Particular behavior of spindle thermal deformation by thermal bending

Thermally induced errors reduce the accuracy in precision machining, and a great deal of research has been presented on compensation for these errors in machine tools. However, during the transition period after commencing or stopping spindle rotation, thermal deformation behavior is very complex. In particular, the y-directional movement of the vertical machining center cannot be explained by thermal expansion alone because of the relationship between deformation and temperature. Thermal bending that is generated from the thermal gradient in the structure causes this movement. In the research described in this paper, a theoretical explanation and an experimental verification is given for the particular behavior of spindle thermal deformation. As it is not easy to map the relationship of the compensation model, separation of the steady from the non-steady state in the mapping process is strongly recommended.     

Eicosapentaenoic acid (20∶5n-3) from the marine microalgaPhaeodactylum tricornutum

Eicosapentaenoic acid (EPA, 20∶5n-3) was obtained from the marine microalgaePhaeodactylum tricornutum by a three-step process: fatty acid extraction by direct saponification of biomass, polyunsaturated fatty acid (PUFA) concentration by formation of urea inclusion compounds, and EPA isolation by semipreparative high-performance liquid chromatography (HPLC). Alternatively, EPA was obtained by a similar two-step process without the PUFA concentration step by the urea method. Direct saponification of biomass was carried out with two solvents that contained KOH for lipid saponification. An increase in yield was obtained because the problems associated with emulsion formation were avoided by separating the biomass from the soap solution before adding hexane for extraction of insaponifiables. The most efficient solvent, ethanol (96%) at 60°C for 1 h, extracted 98.3% of EPA. PUFA were concentrated by the urea method with a urea/fatty acid ratio of 4∶1 at a crystallization temperature of 28°C and by using methanol and ethanol as urea solvents. An EPA concentration ratio of 1.73 (55.2∶31.9) and a recover yield of 78.6% were obtained with methanol as the urea solvent. This PUFA concentrate was used to obtain 93.4% pure EPA by semipreparative HPLC with a reverse-phase, C₁₈, 10 mm i.d.×25-cm column and methanol/water (1% acetic acid), 80∶20 w/w, as the mobile phase. Eighty-five percent of EPA loaded was recovered, and 65.7% of EPA present inP. tricornutum biomass was recovered in highly pure form by this three-step downstream process. Alternatively, 93.6% pure EPA was isolated from the fatty acid extract (without the PUFA concentration step) with 100% EPA recovery yield. This two-step process increases the overall EPA yield to 98.3%, but it is only possible to obtain 20% as much EPA as that obtained by three-step downstream processing.     

Spontaneously Embedded Scattering Structures in a Flexible Substrate for Light Extraction

A flexible hazy substrate (FHS) with embedded air bubbles to increase light extraction efficiency of organic light‐emitting diodes (OLEDs) is reported. In order to embed the air bubbles in the flexible substrate, micropatterned substrates are fabricated by plasma treatment, and then coated with a planarization layer. During the planarization layer coating, air bubbles are trapped between the substrate and the planarization layer. The haze of the FHS can be controlled from 1.7% to 68.4% by changing the size of micropatterns by adjusting the plasma treatment time. The FHS shows average haze of 68.4%, average total transmittance of 90.3%, and extremely flat surface with average roughness (R _a) of 1.2 nm. Rigorous coupled‐wave analysis and finite‐difference time‐domain simulations are conducted to demonstrate that the air bubbles in the substrate can effectively extract photons that are trapped in the substrate. The FHS increases the power efficiency of OLEDs by 22% and further increases by 91% combined with an external extraction layer. Moreover, the FHS has excellent mechanical flexibility. No defect has been observed after 10 000 bending cycles at bending radius of 4 mm.     

GraftFast Surface Engineering to Improve MOF Nanoparticles Furtiveness

Controlling the outer surface of nanometric metal–organic frameworks (nanoMOFs) and further understanding the in vivo effect of the coated material are crucial for the convenient biomedical applications of MOFs. However, in most studies, the surface modification protocol is often associated with significant toxicity and/or lack of selectivity. As an alternative, how the highly selective and general grafting GraftFast method leads, through a green and simple process, to the successful attachment of multifunctional biopolymers (polyethylene glycol (PEG) and hyaluronic acid) on the external surface of nanoMOFs is reported. In particular, effectively PEGylated iron trimesate MIL‐100(Fe) nanoparticles (NPs) exhibit suitable grafting stability and superior chemical and colloidal stability in different biofluids, while conserving full porosity and allowing the adsorption of bioactive molecules (cosmetic and antitumor agents). Furthermore, the nature of the MOF–PEG interaction is deeply investigated using high‐resolution soft X‐ray spectroscopy. Finally, a cell penetration study using the radio‐labeled antitumor agent gemcitabine monophosphate (³H‐GMP)‐loaded MIL‐100(Fe)@PEG NPs shows reduced macrophage phagocytosis, confirming a significant in vitro PEG furtiveness.     

A parameterized shared-memory scheme for parameterized metaheuristics

This paper presents a parameterized shared-memory scheme for parameterized metaheuristics. The use of a parameterized metaheuristic facilitates experimentation with different metaheuristics and hybridation/combinations to adapt them to the particular problem we are working with. Due to the large number of experiments necessary for the metaheuristic selection and tuning, parallelism should be used to reduce the execution time. To obtain parallel versions of the metaheuristics and to adapt them to the characteristics of the parallel system, a unified parameterized shared-memory scheme is developed. Given a particular computational system and fixed parameters for the sequential metaheuristic, the appropriate selection of parameters in the unified parallel scheme eases the development of parallel efficient metaheuristics.     

Proactive Human Search for the Designated Person with Prior Context Information in an Undiscovered Environments

This paper describes a scheme for proactive human search for a designated person in an undiscovered indoor environment without human operation or intervention. In designing and developing human identification with prior information a new approach that is robust to illumination and distance variations in the indoor environment is proposed. In addition, a substantial exploration method with an octree structure, suitable for path planning in an office configuration, is employed. All these functionalities are integrated in a message- and component-based architecture for the efficient integration and control of the system. This approach is demonstrated by succeeding human search in the challenging robot mission of the 2009 Robot Grand Challenge Contest.     

PIXHAWK: A micro aerial vehicle design for autonomous flight using onboard computer vision

We describe a novel quadrotor Micro Air Vehicle (MAV) system that is designed to use computer vision algorithms within the flight control loop. The main contribution is a MAV system that is able to run both the vision-based flight control and stereo-vision-based obstacle detection parallelly on an embedded computer onboard the MAV. The system design features the integration of a powerful onboard computer and the synchronization of IMU-Vision measurements by hardware timestamping which allows tight integration of IMU measurements into the computer vision pipeline. We evaluate the accuracy of marker-based visual pose estimation for flight control and demonstrate marker-based autonomous flight including obstacle detection using stereo vision. We also show the benefits of our IMU-Vision synchronization for egomotion estimation in additional experiments where we use the synchronized measurements for pose estimation using the 2pt+gravity formulation of the PnP problem.     

Enhanced carrier confinement in AlInGaN-InGaN quantum wells in near ultraviolet light-emitting diodes

To increase carrier confinement, the GaN barrier layer was substituted with an AlInGaN quaternary barrier layer which was lattice-matched to GaN in the GaN-InGaN multiple quantum wells (MQWs). Photoluminescence (PL) and high-resolution X-ray diffraction measurements showed that the AlInGaN barrier layer has a higher bandgap energy than the originally used GaN barrier layer. The PL intensity of the five periods of AlInGaN-InGaN MQWs was increased by three times compared to that of InGaN-GaN MQWs. The electroluminescence (EL) emission peak of AlInGaN-InGaN MQWs ultraviolet light-emitting diode (UV LED) was blue-shifted, compared to a GaN-InGaN MQWs UV LED and the integrated EL intensity of the AlInGaN-InGaN MQWs UV LED increased linearly up to 100 mA. These results indicated that the AlInGaN-InGaN MQWs UV LED has a stronger carrier confinement than a GaN-InGaN MQWs UV LED due to the larger barrier height of the AlInGaN barrier layer compared to a GaN barrier layer.