The use of natural (Pinus pinaster) resin in the production of printing ink and the printability effect

Alkyd resins are generally used in the production of printing inks. All industries look for alternative raw materials in the production of ink with the growing inclination toward using natural products. Resins forming the vehicle of the ink to be obtained from natural resources will provide benefits for the environment, nature, and living creatures. The aim of the study was to promote the use of natural resin in the ink system. Natural Pinus pinaster resin was added into vegetable and mineral oil-based solvents in pure form with alkyd resin in different amounts and ink varnishes of different combinations were prepared. Then, printing inks were produced from these varnishes in pure and hybrid form. Following the assessment of the rheological properties of the inks prepared, printing tests were conducted to assess the printing quality parameters. Ideal mixing ratios of the natural resins in the ink were determined for printability. The environmental importance and advantages of the use of natural resins were discussed. Recommendations were given in line with the results to encourage widespread use of natural resins in near future.     

Characterization of the Ion Beam Current Density of the RF Ion Source with Flat and Convex Extraction Systems

Silicon - The characterization of ion beam current density distribution and beam uniformity is crucial for improving broad-beam ion source technologies. The design of the broad ion beam extraction...     

An experimental evaluation of traumatic globe rupture

PURPOSE: The purpose of this investigation was to evaluate the surgeon's ability to assess various types of globe injury, to determine the force necessary to rupture the globe with these types of injuries, and to determine typical orbital retraction forces used in the clinical setting. MATERIALS AND METHODS: Forty-four enucleated globes from recently killed cows were divided into four equal groups-one uninjured control group, one group with a through-and-through scleral laceration, another group with a subtotal scleral laceration, and the last group with an 18-gauge needle perforation. Twenty-seven boarded or board eligible oral and maxillofacial surgeons were asked to assess one sample from each of the four groups. They were then asked to retract a simulated globe on a custom-fabricated jig to determine clinical retraction forces. Ten globes from each of the four groups were then subjected to forces until rupture on an Instron 8501M mechanical testing unit. Accuracy of the clinical assessment was determined, and means and standard deviations of the retraction forces and globe rupture forces were derived. RESULTS: Through-and-through lacerations were assessed by surgeons with 100% accuracy, subtotal lacerations with 96% accuracy, uninjured globes with 74% accuracy, and perforated globes with 15% accuracy. Globe rupture occurred at 16.72+/-7.87 kg in the control group, 20.36+/-7.87 kg in the perforated group, 15.38+/-6.06 kg in the subtotal laceration group, and 4.94+/-2.56 kg in the through-and-through laceration group. Statistically significant differences (P < .001) were noted between the total laceration group and all other groups. The mean retraction force was 0.35+/-0.47 kg, which was statistically less than the force used in all of the rupture groups (P < .001). CONCLUSIONS: Severe injuries (through-and-through lacerations) were assessed with 100% accuracy by the clinicians, and less severe injuries with less accuracy. Rupture forces for globes with perforations and subtotal lacerations were no different than for the control group, but substantially less than for the total laceration group. The simulated clinical retraction forces were substantially more than the rupture forces in all of the groups, including the through-and-through laceration group.     

Macrophage Polarization in Cardiac Tissue Repair Following Myocardial Infarction

Cardiovascular disease is the leading cause of mortality and morbidity around the globe, creating a substantial socio-economic burden as a result. Myocardial infarction is a significant contributor to the detrimental impact of cardiovascular disease. The death of cardiomyocytes following myocardial infarction causes an immune response which leads to further destruction of tissue, and subsequently, results in the formation of non-contractile scar tissue. Macrophages have been recognized as important regulators and participants of inflammation and fibrosis following myocardial infarction. Macrophages are generally classified into two distinct groups, namely, classically activated, or M1 macrophages, and alternatively activated, or M2 macrophages. The phenotypic profile of cardiac macrophages, however, is much more diverse and should not be reduced to these two subsets. In this review, we describe the phenotypes and functions of macrophages which are present in the healthy, as well as the infarcted heart, and analyze them with respect to M1 and M2 polarization states. Furthermore, we discuss therapeutic strategies which utilize macrophage polarization towards an anti-inflammatory or reparative phenotype for the treatment of myocardial infarction.     

Oxygen reduction activity of Pt and Pt-Mn-Co electrocatalysts sputtered on nano-structured thin film support

We report on extensive measurements of oxygen reduction activity of Pt and Pt-Co-Mn electrocatalysts using the rotating ring-disk electrode (RRDE) method. The electrocatalysts were prepared by sputtering from Pt or Pt, Co and Mn targets onto 3M's nano-structured thin film support (NSTF) structures. The area specific activity of Pt/NSTF, measured in 0.1 M HClO₄ and at room temperature, is similar to that of bulk Pt. The area specific measurements show a 20 mV reduction in the Pt-Co-Mn/NSTF overpotential compared to Pt/NSTF. The corresponding kinetic gain in the area specific activity of the ternary alloy is about a factor of two. This ORR enhancement factor observed in the ternary Pt-Co-Mn/NSTF by RRDE measurements is similar to the results obtained in 50 cm² H₂/air fuel cells.     

Buoyancy effects on gaseous slip flow in a vertical rectangular microchannel

Consideration is given to the buoyancy effects on the fully developed gaseous slip flow in a vertical rectangular microduct. Two different cases of the thermal boundary conditions are considered, namely uniform temperature at two facing duct walls with different temperatures and adiabatic other walls (case A) and uniform heat flux at two walls and uniform temperature at other walls (case B). The rarefaction effects are treated using the first-order slip boundary conditions. By means of finite Fourier transform method, analytical solutions are obtained for the velocity and temperature distributions as well as the Poiseuille number. Furthermore, the threshold value of the mixed convection parameter to start the flow reversal is evaluated. The results show that the Poiseuille number of case A is an increasing function of the mixed convection parameter and a decreasing function of the channel aspect ratio, whereas its functionality on the Knudsen number is not monotonic. For case B, the Poiseuille number is decreased by increasing each of the mixed convection parameter, the Knudsen number, and the channel aspect ratio.     

Energy-efficient control of nanosatellites during distributed region formation flying

In this paper, we present an energy-efficient method for distributed region formation flying of nanosatellites. The proposed framework consists of two concurrent sub-schemes that include estimation and formation. In the estimation sub-scheme, unlike the existing methods on satellite formation flying, that assume the availability of the reference orbital elements to all followers, here, a distributed estimator is developed so that the follower nanosatellites estimate the position of the leader in its orbital slot. In the formation sub-scheme, we consider a region formation strategy which is an efficient method in dealing with the formation of a large number of nanosatellites. We propose an optimal region following formation method based on the receding horizon control (RHC) using the estimated reference orbital elements. Subsequently, an algorithm is presented to solve the proposed energy-efficient formation flying method. Finally, the simulation result is presented that illustrates the purposed method improves the power consumption for each nanosatellite with respect to the existing non-optimal region formation flying controllers.     

Comparative evaluation of performance measures for human driving skills

In this paper, we evaluate the adequacy of several performance measures for the evaluation of driving skills between different drivers. This work was motivated by the need for a training system that captures the driving skills of an expert driver and transfers the skills to novice drivers using a haptic-enabled driving simulator. The performance measures examined include traditional task performance measures, e.g., the mean position error, and a stochastic distance between a pair of hidden Markov models (HMMs), each of which is trained for an individual driver. The emphasis of the latter is on the differences between the stochastic somatosensory processes of human driving skills. For the evaluation, we developed a driving simulator and carried out an experiment that collected the driving data of an expert driver whose data were used as a reference for comparison and of many other subjects. The performance measures were computed from the experimental data, and they were compared to each other. We also collected the subjective judgement scores of the driver’s skills made by a highly-experienced external evaluator, and these subjective scores were compared with the objective performance measures. Analysis results showed that the HMM-based distance metric had a moderately high correlation between the subjective scores and it was also consistent with the other task performance measures, indicating the adequacy of the HMM-based metric as an objective performance measure for driving skill learning. The findings of this work can contribute to developing a driving simulator for training with an objective assessment function of driving skills.     

Concept learning games

In this paper, we intend to have a game theoretic study on the concept learning problem in a multi-agent system. Concept learning is a very essential and well-studied domain of machine learning when it is studied under the characteristics of a multi-agent system. The most important reasons are the partiality of the environment perception for any agent and also the communication holdbacks, resulting into a deep need for a collaborative protocol in favor of multi-agent transactions. Here we wish to investigate multi-agent concept learning with the help of its components, thoroughly with a game theoretic taste, esp. on the pre-learning processes. Based on two standard notations, we address the non-unanimity of concepts, classification of objects, voting and communicating protocol, and also the learning itself. In such a game of concept learning, we consider a group of agents, communicating and consulting to upgrade their ontologies based on their conceptualizations of the environment. For this purpose, we investigate the problem in two separate and standard distinctions of game theory study, cooperation and competition. Several solution concepts and innovative ideas from the multi-agent realm are used to produce an approach that contains the reasoning process of the agents in this system. Some experimentations come at the end to show the functionality of our approach. These experimentations come distinctly for both cooperative and competitive views.