Effect of Moving Speed of Charged Metallic Spherical Electrode on Electrostatic Discharge

In this investigation, the nature of the electrostatic discharge (ESD) that occurs when a charged object moves toward a stationary grounded object is experimentally clarified. The spark lengths, discharge currents, and induced voltages in a magnetic probe were measured when a charged metallic spherical electrode connected to a 422 pF capacitor approached a stationary grounded object, which was the current target, for different moving speeds of the charged metallic spherical electrode in a range of 1 mm/s to 100 mm/s. The charge voltages of the capacitor were +6.5 kV and +10 kV. Based on the results, the average gap length shortened with the speed of the spherical electrode. The average peak values of the discharge current and the induced voltage were likely to increase with the speed of the spherical electrode. The average rise times of the discharge current and the induced voltage were likely to drop with the speed of the spherical electrode. The relation between the spark length and the discharge current due to the ESD can be explained qualitatively by using an equation derived from the spark resistance formula proposed by Rompe and Weizel.     

Non-axisymmetric buckling behaviour of elastic-plastic circular tubes subjected to a nosing operation

Theoretical investigations have been carried out to predict the non-axisymmetric buckling seen in the throat of circular elastic-plastic tubes subjected to a nosing operation along a frictionless conically shaped die. The buckling points and associated modes are determined by Hill's bifurcation theory in conjunction with a non-axisymmetric buckling mode. The results show that increasing the die semi-angle and the tube thickness or decreasing the material work-hardening rate are always beneficial to improve the buckling limit. The associated critical buckling mode number generally decreases as the tube thickness increases and does not depend drastically on the die semiangle nor on the hardening rate. The effect of the average r value is substantial and the buckling limit is improved when the r value reduces. Part of the present results predict well the results observed in existing experimental work.     

On the Limitation of Net Algorithm for Enumerating Isomeric Structures of Giant Fullerenes

Application of our net algorithm to the generation of all possible IPR isomers for giant fullerenes C_n, n=102 to 120, missed nine out of 39,621 possible structures. Analysis revealed that the omission of too small and too large cap triangles was the reason. Within the range of fullerenes studied, the missed structures are of high-energy and do not affect the distribution of significantly low-energy isomers.     

Characteristics of thermally expanded core fiber

Thermally expanded core (TEC) fiber is expected to reduce fiber-to-fiber and fiber-to-laser diode connection loss. This paper describes the characteristics of TEC fiber theoretically and experimentally. We reveal theoretically that when fabricating TEC fiber the mode field diameter (MFD) is enlarged more effectively by increasing the heating temperature rather than the heating time. In the 1300-1600°C temperature range with heating times between 0 and 60 min, it is necessary to control the temperature accurately so that no deviation from the target temperature is more than ±30°C. This is in order to ensure that any connection loss caused by MFD mismatch is less than 0.1 dB. We show experimentally that the propagation loss of TEC fiber is dependent on the heating region and wavelength by using a micro burner with a propane/oxygen flame. Based on the relationship between the loss characteristics and the expanded MFD, we suggest a method for nondestructively measuring the MFD in TEC fibers     

Abnormal development and differentiation of macrophages and dendritic cells in viable motheaten mutant mice deficient in haematopoietic cell phosphatase

In mice homozygous for the 'viable motheaten' (mev) mutation, numbers of macrophage progenitor cells, particularly monocytes, were markedly increased in the bone marrow and spleen. Increased mobilization of these precursor cells to peripheral tissues and their differentiation to macrophages were evidenced by striking increases in macrophage numbers. Immunohistochemical double staining of tissue sections and flow cytometry analyses of single cell suspensions from these mice demonstrated CD5 (Ly-1)-positive macrophages in the peritoneal cavity, spleen and other tissues. Ly-1-positive macrophage precursor cells were demonstrated in the peritoneal cavity of the mev mice and developed in the omental milky spots. The development of marginal metallophilic and marginal zone macrophages was poor in the splenic white pulp and related macrophage populations were absent in the other lymphoid tissues. The numbers of epidermal Langerhans cells in the skin and T cell-associated dendritic cells in the thymic medulla, lymph nodes, and the other peripheral lymphoid tissues were decreased. However, increased numbers of dendritic cells accumulated in the lungs, liver, and kidneys. These abnormalities in development and differentiation of macrophages and dendritic cells may be ascribed to the deficiency in haematopoietic cell SHP-1 tyrosine phosphatase or may be a secondary consequence of abnormal microenvironments, (either constitutive or in response to inflammatory stimuli) in the haematopoietic and lymphopoietic organs and tissues of these mice.     

Epidermodysplasia verruciformis accompanied by familial large granular lymphocytosis and a decrease in T lymphocytes

A 40-year-old man with epidermodysplasia verruciformis showed a decrease in peripheral blood T cells and abnormal expansion of large granular lymphocytes, accompanied by increased natural killer cell activity. Surface marker analysis of his large granular lymphocytes demonstrated that the subset, CD 57+ and CD 16+, had increased. His father, who had no skin lesions of epidermodysplasia verruciformis, displayed similar blood changes and his brother showed a decrease in T cells and a slight increase in CD 16+ natural killer cells, whereas his mother revealed only a slight decrease in T cells. Our present study indicates that epidermodysplasia verruciformis might be associated with hereditary abnormal expansion of large granular lymphocytes and a decrease in T cells.     

Doubly Bonded C60 Dimers and Congeners: Computational Studies of Structures, Bond Energies and Transformations

Initial steps of thermal transformation from doubly bonded [2+2] (1) and [4+4] (2) dimers of C₆₀ have been analyzed on the basis of computed structural features and Pople's energy partition scheme. Completely conjugated C₁₂₀ structures 3 and 4 are found to be considerably stable and proposed to be important intermediates. The linkage patterns in 3 and 4 are also likely to appear in the repeating units of the metastable dimer and polymer phases of A₁ crystals.     

Hot-carrier effects in scaled MOS devices

A universal guideline and state-of-the-art hot-carrier effects in scaled MOSFETs are reviewed and discussed from the viewpoints of 1) DC and AC hot-carrier effects, 2) hot-carrier detrapping phenomena, 3) mechanical stress effects on hot-carrier phenomena, and 4) hot-carrier resistant device structures.In the deep-submicron region, the hot-carrier applicable voltage is less than 3 V, so AC hot-carrier effects from the dynamic operation of actual circuits should be taken into account. Despite much experimentation and analysis, there is still no universally accepted theory that explain the AC degradation mechanism. This is because the noise caused by the wiring inductance in ULSI circuits and in measurement systems screens the intrinsic AC hot-carrier effects.Here, AC hot-carrier degradation enhanced by gate pulse-induced-noise is analyzed experimentally and theoretically. After eliminating the noise problem, it is found that AC hot-carrier degradation in LDD (Lightly doped drain) and GOLD (gate-drain overlapped device) structures can be estimated based on DC degradation in terms of the effective stress time which takes the duty ratio into account. In addition, it is found that the noise is negligible when the wiring inductance is smaller that 80 nH (250 mω), which is important for future circuit design.Furthermore, hot-carrier detrapping effects, especially in p-channel MOS devices, and hot-carrier phenomena under mechanical stress are investigated experimentally to better understand the underlying hot-carrier physics. Finally, future hot-carrier resistant device structures are discussed.     

Sensorless control of synchronous reluctance motors using on‐line parameter identification method not affected by position estimation accuracy

This paper presents a novel on‐line parameter identification method for sensorless control of Synchronous Reluctance Motors (SynRMs). Although conventional sensorless control methods based on mathematical models usually need some complex measurements of motor parameters in advance, the proposed identification method does not require them and can be realized on‐line. The proposed method identifies motor parameters under sensorless control, so rotor position and velocity cannot be used to identify these parameters. However, the proposed method does not need rotor position and velocity, and identified parameters are not affected by these estimation errors. The sensorless control using identified motor parameters is realized, and the effectiveness of the proposed method is verified by experimental results. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 155(3): 62–69, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20258