Possibilities and problems with the use of models as a communication tool in water resource management

Politicians and policy-makers, as well as modellers, often nurses an expectation that model derived results is an objective source of information that can be used to support decisions. However, several prerequisites have to be dealt with in order to ensure that models can be used as legitimate and efficient tools in water resource management. Based on empirical material from recent studies on the use of models in stakeholder dialogues, mainly focusing on catchment nutrient transport, two central problems are identified: (a) Models are laden with choices and thus depend on assumptions and priorities of modellers. (b) There are several factors that influence ability and willingness of stakeholders (as information recovers) to criticize or accept results of the modelling exercise. Recognized factors likely to influence stakeholders' acceptance of model derived results include issues at stake, stakeholders' ability to criticize model derived information, and their trust in the institutions that have developed or applied the used models. Identified prerequisites for successful use of models in integrated water resource management include: consideration of user relevance, awareness of and preparedness to handle constraints linked to communication of model-based results, transparency of used models and data and of involved uncertainties, mutual respect between experts and stakeholders and between involved stakeholder groups, a robust institutional network, and sufficient time for dialogues. Development and use of strategies for participatory modelling, based on a continuous dialogue between experts and stakeholders is recommended as a way to facilitate that the prerequisites for a successful use of models in water resource management are fulfilled.     

Unveiling the presence of mixed oxidation states of Europium in Li7+δEuxLa3−δZr2−δO12−δ garnet and its impact on the Li-ion conductivity

Recently, lanthanides have been employed by researchers to examine their impact on the structure and properties of Li₇La₃Zr₂O₁₂ (LLZO) garnets. In this regard, we developed Europium oxide (Eu₂O₃) doped LLZO (Li_7+δEu_xLa_3−δZr_2−δO_12−δ) solid electrolyte which demonstrates a cubic phase with the symmetry of Iad (No.230) at room temperature. In this investigation, different concentrations of Eu ranging from 0.1 to 0.6 atoms per formula unit (pfu) were doped into Li₇La₃Zr₂O₁₂ to evaluate the impact of Eu on the stability of the cubic phase and thereby the ionic conductivity. The results unveiled that upon doping Eu³⁺ ions, the Eu²⁺ state is also formed and is then self-doped into the structure in which Rietveld refinement coupled with XPS, EPR, and solid-state NMR suggests that Eu³⁺ ions most probably partially occupy Zr⁴⁺ (16a) site, the Eu²⁺ ions occupy La³⁺ (24d) site, and the Li⁺ ions occupy two different sites (24d and 96h). It was further found that such a site preference induces distortion at LaO₈ polyhedrons opening up the neck for Li-ions diffusion, thereby enhancing the ionic conductivity. Moreover, it was revealed that Li-ions probably hop from 96h to 24d and then to 96h site to generate the Li-ion movement. Overall, by introducing Eu ions into the LLZO structure, an enhanced bulk ionic conductivity of 0.30 × 10⁻³ S/cm at 298 K with a minimum electronic conductivity of 2.547 × 10⁻⁹ S/cm at 298 K was achieved.     

Latent heat energy storage characteristics of building composites of bentonite clay and pumice sand with different organic PCMs

In the present work, six new kinds of building composite PCMs (BCPCMs), PS/octadecane, BC/octadecane, PS/CA–MA, BC/CA–MA, PS/PEG1000, and BC/PEG1000 composites, were prepared by using vacuum impregnation method. The maximum percent of PCM in the composites was assigned to be 12, 13, 18, 23, 30, and 42 wt%, respectively. The form‐stable BCPCMs were characterized using SEM, FT‐IR, DSC, and TG analysis techniques. The characterization results showed the existence of homogenous dispersion of the PCM into the PBM matrixes. The DSC measurements indicated that the melting temperatures of the form‐stable BCPCMs are in the range of 20–33°C while they have latent heats of melting in the range of about 28–55 J/g. These results make them promising BCPCMs for low temperature‐passive TES applications in buildings. Thermal cycling test indicated that the prepared BCPCMs have good thermal reliability and chemical stability. TG analysis proved that the prepared BCPCMs have good thermal durability. In addition, the thermal conductivity of BCPCMs was enhanced considerably by addition of expanded graphite (EG). The improvement in thermal conductivity of the BCPCMs caused appreciably reduction in their melting times. Copyright © 2014 John Wiley & Sons, Ltd.     

Characterization of nanocomposite resol resins: Individual/synergist effects of alendronic acid and sepiolite

Alendronic acid modified resol nanocomposite resins (AA‐PFNCRs) and sepiolite modified resol nanocomposite resins (SEP‐PFNCRs) have been synthesized by in situ method in the presence of base catalyst. Additionally, the synergistic effects of alendronic acid and sepiolite clay (AA‐SEP‐PFNCR) on the resol resin have been studied. The structure, morphology, and thermal properties of these nanocomposites have been investigated by Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), Thermogravimetric Analysis (TGA), and X‐ray Diffraction (XRD). The results demonstrated the interactions between the fillers and resol resin. Thermal properties of nanocomposite resins were improved due to alendronic acid and sepiolite. The obtained samples were also characterized morphologically by Scanning Electron Microscope (SEM). © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43807.     

Quasistatic TEM characteristics of overlayed supported asymmetric coplanar waveguides

CAD-oriented analytic formulas are presented for calculating the quasistatic TEM parameters of the overlayed supported asymmetric coplanar waveguides (OSACPW). The effect of the thicknesses and the dielectric constants of the overlaying and supporting materials on the quasistatic parameters has been investigated by using the expressions derived by the conformal mapping techniques. Comparisons have also been made between this article's results and the results available in the literature for the conventional coplanar waveguide (CPW) and the asymmetric coplanar waveguide (ACPW). It has been shown that the present formulas can also be used for calculating the quasistatic TEM parameters of the line structures such as the open, the open supported, and the overlayed supported CPW or ACPW. © 1996 John Wiley & Sons, Inc.     

Preparation of poly(methyl methacrylate-co-ethylene glycol dimethacrylate-co-glycidyl methacrylate) walled thermochromic microcapsules and their application to cotton fabrics

This study focused on fabrication of the thermochromic microcapsules and their application to the cotton fabric. In this study, thermochromic systems composed of crystal violet lactone, bisphenol A, and 1-tetradecanol were prepared and microencapsulated by emulsion polymerization method in poly(methyl methacrylate-co-ethylene glycol dimethacrylate-co-glycidyl methacrylate) wall. The microcapsules were analyzed by Fourier transform infrared spectroscopy, scanning electron microscope, transmission electron microscope, differential scanning calorimetry, and thermogravimetric analysis. Their thermoregulating property was tested by T-history test. The results revealed that microcapsules with smooth surfaces, core–shell structured, and spherical shape were successfully produced. The latent heat storage capacity of the microcapsules decreased from 202 J g⁻¹ to 167 J g⁻¹ when their shell/core ratio changed from 0.5/1 to 2/1. Microcapsules were adequately had sufficient thermal resistance to the temperatures they will encounter during their application to textile products and their usage. According to the UV–visible spectroscopy analysis and color measurements, the microcapsules exhibited reversible color change from blue to colorless and vice versa. Besides, the microcapsule impregnated fabric was able to absorb latent heat energy of 21.79 J g⁻¹ at around 35 °C and had cooling effect. According to the colorimetric parameters, the fabric was at blue color at room temperature and became colorless when heated to the temperature above the melting point of thermochromic system. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48815.     

Fatty acid/poly(methyl methacrylate) (PMMA) blends as form-stable phase change materials for latent heat thermal energy storage

Fatty acids such as stearic acid (SA), palmitic acid (PA), myristic acid (MA), and lauric acid (LA) are promising phase change materials (PCMs) for latent heat thermal energy storage (LHTES) applications, but high cost is the most drawback which limits the utility area of them in thermal energy storage. The use of fatty acids as form-stable PCM will increase their feasibilities in practical LHTES applications due to reduced cost of the energy storage system. In this regard, a series of fatty acid/poly(methyl methacrylate) (PMMA) blends, SA/PMMA, PA/PMMA, MA/PMMA, and LA/PMMA were prepared as new kinds of form-stable PCMs by encapsulation of fatty acids into PMMA which acts as supporting material. The blends were prepared at different mass fractions of fatty acids (50, 60, 70, 80, and 90% w/w) to reach maximum encapsulation ratio. All blends were subjected to leakage test by heating the blends over the melting temperature of the PCM. The blends that do not allow leakage of melted PCM were identified as form-stable PCMs. The form-stable fatty acid/PMMA (80/20 wt.%) blends were characterized using optic microscopy (OM), viscosimetry, and Fourier transform infrared (FT-IR) spectroscopy methods, and the results showed that the PMMA was compatible with the fatty acids. In addition, thermal characteristics such as melting and freezing temperatures and latent heats of the form-stable PCMs were measured by using differential scanning calorimetry (DSC) technique and indicated that they had good thermal properties. On the basis of all results, it was concluded that form-stable fatty acid/PMMA blends had important potential for some practical LHTES applications such as under floor space heating of buildings and passive solar space heating of buildings by using wallboard, plasterboard or floor impregnated with a form-stable PCM due to their satisfying thermal properties, easily preparing in desired dimensions, direct usability without needing an add encapsulation and eliminating the thermal resistance caused by shell and thus reducing cost of LHTES system.     

Hydrogen transfer during co-liquefaction of Elbistan lignite and biomass: liquid product characterization approach

In this study, Elbistan lignite (EL) and manure were liquefied under catalytic conditions in an inert atmosphere. Red mud, tetralin, and distilled water were used as a catalyst and solvent, respectively. The liquefaction studies were carried out under catalytic conditions in the catalyst concentration of 9%, solvent/solid ratio of 3/1, reaction time of 60 min, waste/lignite ratio of 1/3, and at temperature of 400°C. Stirring speed and initial nitrogen pressure were kept constant at 400 rpm and 20 bar, respectively. At the end of liquefaction process, the soluble liquefaction products were separated by successive solvent extraction to preasphaltene, asphaltene, and oils. Oil products characterized by H-NMR to be able to differ hydrogen transfer from manure to EL surface. To obtain the hydrogen transfer way, liquefaction experiments conducted under inert atmosphere which does not related to hydrogen reaction, other above experimental conditions were kept same but only solvent type changed. The reason of using distilled water instead of tetraline is tetraline known as hydrogen donor but not water. Because water behaves supercritical conditions during the liquefaction stage. EL liquefied alone while using tetraline however EL liquefied with manure with using distilled water as a solvent. The obtained oil products form both experiments characterized by H-NMR. The radical groups diffraction and range values are not changed significantly shows that manure behaved as an hydrogen donor. So, EL with manure is the one great option to reduce cost of hydrogen source for direct coal liquefaction plant.     

Leaching kinetics of colemanite by aqueous EDTA solutions

The dissolution kinetics of colemanite, a boron-containing mineral, in aqueous disodium EDTA solutions were studied. The effects of concentration and pH of the solution, particle size, and temperature were examined. A decrease in pH and particle size increased the dissolution rate, while an increase in the concentration of the solution and temperature increased the rate. The activation energy and pre-exponential factor were calculated as 50.6 kJ mol^-1 and 5.14 x 10⁷ m s^-1, respectively. Mahir Alkan, Assistant Professor, formerly with Atatürk University, Kazim Karabekir Faculty of Education