As the number falls,alternatives to the Hagberg–Perten falling number method: A review

This review examines the application, limitations, and potential alternatives to the Hagberg–Perten falling number (FN) method used in the global wheat industry for detecting the risk of poor end-product quality mainly due to starch degradation by the enzyme α-amylase. By viscometry, the FN test indirectly detects the presence of α-amylase, the primary enzyme that digests starch. Elevated α-amylase results in low FN and damages wheat product quality resulting in cakes that fall, and sticky bread and noodles. Low FN can occur from preharvest sprouting (PHS) and late maturity α-amylase (LMA). Moist or rainy conditions before harvest cause PHS on the mother plant. Continuously cool or fluctuating temperatures during the grain filling stage cause LMA. Due to the expression of additional hydrolytic enzymes, PHS has a stronger negative impact than LMA. Wheat grain with low FN/high α-amylase results in serious losses for farmers, traders, millers, and bakers worldwide. Although blending of low FN grain with sound wheat may be used as a means of moving affected grain through the marketplace, care must be taken to avoid grain lots from falling below contract-specified FN. A large amount of sound wheat can be ruined if mixed with a small amount of sprouted wheat. The FN method is widely employed to detect α-amylase after harvest. However, it has several limitations, including sampling variability, high cost, labor intensiveness, the destructive nature of the test, and an inability to differentiate between LMA and PHS. Faster, cheaper, and more accurate alternatives could improve breeding for resistance to PHS and LMA and could preserve the value of wheat grain by avoiding inadvertent mixing of high- and low-FN grain by enabling testing at more stages of the value stream including at harvest, delivery, transport, storage, and milling. Alternatives to the FN method explored here include the Rapid Visco Analyzer, enzyme assays, immunoassays, near-infrared spectroscopy, and hyperspectral imaging.     

Automatic image hanging protocol for chest radiographs in PACS.

Chest radiography is one of the most widely used techniques in diagnostic imaging. It comprises at least one-third of all diagnostic radiographic procedures in hospitals. However, in the picture archive and communication system, images are often stored with the projection and orientation unknown or mislabeled, which causes inefficiency for radiologists' interpretation. To address this problem, an automatic hanging protocol for chest radiographs is presented. The method targets the most effective region in a chest radiograph, and extracts a set of size-, rotation-, and translation-invariant features from it. Then, a well-trained classifier is used to recognize the projection. The orientation of the radiograph is later identified by locating the neck, heart, and abdomen positions in the radiographs. Initial experiments are performed on the radiographs collected from daily routine chest exams in hospitals and show promising results. Using the presented protocol, 98.2% of all cases could be hung correctly on projection view (without protocol, 62%), and 96.1% had correct orientation (without protocol, 75%). A workflow study on the protocol also demonstrates a significant improvement in efficiency for image display.     

Reciprocal Relationships Between Collective Efficacy and Team Performance in Women's Ice Hockey.

This study examined reciprocal relationships between collective efficacy and team performance over a season of competition in women's intercollegiate ice hockey within weekends where the opponent was constant for 2 games. Collective efficacy beliefs within 12 teams were assessed prior to both games for at least 7 weekends. Team performance indexes produced an overall measure of performance for each game. The average influence of Saturday collective efficacy on Saturday performance was moderate and positive after controlling for Friday performance. The average influence of Friday performance on Saturday collective efficacy was small and positive after removing the influence of Friday collective efficacy from Friday performance. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Effects of introduced aspartic and glutamic acid residues on the P'1 substrate specificity, pH dependence and stability of carboxypeptidase Y

Carboxypeptidase Y is a serine carboxypeptidase isolated from Saccharomyces cerevisiae with a preference for C-terminal hydrophobic amino acid residues. In order to alter the inherent substrate specificity of CPD-Y into one for basic amino acid residues in P'1, we have introduced Asp and/or Glu residues at a number of selected positions within the S'1 binding site. The effects of these substitutions on the substrate specificity, pH dependence and protein stability have been evaluated. The results presented here demonstrate that it is possible to obtain significant changes in the substrate preference by introducing charged amino acids into the framework provided by an enzyme with a quite different specificity. The introduced acidic amino acid residues provide a marked pH dependence of the (kcat/Km)FA-A-R-OH/(kcat/Km)FA-A-L-OH ratio. The change in stability upon introduction of Asp/Glu residues can be correlated to the difference in the mean buried surface area between the substituted and the substituting amino acid. Thus, the effects of acidic amino acid residues on the protein stability depend upon whether the introduced amino acid protrudes from the solvent accessible surface as defined by the surrounding residues in the wild type enzyme or is submerged below.     

高速网络协议：问题与答案

作者在本文中指出了吉比特网络的目标及其所带来的问题，采用了提出问题并回答问题（或说明可能答案）的方法来阐明。     

Comfort limits for asymmetric thermal radiation

Groups of 32 and 16 subjects of both sexes were exposed in an environmental chamber to radiant asymmetry caused by a cool wall, a warm wall, and a cool ceiling. Each subject was tested individually while seated and clothed at 0.6 clo. During each 3.5-hour experiment the subject was exposed to six radiant temperature asymmetries. He was asked whether and where he experienced any local cool or warm sensation, and whether it was felt to be uncomfortable. During the entire experiment he was kept thermally neutral by changing the air temperature according to his wishes.For cool walls, warm walls, and cool ceilings curves have been established showing the percentage of dissatisfied subjects as a function of the radiant asymmetry. Radiant asymmetry at a warm wall caused less discomfort than a cool wall. A cool ceiling caused less discomfort than a warm ceiling. Accepting that 5% of the subjects may feel uncomfortable. a radiant temperature asymmetry of 10°C is allowable at a cool wall, 23°C at a warm wall, and 14°C under a cool ceiling. A previous study showed that 4°C is allowable under a warm ceiling. Radiant asymmetry had no significant impact on the operative temperatures preferred by the subjects. No significant differences were observed between the responses of men and women exposed to radiant asymmetry.     

Power management in networked devices

Networks are one of the most significant developments in computing and a hallmark of modern society. However, along with increasing efficiency and productivity, both at home and in the workplace, networks have costs. One cost is the additional energy that electronic devices consume when attached to networks. Power management, a standard feature of modern PCs, was primarily developed to increase battery lifetime in laptop PCs, which historically were not network-connected when using battery power. Today, however, many laptops are connected to a network - typically a Wi-Fi network - as are the majority of desktop computers. Three key drivers of energy use are induced consumption by devices prevented by network connections from entering low-power states, increasing link data rates that inherently consume more energy for the network interfaces, and proliferation of network-connected displays that actively update and display data when no one is present.     

Reduced modified quadratures for quadratic membrane finite elements

Reduced integration is frequently used in evaluating the element stiffness matrix of quadratically interpolated finite elements. Typical examples are the serendipity (Q8) and Lagrangian (Q9) membrane finite elements, for which a reduced 2 × 2 Gauss–Legendre integration rule is frequently used, as opposed to full 3 × 3 Gauss–Legendre integration. This ‘softens’ these element, thereby increasing accuracy, albeit at the introduction of spurious zero energy modes on the element level. This is in general not considered problematic for the ‘hourglass’ mode common to Q8 and Q9 elements, since this spurious mode is non‐communicable. The remaining two zero energy modes occurring in the Q9 element are indeed communicable. However, in topology optimization for instance, conditions may arise where the non‐communicable spurious mode associated with the elements becomes activated. To effectively suppress these modes altogether in elements employing quadratic interpolation fields, two modified quadratures are employed herein. For the Q8 and Q9 membrane elements, the respective rules are a five and an eight point rule. As compared to fully integrated elements, the new rules enhance element accuracy due to the introduction of soft, higher‐order deformation modes. A number of standard test problems reveal that element accuracy remains comparable to that of the under‐integrated counterparts. Copyright © 2004 John Wiley & Sons, Ltd.     

Reflex jaw motions and jaw stiffness pertaining to whiplash injury of the neck

Because a so-called mandibular whiplash injury requires the absence of short-latency jaw-closing reflexes in order to explain the postulated mechanism of injury (excessive jaw opening); the authors studied the presence and absence and more importantly, the kinematics (duration, displacement, velocity, acceleration) of monosynaptic and possibly, polysynaptic myotatic (stretch) reflexes in the jaw elevator muscles. In six healthy adults jaw jerk maneuvers were elicited through a brisk tap on the chin, and surface electromyography identified elevator reflexes while translational electrognathography identified the kinematics of the reflexes. The maneuvers were done while maintaining the rest position (3% MVC) and moderate clenching of the teeth (30% MVC). Electromyography was also used to identify phasic elevator excitations during a passive brisk neck extension maneuver. A sudden and unexpected elongation of the jaw elevators released autogenic reflex responses that, in conjunction with augmented tissue elasticity (stiffness), elevated the mandible into centric occlusion within approximately 150 milliseconds. In 86% of trials, the responses occurred regardless of the prevailing resting and clenching contractile activities. There was no evidence of a depressor force that consistently would and could anchor the mandible in a position of extreme or moderate depression, the theoretical linchpin of the mandibular whiplash injury. It was concluded that the mandibular locomotor system is very efficient in maintaining the rest and intercuspal positions of the mandible. This study found no evidence corroborating the mechanism claimed to release a so-called mandibular whiplash injury.