Electrochemical characterization of a Porphyridium cruentum-modified carbon paste electrode by cyclic voltammetry

A carbon paste electrode was modified with red algal specie of Porphyridium cruentum and then characterization of its electrocatalytic activity was demonstrated with cyclic voltammetric studies of potassium ferricyanide (K₃[Fe(CN)₆]) system. Stable and fast response of modified electrode to redox couple of [Fe(CN)₆]^3?/[Fe(CN)₆]^4? was highlighted by performing experiments in comparison to bare carbon paste electrode. Fourier transform infrared spectra revealed the functional moieties of bare and modified electrode. Electrochemical surface area and surface coverage capacity were calculated for both electrodes. The effect of scan rate helped evaluate the nature of electrode process, electron transfer mechanism, and kinetic parameters (rate constant, charge transfer coefficient).     

Removal of bisphenol A and 17α-ethinyl estradiol from landfill leachate using single-walled carbon nanotubes

In this study, the adsorption of bisphenol A (BPA) and 17α-ethinyl estradiol (EE2) from landfill leachate onto single-walled carbon nanotubes (SWCNTs) was investigated. Different leachate solutions were prepared by altering the pH, ionic strength, and dissolved organic carbon (DOC) in the solutions to mimic the varying water conditions that occur in leachate during the various stages of waste decomposition. The youngest and oldest leachate solutions contained varying DOC and background chemistry and were represented by leachate Type A (pH = 5.0; DOC = 2500 mg/L; conductivity = 12,500 μS/cm; [Ca²⁺] = 1200 mg/L; [Mg²⁺] = 470 mg/L) and Type E (pH = 7.5; DOC = 250 mg/L; conductivity = 3250 μS/cm; [Ca²⁺] = 60 mg/L; [Mg²⁺] = 180 mg/L). These solutions were subsequently combined in different ratios to produce intermediate solutions, labeled B-D, to replicate time-dependent changes in leachate composition. Overall, a larger fraction of EE2 was removed as compared to BPA, consistent with its higher log K_OW value. The total removal of BPA and EE2 decreased in older leachate solutions, with the adsorptive capacity of SWCNTs decreasing in the order of leachate Type A > Type B > Type C > Type D > Type E. An increase in the pH from 3.5 to 11 decreased the adsorption of BPA by 22% in young leachate and by 10% in old leachate. The changes in pH did not affect the adsorption of EE2 in the young leachate, but did reduce adsorption by 32% in the old leachate. Adjusting the ionic strength using Na⁺ did not significantly impact adsorption, while increasing the concentration of Ca²⁺ resulted in a 12% increase in the adsorption of BPA and a 19% increase in the adsorption of EE2. DOC was revealed to be the most influential parameter in this study. In the presence of hydrophilic DOC, represented by glucose in this study, adsorption of the endocrine disrupting compounds (EDCs) onto the SWCNTs was not affected. In the absence of SWCNTs, hydrophobic DOC (i.e., humic acid) adsorbed 15-20% of BPA and EE2. However, when the humic acid and SWCNTs were both present, the overall adsorptive capacity of the SWCNTs was reduced. Hydrophobic (π-π electron donor-acceptor) interactions between the EDCs and the constituents in the leachate, as well as interactions between the SWCNTs and the EDCs, are proposed as potential adsorption mechanisms for BPA and EE2 onto SWCNTs.     

MIMO iterative receiver SNR estimation strategies for link to system interfacing

This paper presents link to system (L2S) interfacing technique for multiple input and multiple output (MIMO) iterative receivers. In L2S interfacing, usually the post detection signal to noise ratio (SNR)‐based frame error rate lookup tables (LUT) are used to predict the link level performance of receivers. While L2S interfacing for linear MIMO receivers can be conveniently implemented, it is more challenging for MIMO iterative receivers due to unavailability of the closed form SNR expressions. In this paper, we propose three methods for post detection SNR estimation for MIMO iterative receivers. The first is based on the QR decomposition of the channel matrix, the second relies on the residual noise calculation based on the soft symbols, and the third exploits the closed form SNR expressions for linear receivers. A link to system interface model for iterative receivers is developed for evaluating the reference curves for different modulation and coding schemes, and results are validated by comparing the simulated and predicted frame error rates. It is shown that linear and residual noise‐based SNR approximations result in a very good prediction performance whereas the performance of QR decomposition‐based method degrades for higher order modulations and coding schemes. This paper presents link to system interfacing technique for MIMO iterative receivers. A link to system interface model for iterative receivers is developed for evaluating the reference curves for different modulation and coding schemes, and results are validated by comparing the simulated and predicted frame error rates. Three post detection SNR evaluation schemes have been proposed for link to system interfacing all of which give good prediction performance especially at lower order modulation.     

Personalized saliency prediction using color spaces

Saliency is the ability of being important, noticeable or attention worthy. Finding salient regions in images has important applications in automatic image cropping, image compression and advertisements. The salient regions for an individual in an image changes according to their gender, race, culture, likes, dislikes and experiences. Universal Saliency Maps point out the overall general salient regions without any considerations of personal traits of the subject. Therefore, personalized saliency maps are required for better and more personalized predictions of salient regions. In this study, using the RGB (Red, Green, Blue), CYMK (Cyan, Yellow, Magenta, Key), HSV (Hue, Saturation, Value) and HSL (Hue, Saturation, Lightness) fixation patterns of individuals, we propose a Gradient Boosted Tree Regression model to extract personalized saliency map from the universal saliency map with an average accuracy of 80% (Area Under Curve Judd Metrics). We also put forth our discussion for why some images and subjects have better saliency map predictions than others.

     

Effect of various surface preparation techniques on the delamination properties of vacuum infused Carbon fiber reinforced aluminum laminates (CARALL): Experimentation and numerical simulation

Carbon fiber reinforced aluminum laminates (CARALL) are one of the aluminum based Fiber metal laminates (FMLs) which, due to their high strength to weight ratio and good impact resistance are greatly replacing aluminum alloys in aircraft structures. In this research work, interlaminate shear strength of Vacuum assisted resin transfer molding (VARTM) manufactured CARALL has been investigated. Numerical simulation model incorporated with real time material data has been developed to predict the delamination behavior of CARALL laminates. Standard CARALL specimens with different surface morphologies were prepared by electric discharge machining, mechanical, chemical and electrochemical surface treatments. T-peel tests were carried out according to standard ASTM D1876-08 to find out inter laminate shear strength. FMLs made out of mechanically, chemically and electrochemically cleaned metal sheets depicted high interlaminate shear strength. SEM micrographs of failed surfaces verify the high adhesive strength of epoxy. Developed numerical simulation model accurately predicts the delamination behavior of CARALL as observed during experimentation.     

Green Adeptness in the Synthesis and Stabilization of Copper Nanoparticles: Catalytic,Antibacterial, Cytotoxicity,and Antioxidant Activities

Copper nanoparticles (CuNPs) are of great interest due to their extraordinary properties such as high surface-to-volume ratio, high yield strength, ductility, hardness, flexibility, and rigidity. CuNPs show catalytic, antibacterial, antioxidant, and antifungal activities along with cytotoxicity and anticancer properties in many different applications. Many physical and chemical methods have been used to synthesize nanoparticles including laser ablation, microwave-assisted process, sol-gel, co-precipitation, pulsed wire discharge, vacuum vapor deposition, high-energy irradiation, lithography, mechanical milling, photochemical reduction, electrochemistry, electrospray synthesis, hydrothermal reaction, microemulsion, and chemical reduction. Phytosynthesis of nanoparticles has been suggested as a valuable alternative to physical and chemical methods due to low cytotoxicity, economic prospects, environment-friendly, enhanced biocompatibility, and high antioxidant and antimicrobial activities. The review explains characterization techniques, their main role, limitations, and sensitivity used in the preparation of CuNPs. An overview of techniques used in the synthesis of CuNPs, synthesis procedure, reaction parameters which affect the properties of synthesized CuNPs, and a screening analysis which is used to identify phytochemicals in different plants is presented from the recent published literature which has been reviewed and summarized. Hypothetical mechanisms of reduction of the copper ion by quercetin, stabilization of copper nanoparticles by santin, antimicrobial activity, and reduction of 4-nitrophenol with diagrammatic illustrations are given. The main purpose of this review was to summarize the data of plants used for the synthesis of CuNPs and open a new pathway for researchers to investigate those plants which have not been used in the past.

Open image in new window

Graphical abstract Proposed Mechanism for Antibacterial activity of copper nanoparticles.

     

Influence of Amphiphilic Plasticizer on Properties of Thermoplastic Starch Films

Thermoplastic starch powders and films were produced by using different combinations of hydrophilic (malic acid and water) and amphiphilic (isoleucine and butyric acid) plasticizers. Spray drying was used to produce thermoplastic starch powder followed by compression molding for the development of films. In all plasticized formulations, the rate of retrogradation was inhibited until the seventh day. The crystallinity and moisture sensitivity of the freshly prepared films were dependent on amphiphilic plasticizer quantity in formulation. Fourier transform infrared spectroscopy and thermogravimetric analysis showed an effective interaction of starch with isoleucine. Isoleucine formulated films showed the highest tensile strength, whereas malic acid-rich films showed better strain values.