Tyrosine-dependent basolateral sorting signals are distinct from tyrosine-dependent internalization signals

Converting cysteine 543 to tyrosine in the influenza virus hemagglutinin (HA) introduces both a basolateral sorting signal and an internalization signal into the HA cytoplasmic domain. Another HA mutant, HA+8, contains eight additional amino acids at the end of the cytoplasmic domain that include a powerful internalization signal. HA+8 was also sorted efficiently to the basolateral surface of Madin-Darby canine kidney cells. The simplest explanation for the observation that multiple sorting phenotypes depend upon the same small amino acid sequence is that certain tyrosine-based internalization signals might also function as basolateral sorting signals. To test this hypothesis, second-site mutations were introduced into HA C543Y or HA+8 to determine if the internalization and basolateral sorting functions can be separated. For HA C543Y, the same sequence positions were important for both basolateral sorting and internalization, but the two functions responded differently to individual amino acid replacements, indicating that they were distinct. For HA+8, the basolateral sorting signal required the same tyrosine as the internalization signal, but did not share any other characteristics. Thus, even when basolateral sorting signals that depend on tyrosine overlap or are co-linear with internalizations signals, the two sorting processes are sensitive to different characteristics of the sequence.     

N-3 Polyunsaturated Fatty Acids Modulate In-Vitro T Cell Function in Type I Diabetic Patients

In this work, we assessed the in-vitro effects of eicosapentaenoic acid (EPA; C20:5n-3) and docosahexaenoic acid (DHA; C22:6n-3) (final concentration, 15 microM) on T cell blastogenesis, interleukin-2 and -4 (IL-2, IL-4) secretion, fatty acid composition and intracellular oxidative status in type I diabetic patients with or without complications. Con A stimulated lymphocyte proliferation, glucose uptake, intracellular reduced glutathione levels and catalase activity were lower in diabetics as compared to controls, regardless to the presence of complications. EPA and DHA diminished T-lymphocyte proliferation and IL-2 production but enhanced IL-4 secretion in both diabetic and control groups. No changes in the levels of reduced glutathione and in the activities of catalase and SOD were observed in control T cells cultured in the presence of EPA and DHA. However, in diabetic patients, addition of n-3 PUFA to culture induced an increase in T cell levels of reduced glutathione and hydroperoxide, and in activities of catalase and SOD. Low levels of arachidonic acid (C20:4n-6) were found in plasma membrane phospholipids of lymphocytes from diabetic patients compared to controls. Incubation of lymphocytes with EPA and DHA was associated with an incorporation of these fatty acids in membrane phospholipids. In conclusion, the beneficial effects of n-3 PUFA on T cell functions in type I diabetes could be attributed to their suppressive action and modulation of cytokine secretion, and to the improvement of intracellular oxidative status.     

Computation considerations and fast algorithms for calculating the diffraction integral

Abstract

One of the most basic optical ‘components’ is free-space propagation. A common approximation used when calculating the resultant field distribution after propagation is the Fresnel integral. This integral can be evaluated in two ways: directly or by using the angular spectrum. In this paper, we estimate the regions in which each mode of evaluation is preferable according to computing efficiency and accuracy considerations. A fast numerical algorithm is introduced for each region. The result is relevant also for the evaluation of the Rayleigh-Sommerfeld diffraction formula.     

The nature of choice in mass customized house building

There is a need to explore the actual uptake of specification options by clients in the context of the self-build housing industry. In so doing all the components in a house that can be customized were categorized so as to highlight the features that must be customizable and those that can be standardized. Through a longitudinal study of a German house builder, data from 16 projects over a 35-year time horizon have been collected. The extent of choice made in these projects has been determined by comparing the original standard building specification with the actual finalized fit-out specification of the project. In scrutinizing the collected data it became apparent that the number of changes made by the clients increased considerably over the timespan studied. More importantly, clients appreciated the freedom of choice as they were prepared to spend increasing amounts on customization. In particular specification options were made in the sanitary, internal design and façade categories. Moreover the results revealed that offering a high degree of choice is appropriate for most, but not all, components for the case house builder. Key areas for choice include those relating to sanitary ware and the façade.     

Polyvinylidene fluoride and polyetherimide hollow fiber membranes for CO2 stripping in membrane contactor

Porous polyvinylidene fluoride (PVDF) and polyetherimide (PEI) hollow fiber membranes incorporating polyethylene glycol (PEG) were prepared via spinning process for CO₂ membrane stripping. CO₂ loaded diethanolamine solution was used as liquid absorbent while N₂ was used as a strip gas. The characterization study of the fibers was carried out in terms of permeation test, contact angle measurement and liquid entry pressure (wetting pressure). Performance study via membrane contactor stripping was carried out at specific operating condition. The experimental results showed that PVDF membrane have high gas permeation, effective surface porosity and contact angle despite having lower liquid entry pressure in comparison with PEI membrane. PVDF-PEG membrane showed the highest stripping flux of 4.0 × 10⁻² mol m⁻² s⁻¹ at 0.7 ms⁻¹ compared to that of PEI membrane. Although the stripping flux for PEI-PEG membranes was slightly lower than PVDF membrane (e.g. 3.5 × 10⁻² mol m⁻² s⁻¹ at liquid velocity of 0.85 ms⁻¹), the membrane wetting pressure of PEI membrane is higher than hydrophobic PVDF membrane. Long term performance of both membranes showed severe flux reduction but started to level-off after 30 h of operation.     

Deposition thickness based high-throughput nano-imprint template

International Technology Roadmap for Semiconductors 2003 projected nano-imprint lithography has the potential of high throughput, sub-20 nm resolution, and low cost [S.Y. Chou, P.R. Krauss, P.J. Renstrom, Appl. Phys. Lett. 67 (1995) 3144; Science 272 (1996) 85, J.A. Rogers, C. Mirkin, Mater. Res. Bull. 26 (2001)]. For nano-imprint lithography, a template with 1X resolution is required. The existing industrial infrastructure for supporting deep ultra violet 4X photo masks by e-beam and/or a laser beam scanning writer does not offer pitch (center-to-center distance of an array of patterned lines) less than ∼60 nm [<http://public.itrs.net/2003ITRS>]. For nano-imprint lithography to be accepted across the industry, a reproducible simple fabrication process to make a high resolution, single emboss template is essential [L. Jay Guo, J. Phys. D: Appl. Phys. 37 (2004) R123-R141]. Here we show, a general fabrication method and fabricated nano-imprint templates with sub-15 nm template line width and 10 nm pitch length through out the entire 200 mm wafer, varying the deposition thickness of multiple alternate films, using atomic layer deposition. Although multilayer nano-imprint templates and their exciting use have been demonstrated, [W.J. Dauksher et al., J. Vac. Sci. Technol. B 22 (2004) 3306, B. Heidari, et al., The 49th international conference on electron, ion and photon beam technology and nanofabrication, Orlando, Florida, 2005, William M. Tong, et al., Proc. SPIE 5751 (2005) 46-55, N.A. Melosh, A. Boukai, F. Diana, B. Gerardot, A. Badolato, P.M. Petroff, J.R. Heath, Science 300 (2003) 112] such a small pitch was not shown and either complex lattice mismatch-based epitaxially grown films or unconventional etch chemistry was used. The bare necessity was a simple and economical fabrication process for a high throughput nano-imprint template. In that context, we have developed a template fabrication process using classical micro-fabrication techniques. Successful use of these techniques made the template fabrication process simple, economical, and expedient. Also a novel technique to provide flexible and accurate alignment for nanowire patterning has been described. In this technique, nanowire patterning is accomplished on the entire wafer with a single impression. Industry level batch-fabrication of our scheme illustrates its reproducibility and manufacturability. We anticipate, this simple, economical and time saving technique will help researchers and developers to perform their experiment on nano-scale feature patterned substrates easily and conveniently.     

Inhibition of enterotoxicogenic strains Bacillus cereus GT1 and Staphylococcus aureus S1 isolated from double white cream cheese

In this study three different food preservatives (sodium nitrate, sodium benzoate and sodium sorbate) were used to evaluate their effect on two enterotoxicogenic strains (Bacillus cereus GT1 and Staphylococcus aureus S1). A significant decrease in the viability and production of virulence factors was observed. Yet, obvious tolerance to increasing concentrations (from 1 to 6?g/l) of the three preservatives was recorded reflecting possible resistance mechanisms within the tested strains. The two strains were subjected to increasing doses of gamma radiation (1, 2, 3, 4, 5, 6, 7, 8, 9 and 10?kGy). Obvious correlation was observed between the initial counts of bacterial spores contaminating the products and the required dose for their complete elimination. Whereas the eliminating dose of B. cereus GT1 strain was 10?kGy only 4?kGy was sufficient to suppress the growth and virulence of S. aureus S1, reflecting its sensitivity to low doses of gamma irradiation. Also, inhibition of the two strains by probiotic strain Bacillus pumilus G4 was studied both in situ (in cheese) and in vitro (in culture media). The viable cell population of B. cereus GT1 increased from 10⁶ to 2.9?×?10⁸?CFU/g within 60?h in controls but decreased from 2.1?×?10⁶ to 2.3?×?10³?CFU/g after treatment with the probiotic strain. No viable count was observed after 60?h of incubation. Whereas, the viable cell population of S. aureus S1 increased from 10⁶ to 2.5?×?10⁸?CFU/g within 60?h in controls but decreased from 1.5?×?10⁶ to 4.3?×?10²?CFU/g after treatment with the probiotic strain. No viable count was observed after 54?h of incubation.     

Exploiting wheel slips of mobile robots to improve navigation performance

Improving navigation performance of autonomous wheeled mobile robot (WMR) in a dynamic unstructured environment requires improved maneuverability. In such cases, the dynamics of wheel slip may violate the ideal no-slip kinematic constraints generally used to model nonholonomic WMR. In this paper, a new method is proposed to tackle the modeling inadequacy that arises when slip is neglected by including both longitudinal and lateral slip dynamics into the overall dynamics of the WMR. This new model of the WMR provides a realistic simulation environment that can be utilized to develop model-based controllers to improve WMR navigation. In this paper, a dynamic planner with a path-following controller is designed to allow the WMR to navigate efficiently by autonomously regulating the generated traction force due to wheel slip. Extensive simulation results demonstrate the importance of the proposed modeling technique to capture slip phenomenon and the efficacy of the presented control technique to exploit such slip for better navigation performance.