Effect of dispersion states (electrostatic/electrosteric stabilization) on particles arrangement in the yttria-stabilized zirconia sediments

In the present work, particle arrangement and their packing in the sediment layer of zirconia suspension were studied. To evaluate the particle settling, aqueous suspensions of zirconia nanoparticles were prepared in different dispersion states. In one state, Dolapix CE64 was used as a dispersant to provide electrosteric mechanism. In another state, pH of the suspension was adjusted at 4 to provide electrostatic mechanism. The other state was the combination of dispersant and pH adjustment which resulted in the most stable suspension. First of all, the stability of all dispersion states was evaluated by zeta potential, sediment volume (SV) and height, viscosity, and packing density (PD). Then, the sediment layers of all suspensions were characterized. Incorporation of electrostatic mechanism was resulted in a main decrease in viscosity with high surface charges, while electrosteric mechanism caused lower sedimentation of particles. Fall velocities of particles/agglomerates were estimated, and the influences of dispersion states on the particles fall velocities were characterized. The microstructural observation revealed homogeneous packing of particles in the sediment layer of the stable suspension demonstrating the proper dispersion of particles. Dolapix CE64 and pH adjustment resulted in a uniform arrangement of particles without agglomeration and spherical and regular granules with a uniform shape.     

Fundamental parameters affecting electrospinning of PAN nanofibers as uniaxially aligned fibers

Electrospinning with a collector consisting of two pieces of electrically conductive substrates separated by a gap has been used to prepare uniaxially aligned PAN nanofibers. Solution of 15 wt % of PAN/DMF was used tentatively for electrospinning. The effects of width of the gap and applied voltage on degree of alignment were investigated using image‐processing technique by Fourier power spectrum method. The electrospinning conditions that gave the best alignment of nanofibers for 10–15 wt % solution concentrations were experimentally obtained. Bundles like multifilament yarns of uniaxially aligned nanofibers were prepared using a new simple method. After‐treatments of these bundles were carried out in boiling water under tension. A comparison was made between the crystallinity and mechanical behavior of posttreated and untreated bundles. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 4350–4357, 2006     

A greedy MLPG method for identifying a control parameter in 2D parabolic PDEs

In this paper, we consider coefficient inverse problems, which are associated with the identification of unknown time dependent control parameter and unknown solution of two-dimensional parabolic inverse problem with overspecialization at a point in the spatial domain. After suitable finite difference approximation of time variable, an MLPG method is used for spatial discretization. To improve the efficiency of the MLPG method, a greedy algorithm is used. In fact, using the greedy algorithm, we avoid using more points from the data site than absolutely necessary and therefore, the method becomes more efficient. Comparison of the different kind of point selection and the effect of noisy data are performed for four test problems while our last test problem considers a problem with unknown solution. The results reveal that the method is efficient.     

Homotopy perturbation method for motion of a spherical solid particle in plane couette fluid flow

He’s homotopy perturbation method is applied to obtain exact analytical solutions for the motion of a spherical particle in a plane couette flow. It is demonstrated that the applied analytical method is very straightforward in comparison with existing techniques. Furthermore, it is decidedly effectual in terms of accuracy and rapid convergence. The formulation of the problem is presented in the text as well as the analytical and numerical procedures. The current results can be used in different areas of particulate flows.     

Modeling the hollow cylindrical piezo-ceramics with axial polarization using equivalent electro-mechanical admittance matrix

Modeling a piezo-ceramics as an electro-mechanical element is usually done using the laws of electricity. Due to complexity of the derived circuits, this kind of modeling usually results in some simplifications. In this paper using the force–velocity boundary conditions and equalizing the mechanical elements to the electrical ones, the governing equations of a hollow cylindrical piezo-ceramics with axial polarization are solved. Then the equivalent electro-mechanical impedance is represented via matrix notation. Using the matrix algebra the resonance and anti-resonance frequencies are calculated and then compared to the experimental results. The proposed method does not need to any simplification in circuit analysis, and provides the capability of modeling the various layers of piezo-ceramics and metals together in electro-acoustical transducers.     

An optical solution to the 3-SAT problem using wavelength based selectors

In this paper, an optical wavelength-based method to solve a well-known NP-complete problem 3-SAT is provided. In the 3-SAT problem, a formula F in the form of conjunction of some clauses over Boolean variables is given and the question is to find if F is satisfiable or not. The provided method uses exponential number of different wavelengths in a light ray and considers each group of wavelengths as a possible value-assignment for the variables. It then uses optical devices to drop wavelengths not satisfying F from the light ray. At the end, remaining wavelengths indicate satisfiability of the formula. The method provides two ways to arrange the optical devices to select satisfying wavelengths for a given clause: simple clause selectors and combined clause selectors, both requiring exponential preprocessing time. After preprocessing phase, the provided method requires polynomial time and optical devices to solve each problem instance.