A 3.3 V, 10 Bits, Clock-Feedthrough Compensated Switched-Current Second Order Sigma-Delta Modulator

This article presents a low-pass sigma-delta modulator for Analogue-to-Digital conversion. The circuit uses a switched-current technique which presents a well known drawback called clock feedthrough. This phenomenon induces an error on the output signal value. In order to cancel the clock feedthrough effect, we use a new method based on a current feedback loop. The circuit is designed in 0.8 μm AMS “Austria Mikro Systems” single poly CMOS process. Measurements of the modulator are performed under A/D converters characterisation system, and show 55 dB dynamic range at 2.048 MHz sampling rate with 8 kHz input frequency bandwidth. These characteristics are suitable for audio applications.     

Toward best maintenance practices in communications network management

Best maintenance practices in communications networks management are benchmarking standards that, if carefully implemented, will enhance the integrity, reliability and maintenance costs of communications networks. This paper defines best maintenance practices in communications network management within a concise framework encompassing measurable performance‐level goals as well as methods and procedures needed to achieve these goals. The best maintenance practice recommendations of this paper cover many segments of communications networks and services, including wireline and wireless networks as well as multiple network spaces and technologies. The paper also outlines certain recent trends in network maintenance and provides specific recommendations for action to be taken to ensure that best network maintenance practices are implemented and maintained. Copyright © 2005 John Wiley & Sons, Ltd.     

Ultrabroadband and Reconfigurable Transmissive Acoustic Metascreen

Passive acoustic wave manipulations are severely constrained by the narrow frequency bandwidth of acoustic metastructures. In this research, an unprecedented type of reconfigurable acoustic metascreen is proposed for broadband manipulations of transmitted acoustic waves. The conceived structure is composed of uniquely designed unit cells producing the modulation of the transmitted phase shift within the full 2π range with an excellent impedance matching with the background medium. By rationally arranging the reconfigurable elements within the metascreen based on the corresponding parameter profile, different phenomena and functionalities can be easily realized. As examples, acoustic focusing and acoustic bending are presented to showcase the performance of the proposed metascreen. We indeed numerically and experimentally demonstrate the ultra-broadband and reconfigurable features of our concept over an astonishing frequency range extending from 3 to 17 kHz, which covers the majority spectrum of the audible range of human hearing. Our work provides a unique and remarkable conceptual design of acoustic metascreen opening a promising and pragmatic route to conceive compact broadband acoustic devices, where wavefront manipulations on broadband sound signals or pulsed signals are required.     

Heterogeneous Wireless Networks: Configuration and Vertical Handoff Management

Vertical handoff is one of the most important issues for the next generation heterogeneous wireless networks. However, in many situations, unbeneficial vertical handoffs occur across intersystem heterogeneous networks cause network performance degradation. Therefore, we propose a novel configuration architecture that can be deployed in the next generation of wireless networks. Second, we propose a predictive and adaptive Vertical Handoff Decision Scheme that optimizes the handoff initiation time as well as selection of the most optimal network. The proposed vertical handoff decision algorithm considers the technology type as well as the Signal to Interference Ratio (SIR), the Mobile Station (MS) velocity, the user preferences, the applications requirements and the terminal capabilities as the most important factors to make vertical handoff decision. In order to minimize handoff costs, the proposed decision algorithm uses the dwell timer concept. The handoff costs are analyzed in terms of unnecessary and unbeneficial handoffs rate.The simulation results show that the reduction of unnecessary handoffs proposed in our vertical handoff decision scheme reduces the handoff blocking probability, the packets loss rate and the handoff overhead     

Distributed address auto configuration protocol for Manet networks

In heterogeneous network environments, the network connections of a multi-homed device may have significant bandwidth differential. For a multi-homed transmission protocol designed for network failure tolerance, such as SCTP, path selection algorithms for data transmission drastically affect performance. This article studies the effect of path bandwidth differential on the performance of retransmission strategies in multi-homing environments. It identifies that fast retransmission on an alternate path may cause receive buffer blocking when path bandwidth differential is significant and the receive buffer is limited. A theoretical model is proposed for selecting retransmission path during the fast retransmission phase, based on receive buffer and path conditions. From these observations and analysis results, this article proposes that path selection strategies for transmitting new data and retransmitted data should be decoupled. A new path selection scheme is proposed and evaluated through SCTP simulations.     

Performance evaluation of legacy QCN for multicast and multiple unicast traffic transmission

A multicast congestion control scheme is an interesting feature to control group communication applications such as teleconferencing tools and information dissemination services. This paper addresses a comparison between multiple unicast and multicast traffic congestion control for Carrier Ethernet. In this work, we proposed to study the quantized congestion notification (QCN), which is a layer 2 congestion control scheme, in the case of multicast traffic and multiple unicast traffic. Indeed, the QCN has recently been standardized as the IEEE 802.1Qau Ethernet Congestion Notification standard. This scheme is evaluated through simulation experiments, which are implemented by the OMNeT++ framework. This paper evaluates the reaction point start time congestion detection, feedback rate, loss rate, stability, fairness and scalability performance of the QCN for multicast traffic transmission and multiple unicast traffic transmission. This paper also draws a parallel between QCN for multicast traffic transmission and that for multiple unicast traffic transmission. Despite the benefit of integrating the multicast traffic, results show that performance could degrade when the network scales up. The evaluation results also show that it is probable that the feedback implosion problem caused by the bottlenecks could be solved if we choose to set the queue parameter Qeq threshold value at a high value, 75% of the queue capacity for instance. Copyright © 2016 John Wiley & Sons, Ltd.     

Optimum project for horizontal axis wind turbines ‘OPHWT’

The objective of this project ‘OPHWT’ is to develop an efficient numerical code, for the optimisation of the aerodynamic characteristics of horizontal axis wind turbines. A vortex model has been treated based on the lifting line theory.The circulation at the trailing edge is obtained by resolving the variational problem; consisting in find the optimal circulation on the lifting line of the wind turbine, by minimising the losses due to the induced velocities. The value of the circulation is further updated by virtue of a multiplicative factor obtained by maximising the torque.Confrontation of the results obtained with those of Maekawa, Sharpe, a Glauert's blade element momentum theory calculations and a developed simplified model, have revealed the potential of the optimum project in predicting improved and higher rotor performances.     

The inverse design of the wind turbine blade sections by the singularities method

The aerodynamic characteristics of wind turbines are closely related to the geometry of their blades. The innovation and the technological development of wind turbine blades can be centred on two tendencies. The first is to improve the shape of existing blades; the second is to design new shapes of blades. The aspiration in the two cases is to achieve an optimal circulation and hence enhancing some more ambitious aerodynamic characteristics. This paper presents an inverse design procedure, which can be adapted to both thin and thick wind turbine blade sections aiming to optimise the geometry for a prescribed distribution of bound vortices. A method for simulating the initial contour of the blade section is exposed, which simultaneously satisfy the aerodynamic and geometrical constraints under nominal conditions. A detailed definition of the function characterising the bound vortex distribution is presented. The inviscid velocity field and potential function distributions are obtained by the singularities method. In the design method implemented, these distributions and the circulation of bound vortices on the camber line of the blade profile, are used to rectify its camber in an iterative calculation leading to the final and optimal form of the blade section once convergence is attained. The scheme proposed has been used to design the entire blade of the wind turbine for a given span-wise distribution of bound circulation around the blade contour.     

TTT and CHT curing diagrams of water‐borne polycondensation resins on lignocellulosic substrates

Lignocellulosic substrates such as wood were found to have a marked modifying influence on both lower temperature and higher temperature zones of TTT and CHT diagrams during hardening of phenol–resorcinol–formaldehyde (PRF) and melamime–urea–formaldehyde (MUF) polycondensates. Although the modifying influence of the substrate on the higher temperature zone of CHT diagrams presented the same trend of what was already reported for phenol–formaldehyde (PF) and urea–formaldehyde (UF) polycondensates, marked differences from what reported in the literature were recorded for TTT diagrams of all these polycondensates as well for the lower temperature zones of the CHT diagrams on lignocellulosic substrates, both of which had not been investigated previously. The chemical and physical mechanisms of the interactions of the resins, the substrate, and the water carrier causing such marked variations are presented and discussed. Although in the higher temperature zones both substrate and water carrier play an important role, in the lower temperature zone the presence of water appears to be the dominant factor causing the observed variations. The generalized modified CHT and TTT diagrams characteristic of the behavior of these water‐borne polycondensates on lignocellulosic substrates can be used to describe the behavior and complex changes of phase the formaldehyde‐based polycondensation resins undergo when used as wood adhesives during their curing directly in the wood joint. The results also show that diagrams obtained with pure resin cannot be used to predict the behavior of the polycondensate when this is markedly modified by the presence of interacting solvents and substrates. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 2128–2139, 2001     

Crosslinking behavior of dextran modified with hydroxyethyl methacrylate upon irradiation with visible light—Effect of concentration,coinitiator type,and solvent

This study presents the synthesis of a crosslinkable dextran as starting material for the development of new hydrogels as drug delivery system in dental applications. 2‐Hydroxyethyl methacrylate (HEMA) was coupled to dextran after activation with carbonyldiimidazole as monitored by FTIR and ¹H‐NMR spectroscopy. The Dex‐HEMA was crosslinked by visible light in the presence of camphorquinone (CQ) as photoinitiator and a coinitiator in a proper solvent. Aliphatic or aromatic amines were used as coinitiators and the content of the coinitiator was varied from 0.25 to 3.0 mol %. Diphenyliodonium chloride was added as a third component to the above photoinitiation system. It was observed that, the degree of swelling decreased upon an increase of Dex‐HEMA concentration and the water content in the solvent system due to formation of more crosslinking points, that is, increasing crosslink density (P_x). The type of coinitiator shows a prominent impact on the swelling behavior and crosslinking efficiency of hydrogels. Special cryofixation and cryofracture techniques were used to investigate the surface and interior of swollen Dex‐HEMA hydrogel samples by SEM. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010