The Chemistry of DPPH· Free Radical and Congeners

Since the discovery in 1922 of 2,2-diphenyl-1-(2,4,6-trinitrophenyl) hydrazyl stable free radical (DPPH^·), the chemistry of such open-shell compounds has developed continuously, allowing for both theoretical and practical advances in the free radical chemistry area. This review presents the important, general and modern aspects of the chemistry of hydrazyl free radicals and the science behind it.     

Compressive properties of pristine and SiC-Te-added MgB2 powders,green compacts and spark-plasma-sintered bulks

Pristine and (SiC+Te)-added MgB₂ powders, green and spark plasma sintered (SPS) compacts were investigated from the viewpoint of quasi-static and dynamic (Split-Hopkinson Pressure Bar, SHPB) compressive mechanical properties The amount of the additive (SiC+Te) was selected to be the optimum one for maximization of the superconducting functional parameters. Pristine and added MgB₂ show very similar compressive parameters (tan δ, fracture strength, Vickers hardness, others) and fragment size in the SHPB test. However, for the bulk SPSed samples the ratio of intergranular to transgranular fracturing changes, the first one being stronger in the added sample. This is reflected in the quasi-static K_IC that is higher for the added sample. Despite this result, sintered samples are brittle and have roughly similar fragmentation behavior as for brittle engineering ceramics. In the fragmentation process, the composite nature of our samples should be considered with a special focus on MgB₂ blocks (colonies) that show the major contribution to fracturing. The Glenn-Chudnovsky model of fracturing under dynamic load provides the closest values to our experimental fragment size data.     

System identification from noisy measurements by using instrumental variables and subspace fitting

This paper considers the estimation of the parameters of a linear discrete-time system from noise-perturbed input and output measurements. The conditions imposed on the system are fairly general. In particular, the input and output noises are allowed to be auto-correlated and they may be cross-correlated as well. The proposed method makes use of an instrumental variable (IV)-vector to produce a covariance matrix that is pre- and postmultiplied by some prechosen weights. The singular vectors of the so-obtained matrix possess complete information on the system parameters. A weighted subspace fitting (WSF) method is then applied to the aforementioned singular vectors to consistently estimate the parameters of the system. The IV-WSF technique suggested herein is noniterative and easy to implement, and has a small computational burden. The asymptotic distribution of its estimation errors is derived and the result is used to motivate the choice of the weighting matrix in the WSF step and also to predict the estimation accuracy. Numerical examples are included to illustrate the performance achievable by the method.This work has been supported by the Swedish Research Council of Engineering Sciences under contract 93-669 and by the Göran Gustafsson Foundation.     

MODE-type algorithm for estimating damped, undamped, or explosive modes

We propose a new algorithm for estimating the parameters of damped, undamped, or explosive sinusoidal signals. The algorithm resembles the MODE algorithm, which is commonly used for direction of arrival estimation in the array signal processing field. It is derived as a natural approximation to an asymptotically (high-SNR) optimal parameter estimator and has excellent statistical accuracy. Nevertheless, it is computationally simple and easy to implement. Numerical examples are included to illustrate the performance of the proposed method.This work has been supported by the Swedish Research Council for Engineering Sciences (TFR).     

Hereditary neuralgic amyotrophy and hereditary neuropathy with liability to pressure palsies: two distinct clinical, electrophysiologic, and genetic entities

Fistulas secondary to Crohn's disease occur in about 33% of patients. A colobronchial fistula complicating Crohn's disease is very rare, having been reported only twice previously. We present an unusual fistula secondary to Crohn's colitis that originated from the splenic flexure and crossed the diaphragm to involve the bronchial tree.     

Ionoluminescence decay measured with single ions

A new ion beam analysis-based, single ion technique called the time to first photon has been developed to measure the decay of the luminescence signal of phosphors. Such measurements are currently needed to study luminescence decay mechanisms following high-density excitations and to identify strongly luminescent phosphor coatings with short lifetimes for ion photon emission microscopy (IPEM). The samples for this technique consist of thin phosphor layers placed or coated on the surface of PIN diodes. Single ions from an accelerator strike this sample and simultaneously create ion beam induced luminescence (IBIL) from the phosphor that is measured by a single-photon-detector, and an ion beam induced charge collection (IBICC) signal in the PIN diode. In this case, the IBICC signal provides the start pulse and the IBIL signal the stop pulse to a time to amplitude converter. It is straightforward to show that this approach also measures a signal proportional to activity versus time with an accuracy of 5% as long as the number of detected photons per ion is less than 0.1, which usually requires the use of absorbers for the IBIL detector or electronic discrimination for the IBIL signals. Details of the new analysis are given together with examples of luminescence decay measurements of several ceramic phosphors being considered to coat IPEM samples. IPEM is currently being developed at Sandia National Laboratory (SNL), the University of North Texas in Denton, and the Universities and INFN of Padova and Torino.     

Correlation between left ventricular hypertrophy and GAA trinucleotide repeat length in Friedreich's ataxia

BACKGROUND: Friedreich's ataxia (FA), the most common inherited ataxia, is associated frequently with cardiac hypertrophy, and death is often cardiac related. Recently, the disease has been associated with a mutation that consists of an unstable expansion of GAA repeats in the first intron of the gene encoding frataxin on chromosome 9. METHODS AND RESULTS: We studied 44 consecutive patients with FA, determined the size of GAA expansions in the frataxin gene, and examined the relation between the genotype and cardiac phenotype assessed by M-mode and two-dimensional echocardiography. All the patients were homozygous for the mutation. The size of the GAA expansion on the smaller allele varied from 270 to 1200. We found a correlation between the size of GAA expansion and the left ventricular wall thickness (r = .51, P < .001) and the left ventricular mass index (r = .45, P = .002). Left ventricular hypertrophy was observed in 81% of patients with a number of GAA repeats above the median value of 770 compared with only 14% in the other group (P = .002). CONCLUSIONS: These data demonstrate that in FA, the severity of left ventricular hypertrophy is related to the number of GAA repeats. These results suggest that abnormalities of the gene encoding frataxin, a protein of unknown function highly expressed in the normal heart, may play an important role in the modulation of cardiac hypertrophy.     

The right view from the wrong location: depth perception in stereoscopic multi-user virtual environments

Stereoscopic depth cues improve depth perception and increase immersion within virtual environments (VEs). However, improper display of these cues can distort perceived distances and directions. Consider a multi-user VE, where all users view identical stereoscopic images regardless of physical location. In this scenario, cues are typically customized for one "leader" equipped with a head-tracking device. This user stands at the center of projection (CoP) and all other users ("followers") view the scene from other locations and receive improper depth cues. This paper examines perceived depth distortion when viewing stereoscopic VEs from follower perspectives and the impact of these distortions on collaborative spatial judgments. Pairs of participants made collaborative depth judgments of virtual shapes viewed from the CoP or after displacement forward or backward. Forward and backward displacement caused perceived depth compression and expansion, respectively, with greater compression than expansion. Furthermore, distortion was less than predicted by a ray-intersection model of stereo geometry. Collaboration times were significantly longer when participants stood at different locations compared to the same location, and increased with greater perceived depth discrepancy between the two viewing locations. These findings advance our understanding of spatial distortions in multi-user VEs, and suggest a strategy for reducing distortion.     

Robust‐Adaptive Control Strategies for a Time Delay Bioelectrochemical Process Using Interval Observers

The paper addresses the design and the analysis of adaptive and robust‐adaptive control strategies for a complex recycled wastewater treatment bioprocess. The design procedures are developed under the realistic assumptions that the bacterial growth rates are unknown and the influent flow rates are time‐varying and uncertain, but some lower and upper bounds of these uncertainties are known. The proposed control structures are achieved by combining a linearizing control law with an appropriately (asymptotic or interval based) state observer and with a parameter estimator used for on‐line estimation of unknown kinetics. These approaches are applied to a complex time delay bioprocess resulting from the association of a recycling bioreactor with an electrochemical reactor. Numerical simulations are performed in order to validate the proposed algorithms.