SiO₂ concentration > 1.7 mole and (ii) x > 2.0 when R = (C²H₅)₃N.     

Influence of Nano Silica on Mechanical and Durability Characteristic of Mortar made by Partial Replacement of Natural Fine Aggregate with Recycled Fine Aggregate

Silicon - To implement sustainability concepts in the construction industry, the possibility of utilizing the recycled fine aggregate obtained from the crushing of coarse aggregate debris of...     

Using GOMS and NASA-TLX to Evaluate Human–Computer Interaction Process in Interactive Segmentation

HCI plays an important role in interactive medical image segmentation. The Goals, Operators, Methods, and Selection rules (GOMS) model and the National Aeronautics and Space Administration Task Load Index (NASA-TLX) questionnaire are different methods that are often used to evaluate the HCI process. In this article, we aim at improving the HCI process of interactive segmentation using both the GOMS model and the NASA-TLX questionnaire to: 1) identify the relations between these two methods and 2) propose HCI design suggestions based on the synthesis of the evaluation results using both methods. For this, we conducted an experiment where three physicians used two interactive segmentation approaches to segment different types of organs at risk for radiotherapy planning. Using the GOMS model, we identified 16 operators and 10 methods. Further analysis discovered strong relations between the use of GOMS operators and the results of the NASA-TLX questionnaire. Finally, HCI design issues were identified, and suggestions were proposed based on the evaluation results and the identified relations.     

Robust kernelized approach to clustering by incorporating new distance measure

A new data clustering algorithm Density oriented Kernelized version of Fuzzy c-means with new distance metric (DKFCM-new) is proposed. It creates noiseless clusters by identifying and assigning noise points into separate cluster. In an earlier work, Density Based Fuzzy C-Means (DOFCM) algorithm with Euclidean distance metric was proposed which only considered the distance between cluster centroid and data points. In this paper, we tried to improve the performance of DOFCM by incorporating a new distance measure that has also considered the distance variation within a cluster to regularize the distance between a data point and the cluster centroid. This paper presents the kernel version of the method. Experiments are done using two-dimensional synthetic data-sets, standard data-sets referred from previous papers like DUNN data-set, Bensaid data-set and real life high dimensional data-sets like Wisconsin Breast cancer data, Iris data. Proposed method is compared with other kernel methods, various noise resistant methods like PCM, PFCM, CFCM, NC and credal partition based clustering methods like ECM, RECM, CECM. Results shown that proposed algorithm significantly outperforms its earlier version and other competitive algorithms.     

A review on the features and technologies for energy efficiency of smart grid

In today's world striving for efficiency in every sector, especially power generation and distribution, smart grids emerge as the solution for efficiently meeting the increasing demand. They adjust themselves to optimally deliver energy at the lowest cost and highest quality possible. The grid successfully makes use of renewable energy resources, electric vehicles, and smart pricing techniques in its attempt to achieve energy efficiency. It also promotes a greener environment by striving to reduce greenhouse gas emissions. Information communication technology (ICT) helps the grid in collecting consumption data from the consumers and in sharing tariff information. ICT also helps to gather information about the status of the grid with regard to aspects like power quality, faults etc. The purpose of this paper is to review recent literature with a view to comprehensively present the technologies employed in the smart grid for achieving energy efficiency and the challenges involved therein.     

Influence of Al doping in LaCoO3 on structural,electrical and magnetic properties

We report investigations on polycrystalline LaCo_1?x Al _x O₃ (x = 0–0.9) bulk samples. The solid state synthesized samples showed a coexistence of rhombohedral and monoclinic phases in the intermediate concentrations (0.2 ≤ x ≤ 0.5) and pure rhombohedral phase otherwise. The observed effect of Al doping on dc transport has been analysed on the basis of small polaron hopping mechanism. The magnetisation results presented give evidence of weak ferromagnetism and anomalous temperature dependence of coercivity which we associate to the canting of the localised high-spin Co(III) and anti-symmetric exchange interactions at low temperatures.     

Sterol glycosides and cerebrosides accumulate in Pichia pastoris, Rhynchosporium secalis and other fungi under normal conditions or under heat shock and ethanol stress

The occurrence of glycolipids such as sterol glycosides, acylated sterol glycosides, cerebrosides and glycosyldiacylglycerols was examined in the three yeast species Candida albicans, Pichia pastoris and Pichia anomala, as well as in the six fungal species Sordaria macrospora, Pyrenophora teres, Ustilago maydis, Acremonium chrysogenum, Penicillium olsonii and Rhynchosporium secalis. Cerebroside was found in all organisms tested, whereas acylated sterol glycosides and glycosyldiacylglycerols were not found in any organism. Sterol glycosides were detected in P. pastoris strain GS115, U. maydis, S. macrospora and R. secalis. This glycolipid occurred in both yeast and filamentous forms of U. maydis but in neither form of C. albicans. This suggests that sterol glycoside is not correlated with the separately grown dimorphic forms of these organisms. Cerebrosides and sterol glycosides from P. pastoris and R. secalis were purified and characterized by mass spectrometry and nuclear magnetic resonance spectroscopy. The cerebrosides are beta-glucosyl ceramides consisting of a saturated alpha-hydroxy or non-hydroxy fatty acid and a Delta4,8-diunsaturated, C9-methyl-branched sphingobase. Sterol glycoside from P. pastoris was identified as ergosterol-beta-D-glucopyranoside, whereas the sterol glucosides from R. secalis contain two derivatives of ergosterol. The biosynthesis of sterol glucoside in P. pastoris CBS7435 and GS115 depended on the culture conditions. The amount of sterol glucoside in cells grown in complete medium was much lower than in cells from minimal medium and a strong increase in the content of sterol glucoside was observed when cells were subjected to stress conditions such as heat shock or increased ethanol concentrations. From these data we suggest that, in addition to Saccharomyces cerevisiae, new yeast and fungal model organisms should be used to study the physiological functions of glycolipids in eukaryotic cells. This suggestion is based on the ubiquitous and frequent occurrence of cerebrosides and sterol glycosides, both of which are rarely detected in S. cerevisiae. We suggest P. pastoris and two plant pathogenic fungi to be selected for this approach.     

Chemopreventive Effect of Different Ratios of Fish Oil and Corn Oil in Experimental Colon Carcinogenesis

n-3 Polyunsaturated fatty acids (PUFA) have a chemopreventive effect while n-6 PUFA promote carcinogenesis. The effect of these essential fatty acids may be related to oxidative stress. Therefore, the study was designed to evaluate the effect of different ratios of fish oil (FO) and corn oil (CO) in the prevention of colon cancer. Male Wistar rats were divided into control, dimethylhydrazine dihydrochloride (DMH) treated, FO + CO (1:1) and FO + CO (2.5:1). All the groups, except the control received a weekly injection of DMH for 4 weeks. The animals were sacrificed either 48 h later (initiation phase) or kept for 16 weeks (post initiation phase). DMH treatment in the initiation phase animals showed mild to moderate inflammation, decreased ROS and TrxR activity, increased antioxidants, apoptosis and ACF multiplicity. The post initiation study showed severe inflammation with hyperplasia, increased ACF multiplicity and ROS levels, a decrease in antioxidants and apoptosis. The FO + CO (1:1) treated animals showed severe inflammation, a decrease in ROS, an increase in antioxidants and apoptosis in the initiation phase. FO + CO (1:1) in the post initiation phase and FO + CO (2.5:1) in the initiation showed mild inflammation, increased ROS, apoptosis and decreased antioxidants. There was a decrease in ACF multiplicity and ROS levels, increased antioxidants and apoptosis in the post initiation phase study. The present study suggests that FO has a dose- and time-dependent chemopreventive effect in colon cancer mediated through oxidative stress and apoptosis.