Effects of surface roughness of substrates on the c-axis preferred orientation of ZnO films deposited by r.f. magnetron sputtering

The c-axis preferred orientation of ZnO film is the most important factor for its successful application in piezoelectric devices. The effects of surface roughness of the substrate on the c-axis preferred orientation of ZnO thin films, deposited by radio frequency magnetron sputtering, were investigated. During sputtering, the oxygen content in the argon environment used was varied from 0 to 70% at a total sputtering pressure of 10 mTorr. Very smooth Si, smooth evaporated Au/Si, smooth evaporated-Al/Si, and rough sputtered-Al/Si were used as substrates. Their r.m.s. roughnesses, as measured by atomic force microscopy, were 1.27, 17.1, 21.1 and 65-118 Å, respectively. The crystalline structure and the angular spread of the (0 0* 2) plane normal to the ZnO films were determined using X-ray diffraction and X-ray rocking curves, respectively. The crystallinity and the preferred c-axis orientation of the ZnO films were strongly dependent on the surface roughness of the substrates rather than on the oxygen content of the working environment or on the chemical nature of the substrate.     

Advanced disturbance observer design for mechanical positioning systems

Disturbance-observer (DOB)-based controller design is one of the most popular methods in the field of motion control. In this paper, the generalized disturbance compensation framework, named the robust internal-loop compensator (RIC) is introduced and an advanced design method of a DOB is proposed based on the RIC. The mixed sensitivity optimization problem, which is the main issue of DOB design, is also solved through the parametrization of the DOB in the RIC framework. Differently from conventional methods, the Q-filter is separated from the mixed sensitivity optimization problem and a systematic design law for the DOB is proposed. This guarantees the robustness and optimality of the DOB and enables the design for unstable plants.     

Stochastic response of flexible rotor-bearing system to seismic excitations

Random vibration analysis of flexible rotor-bearing systems subjected to six-component nonstationary earthquake ground accelerations is carried out. The rotor system consists of several rigid disks and a flexible shaft that is modelled as a Timoshenko beam. The governing equations of motion involve both inhomogeneous random excitations and random parametric excitations. Analytically, the Markov vector approach using the Ito equation and Stratonovich averaging procedures is employed to determine the response statistics. Unfortunately, the second moments of the response quantities thus obtained involve a great discrepancy when compared with the results of Monte Carlo simulation. The difficulty involved in analytically solving such a complicated problem is pointed out. Currently, the method of Monte Carlo simulation appears to be the only practical approach for such a problem. The significant influence of the seismic base rotations and the flexibility of the rotor-bearing system on the overall dynamic structural response is demonstrated by a numerical example.     

Structural changes of PVC plastisols in progress of gelation and fusion as investigated with temperature-dependent viscoelasticity,morphology, and light scattering

The structural changes of poly(vinyl chloride) (PVC) plastisols during mixing of PVC with a plasticizer was investigated; as the temperature was increased, the system was found to transform from a suspension of solid particles in a liquid medium to a swollen gel and ultimately to a fused homogeneous matrix. The dynamic viscoelastic measurements were utilized to continuously monitor the changes of moduli under a controlled heating rate, employing a mechanical spectrometer. Characteristic changes in the viscoelastic behavior were associated with changes in particulate morphology as observed with a scanning electron microscope (SEM). Both viscoelastic and morphological observations were shown to provide details of structural changes in conjunction with the behavior of the PVC–plasticizer interaction, enabling a qualitative discrimination of the gelation and fusion processes. An in situ small-angle light-scattering (SALS) method was performed to make a quantitative estimate for the swollen particles of PVC while they were in the progress of gelation and fusion. From the manner of increase in correlation distances, along with the changes in viscoelastic moduli and morphology, the swelling behavior of the particulate structures were examined on the quantitative basis and brief insight into the complex behavior of the PVC–plasticizer interaction began to be unfolded. © 1995 John Wiley & Sons, Inc.     

A precision on-line model for the prediction of roll force and roll power in hot-strip rolling

Investigated via a series of finite-element (FE) process simulations is the effect of diverse process variables on some selected nondimensional parameters characterizing the thermomechanical behavior of the strip in hot-strip rolling. Then, on the basis of these parameters an on-line model is derived for the precise prediction of roll force and roll power. The prediction accuracy of the proposed model is examined through comparison with predictions from a FE process model and also with measurements.     

Formation of C4 species in the deactivation of a Pd/SiO2 catalyst during the selective hydrogenation of acetylene

The deactivation characteristics of Pd/SiO₂ in the selective hydrogenation of acetylene were correlated with changes in the amount of the C4 species produced. The amounts of butenes produced changed in parallel with the catalyst activity, indicating that the rate limiting step for butene production was the same as that for acetylene hydrogenation. On the other hand, the amount of 1,3-butadiene produced changed, showing a maximum with catalyst deactivation because 1,3-butadiene is an intermediate in the sequential reaction process which involves both the production and consumption of 1,3-butadiene. This was verified by a simultaneous TG/reaction experiment showing that 1,3-butadiene was a precursor of green oil. The catalyst showed a self-regenerative behavior in its activity and the amounts of C4 species produced during the early stage of deactivation because two opposite factors, which contributed to either the lowering or the promotion of activity, were involved in the process. A specific type of polymer species, produced during the initial period of deactivation, is proposed to be responsible for the promotion of catalyst activity.     

Energy release rates of crack kinking by boundary condition sensitivity analysis

The energy release rate, which is the total derivative of the energy with respect to crack length, is recognized as corresponding to the shape sensitivity analysis with the crack length change represented by the tangential component of design velocity. In this paper the sensitivity formula recently developed for a changing boundary condition has been further extended to cover crack kinking under mixed mode loading. Due to difficulty in defining the velocity field at the corner, the energy release rate at the onset of crack kinking is obtained by extrapolating the energy release rates for finite length kinked cracks. A rectangular plate with a single edge slant crack under uniform tension is taken as a numerical example. The multi-region technique in the numerical implementation of the boundary integral equation is adopted to consider the asymmetry of the problem. Excellent accuracy is observed as compared with reference analytic solutions.     

Casein Hydrolysate Fractions Act as Emulsifiers in Process Cheese

ABSTRACT: Degrees of hydrolysis and emulsifying activity of casein hydrolysates were the highest at 4 h hydrolysis. The oil-off values of the mixture of hydrolysate (H) or supernatant (S) and traditional emulsifier (T) were not significantly different from the control made with traditional emulsifier, except for S + T = 3:1. Two other samples made with hydrolysate or supernatant only (H or S) showed higher oil-off value than the others (p < 0.05). In flavor property, no difference was found between samples made with traditional emulsifier and those made with the mixture of hydrolysate or supernatant at the ratio of 3 to 1. Therefore, these results indicated that a mixture of the hydrolysate or supernatant and traditional emulsifier might replace a traditional emulsifier in process cheese manufacturing.