Shipper collaboration

The interest in collaborative logistics is fuelled by the ever increasing pressure on companies to operate more efficiently, the realization that suppliers, consumers, and even competitors, can be potential collaborative partners in logistics, and the connectivity provided by the Internet. Logistics exchanges or collaborative logistics networks use the internet as a common computing platform to implement strategies designed to reduce “hidden costs” such as asset reposition costs. Through collaboration shippers may be able to identify and submit tours with little or no asset repositioning to a carrier, as opposed to submitting individual lanes, in return for more favorable rates. In this paper, we focus on finding a set of tours connecting regularly executed truckload shipments so as to minimize asset repositioning. Mathematically, the truckload shipper collaboration problem translates into covering a subset of arcs in a directed Euclidean graph by a minimum cost set of constrained cycles. We formulate the lane covering problem, propose several solution algorithms, and conduct a computational study on the effectiveness of these methodologies.     

Performance of teetered bed separator for non-coal applications

In the present investigation, the effect of the most important process variables, which are teeter water velocity (TW) and pressure set point (SP), on the classification and beneficiation performance of a laboratory-scale teetered bed separator (TBS) was evaluated and discussed. Pure silica sand, magnetite concentrate and their artificial mixture were used to observe the effect of mineral density. Classification test results revealed that separation cut size linearly increases with increasing TW and SP. From the beneficiation studies and the size-by-size chemical analysis of artificial mixture, it can be concluded that significant removal of silica is possible by employing TBS.     

Effects of surface treatments on the shear bond strength of luting cements to zirconia

Objective: The aim of this in vitro study was to evaluate the effect of surface treatments on the shear bond strength of resin cements to zirconia. Material and methods: Sintered zirconia specimens (n = 192) were divided into four different surface treatment groups: control (no treatment); airborne-particle abrasion; glaze layer and hydrofluoric acid (HF) application, and hot etching solution application. Then, each group was divided into four subgroups (n = 12), and three different resin cements were applied to the zirconia surfaces. The shear bond strength value of each specimen was measured after 5000 thermo cycles. The failure types were examined with a stereomicroscope and the effects of the surface treatments were evaluated with a scanning electron microscope. Results were analyzed using analysis of variance and Tukey’s post hoc tests (α = 0.05). Results: The surface treatment and resin cement type significantly affected the bond strength results (p < 0.05). For all resin cements, the airborne-particle abrasion treatment increased the shear bond strength values (p < 0.05). The glaze layer & HF application increased shear bond strength values for all groups, except the Single Bond Universal-RelyX Unicem Aplicap group (p < 0.05). The surface roughness values of airborne-particle abraded specimens were similar to comparable values for specimens from the control group and the hot etching solution group (p > 0.05). The glaze layer & HF application group produced the highest surface roughness values (p < 0.05). Conclusion: The results of this study recommend using the appropriate combination of surface treatment and adhesive/silane coupling agent to achieve durable zirconia-resin bonding.     

An Automated Monitoring System for an Experimental Coal Gasifier

ABSTRACT

A data acquisition system has been developed for the analysis of the performance of an experimental reactor unit for coal gasification. Pertinent data such as gas concentrations, temperatures, and pressures at several locations inside the reactor, and the flow rate of supply gases are collected. An automated calibration procedure of the gas analysis system is included. A minicomputer controls the time sequences of the individual events, allowing a high degree of flexibility. The intervals between two gas analyses can be made as short as 30 sec, the other data can be taken arbitrarily often. The system is suitable for expansion to monitor more physical quantities and to increase the number of observation points inside the reactor.     

Capacitive micromachined ultrasonic transducers: next-generation arrays for acoustic imaging?

Piezoelectric materials have dominated the ultrasonic transducer technology. Recently, capacitive micromachined ultrasonic transducers (CMUTs) have emerged as an alternative technology offering advantages such as wide bandwidth, ease of fabricating large arrays, and potential for integration with electronics. The aim of this paper is to demonstrate the viability of CMUTs for ultrasound imaging. We present the first pulse-echo phased array B-scan sector images using a 128-element, one-dimensional (1-D) linear CMUT array. We fabricated 64- and 128-element 1-D CMUT arrays with 100% yield and uniform element response across the arrays. These arrays have been operated in immersion with no failure or degradation in performance over the time. For imaging experiments, we built a resolution test phantom roughly mimicking the attenuation properties of soft tissue. We used a PC-based experimental system, including custom-designed electronic circuits to acquire the complete set of 128 x 128 RF A-scans from all transmit-receive element combinations. We obtained the pulse-echo frequency response by analyzing the echo signals from wire targets. These echo signals presented an 80% fractional bandwidth around 3 MHz, including the effect of attenuation in the propagating medium. We reconstructed the B-scan images with a sector angle of 90 degrees and an image depth of 210 mm through offline processing by using RF beamforming and synthetic phased array approaches. The measured 6-dB lateral and axial resolutions at 135 mm depth were 0.0144 radians and 0.3 mm, respectively. The electronic noise floor of the image was more than 50 dB below the maximum mainlobe magnitude. We also performed preliminary investigations on the effects of crosstalk among array elements on the image quality. In the near field, some artifacts were observable extending out from the array to a depth of 2 cm. A tail also was observed in the point spread function (PSF) in the axial direction, indicating the existence of crosstalk. The relative amplitude of this tail with respect to the mainlobe was less than -20 dB.     

Robust multi bit and high quality audio watermarking using pseudo-random sequences

A robust multi bit and high quality audio watermarking technique in time domain is proposed in this paper. Watermarking is a technique used to label digital media by hiding copyright or other information into the underlying data. The watermark must be imperceptible and undetectable by the user and should be robust to various types of distortion. To enhance the robustness and taper-resistance of the embedded watermark, in this paper a multi bit technique is employed. Instead of embedding one bit into an audio frame, multiple bits can be embedded into each audio sub-frame. For attackers, since they do not know the parameters, this significantly reduces the possibility of unauthorized bit detection and removal of watermark. In real-time watermarking applications, robustness is not the only factor that plays an important role. The other factor that plays a very an important role is computational complexity. In general, audio file is transmitted in compressed form. Real-time watermark embedding must take into account this compressed form, because first decompressing the data, adding a watermark and then recompressing the data is computationally too demanding. In this paper, we propose robust and low complexity audio watermarking algorithm. To evaluate the performance of the proposed audio watermarking algorithm, subjective and objective quality tests including bit error rate (BER) and signal-to-noise ratio (SNR) were conducted. Compared to traditional one bit embedding algorithm, the proposed algorithm gives highly recovery rate after attack by commonly used audio data manipulations, such as low pass filtering, requantization, resampling, and MP3 compression.     

Volumetric ultrasound imaging using 2-D CMUT arrays

Recently, capacitive micromachined ultrasonic transducers (CMUTs) have emerged as a candidate to overcome the difficulties in the realization of 2-D arrays for real-time 3-D imaging. In this paper, we present the first volumetric images obtained using a 2-D CMUT array. We have fabricated a 128 x 128-element 2-D CMUT array with through-wafer via interconnects and a 420-microm element pitch. As an experimental prototype, a 32 x 64-element portion of the 128 x 128-element array was diced and flip-chip bonded onto a glass fanout chip. This chip provides individual leads from a central 16 x 16-element portion of the array to surrounding bondpads. An 8 x 16-element portion of the array was used in the experiments along with a 128-channel data acquisition system. For imaging phantoms, we used a 2.37-mm diameter steel sphere located 10 mm from the array center and two 12-mm-thick Plexiglas plates located 20 mm and 60 mm from the array. A 4 x 4 group of elements in the middle of the 8 x 16-element array was used in transmit, and the remaining elements were used to receive the echo signals. The echo signal obtained from the spherical target presented a frequency spectrum centered at 4.37 MHz with a 100% fractional bandwidth, whereas the frequency spectrum for the echo signal from the parallel plate phantom was centered at 3.44 MHz with a 91% fractional bandwidth. The images were reconstructed by using RF beamforming and synthetic phased array approaches and visualized by surface rendering and multiplanar slicing techniques. The image of the spherical target has been used to approximate the point spread function of the system and is compared with theoretical expectations. This study experimentally demonstrates that 2-D CMUT arrays can be fabricated with high yield using silicon IC-fabrication processes, individual electrical connections can be provided using through-wafer vias, and flip-chip bonding can be used to integrate these dense 2-D arrays with electronic circuits for practical 3-D imaging applications.     

Phase/State Transitions of Confectionery Sweeteners: Thermodynamic and Kinetic Aspects

Abstract: It has been said that the key to making high‐quality candy is understanding and controlling the transitions of sugar. Whether found as crystal, glass, or fluid solution, sugars impart the texture necessary to distinguish one confection from another and to provide a unique experience to the consumer. In principle, the phase/state transitions of sugars are best understood through careful application of the phase diagram. However, many, if not all, confections are not at equilibrium, meaning that the phase diagram is simply a starting point for understanding and controlling the state of sugars. An understanding of the thermodynamic driving forces that push a confection towards equilibrium and the kinetic constraints that control the rate of approaching that equilibrium are key elements to creating products with the desired texture, quality, and shelf life. In this review, we summarize the thermodynamic and kinetic aspects of controlling phase/state transitions in sweeteners, with particular emphasis on applications to confectionery products.