Histone Methylation Marks on Circulating Nucleosomes as Novel Blood-Based Biomarker in Colorectal Cancer

Circulating nucleic acids (CNAs) are under investigation as a liquid biopsy in cancer as potential non-invasive biomarkers, as stable structure in circulation nucleosomes could be valuable sources for detection of cancer-specific alterations in histone modifications. Our interest is in histone methylation marks with a focus on colorectal cancer, one of the leading cancers respective the incidence and mortality. Our previous work included the analysis of trimethylations of lysine 9 on histone 3 (H3K9me3) and of lysine 20 on histone 4 (H4K20me3) by chromatin immuno- precipitation-related PCR in circulating nucleosomes. Here we asked whether global immunologic measurement of histone marks in circulation could be a suitable approach to show their potential as biomarkers. In addition to H3K9me3 and H4K20me3 we also measured H3K27me3 in plasma samples from CRC patients (n = 63) and cancer free individuals (n = 40) by ELISA-based methylation assays. Our results show that of three marks, the amounts of H3K27me3 (p = 0.04) and H4K20me3 (p < 0.001) were significantly lower in CRC patients than in healthy controls. For H3K9me3 similar amounts were measured in both groups. Areas under the curve (AUC) in receiver operating characteristic (ROC) curves indicating the power of CRC detection were 0.620 for H3K27me3, 0.715 for H4K20me3 and 0.769 for the combination of both markers. In conclusion, findings of this preliminary study reveal the potential of blood-based detection of CRC by quantification of histone methylation marks and the additive effect of the marker combination.     

Mechanical behaviour of SiC fibre-reinforced titanium/titanium aluminide hybrid composites

The viability of developing an SiC fibre-reinforced titanium/titanium aluminide hybrid matrix composite was explored. The hybrid composites are expected to be used at temperatures beyond those attainable in conventional titanium matrix composites while improving the damage tolerance of the titanium aluminide matrix composites. The room-temperature mechanical characteristics studied were tensile strength, fracture toughness, low-cycle fatigue life and fatigue crack growth rate. The mechanisms of damage initiation and propagation under various loading conditions were also characterized. The directions for developing a satisfactory composite with hybrid titanium/titanium aluminide matrix are also addressed.     

Synthesis and characterization of novel polyacrylate-clay sol-gel materials

Organo-functional silanes which were able to form chemical bonds with kaolinite and could also have an affinity to the materials of concern here, were studied by the sol-gel process. Polymethacrylate with trialkoxy silyl functional groups were prepared, hydrolysed and co-condensed with kaolinite. The progress of the hydrolysis, which proceeded very slowly, was followed by Karl-Fischer titration. Thermal behavior was investigated by differential thermal analysis. The extent of the reaction leading to network formation was qualitatively followed by Fourier transform-infrared spectroscopy and X-ray diffraction. Free-radical polymerization was carried out ultrasonically in the presence of a catalyst. Trimethoxy silane end-capped silane was found to be covalently bonded to kaolinite. The copolymers, with various amounts of kaolinite, were then hydrolysed and co-condensed in the presence of a catalyst to yield sol-gel materials which have a controllable combination of properties of both the polymer and kaolinite.     

A hyperheuristic approach to examination timetabling problems: benchmarks and a new problem from practice

Many researchers studying examination timetabling problems focus on either benchmark problems or problems from practice encountered in their institutions. Hyperheuristics are proposed as generic optimisation methods which explore the search space of heuristics rather than direct solutions. In the present study, the performance of tournament-based hyperheuristics for the exam timetabling problem are investigated. The target instances include both the Toronto and ITC 2007 benchmarks and the examination timetabling problem at KAHO Sint-Lieven (Ghent, Belgium). The Toronto and ITC 2007 benchmarks are post-enrolment-based examination timetabling problems, whereas the KAHO Sint-Lieven case is a curriculum-based examination timetabling problem. We drastically improve the previous (manually created) solution for the KAHO Sint-Lieven problem by generating a timetable that satisfies all the hard and soft constraints. We also make improvements on the best known results in the examination timetabling literature for seven out of thirteen instances for the To ronto benchmarks. The results are competitive with those of the finalists of the examination timetabling track of the International Timetabling Competition.     

Corrosion behavior of tempered dual-phase steel embedded in concrete

Dual-phase(DP) steels with different martensite contents were obtained by appropriate heat treatment of an SAE1010 structural carbon steel,which was cheap and widely used in the construction industry. The corrosion behavior of DP steels in con-crete was investigated under various tempering conditions. Intercritical annealing heat treatment was applied to the reinforcing steel to obtain DP steels with different contents of martensite. These DP steels were tempered at 200,300,and 400°C for 45 min and then coo...     

Using a conductive sphere as a probe to characterize the sensitivity of soft piezoresistive films

Flexible piezoresistive films, such as, carbon black/polydimethylsiloxane (C-PDMS) composites, are often used as skin analogs and integrated into complex array sensors for tactile sensing. The uniformity of the sensor characteristics heavily depends on the homogeneity of the composite. Therefore, the ability to locally characterize a film that will be integrated into a complex force sensor could be critical. Here, a method to characterize the local sensitivity of flexible piezoresistive films is presented. Using a conductive sphere, which was chosen over a flat probe to eliminate misalignment issues, the surface of a thin film composite is indented to characterize the change in resistivity in terms of average strain. Experiments were performed with 15 and 18 wt% carbon black C-PDMS films of varying thickness. The contact radius of the probe with the piezoresistive film was estimated using the Johnson-Roberts-Kendall contact theory. Theoretical contact area estimates were found to agree with contact radius measurements carried out using optically transparent PDMS films observed through an optical microscope. Results show that C-PDMS with 15 wt% carbon black exhibit a higher rate if change of resistivity and gauge factor than films of same thickness with 18 wt% carbon black. On the other hand, thicker films exhibit higher gauge factors for the two tested carbon black contents. Tests carried out at multiple locations yielded consistent sensitivity values, making these types of composites suitable for array type force sensors.     

Dispersion-strengthening effect of Cu-based Mn, Al, and Zn rich alloys

In this systematic study, dispersion-strengthening effect of the Cu–25.91Mn (wt.%), Cu–26.62Mn–8.99Al (wt.%), Cu–22.17Mn–12.32Zn (wt.%) ingot alloys have been investigated. Samples were homogenized at a high fixed temperature in different periods and cooled with different cooling rates. After processes, microanalysis of the samples were interpreted by using scanning electron microscope (SEM) and weight percentages of the elements of the occurrence phases in the samples obtained by using electron dispersion spectroscopy (EDS) technique. Additionally, some characteristic properties of the heat treated samples with different conditions of Cu–Mn, Cu–Mn–Al, Cu–Mn–Zn ingot alloys were also discussed.     

Biodegradable Microparticles for Simultaneous Detection of Counterfeit and Deteriorated Edible Products

In an era of globalized trade relations where food and pharmaceutical products cross borders effortlessly, consumers face counterfeit and deteriorated products at elevated rates. This paper presents multifunctional, biodegradable hydrogel microparticles that can provide information on the authenticity and the potential deterioration of the tagged food or pharmaceutical formulations. These microparticles integrate spatially patterned authenticity code with two sensors—the first one detects possible presence of pathogenic microbes through monitoring pH while the second one identifies products stored above optimal temperatures via optical monitoring of the microparticle degradation. Particles are synthesized from a biocompatible polymer and a photoinitiator, dextran modified with 2‐hydroxyethylmethacrylate and riboflavin, respectively, using a continuous, high throughput method stop‐flow lithography. The proposed synthesis approach also enables crosslinking with visible light bringing about additional flexibility to flow lithography. Model liquid and solid food and pharmaceutical products are successfully labeled with microparticles and the functionality of the sensors in aqueous solutions is demonstrated.     

An industry experiment on the effects of test-driven development on external quality and productivity

Existing empirical studies on test-driven development (TDD) report different conclusions about its effects on quality and productivity. Very few of those studies are experiments conducted with software professionals in industry. We aim to analyse the effects of TDD on the external quality of the work done and the productivity of developers in an industrial setting. We conducted an experiment with 24 professionals from three different sites of a software organization. We chose a repeated-measures design, and asked subjects to implement TDD and incremental test last development (ITLD) in two simple tasks and a realistic application close to real-life complexity. To analyse our findings, we applied a repeated-measures general linear model procedure and a linear mixed effects procedure. We did not observe a statistical difference between the quality of the work done by subjects in both treatments. We observed that the subjects are more productive when they implement TDD on a simple task compared to ITLD, but the productivity drops significantly when applying TDD to a complex brownfield task. So, the task complexity significantly obscured the effect of TDD. Further evidence is necessary to conclude whether TDD is better or worse than ITLD in terms of external quality and productivity in an industrial setting. We found that experimental factors such as selection of tasks could dominate the findings in TDD studies.     

A study of ergonomics factors in washbasin design

A 4-week UNESCO-sponsored mission to the Department of Architecture, Karadeniz Technical University in Eastern Turkey, gave an opportunity to apply ergonomics techniques to some aspects of that country's domestic washbasin design. The study was intended to provide experience in questionnaire design and administration, in the application of psycho-physical methods, and to highlight the importance of determining user characteristics and preferences with regard to the built environment. A field study elicited information on dimensions and positioning of existing wash-basins and ancillary equipment and the opinions of users as to the suitability of these features in relation to the activities performed. A laboratory study, using an adjustable rig permitting variation in the heights of basin, taps and mirror/shelf, followed. The data obtained on preferred heights of these items led to the conclusions that basin height should be increased to between 95 and 100 cm to satisfy the majority of users; tap height above the basin should be reduced to about 11 cm; the shelf and lower edge of a mirror sited above the basin should be 136 cm above the floor; and a clear space of 110 cm should be available between the front of the basin and a wall or other obstruction. Suggestions on other design aspects of the bathroom, resulting from the study, are discussed.