The electrical and dielectric characterization of the Co/ZnO-Rods/p-Si heterostructure depending on the frequency

Journal of Materials Science: Materials in Electronics - Zinc oxide (ZnO) rods film was fabricated by homemade and simple spray pyrolysis technique on a p-type silicon (Si) substrate, and the film...     

Prioritization methodology of dangerous substances for water quality monitoring with scarce data

Monitoring and control of dangerous substances discharged into receiving waters have attracted more attention lately. Since it is not possible to analyze every single substance, a prioritization methodology is needed for the selection of those to be monitored. Existing well-developed models require significant amount of data for reliable outcomes. This paper presents a methodology to prioritize the dangerous substances having adverse effects on freshwaters in Turkey, where data are scarce. Such a methodology will also serve as a solid model for other countries with limited background data. The adopted methodology enabled the elimination of chemicals to generate a candidate list composed of 608 substances among more than 5000 substances. Further screening and prioritization were conducted using different assessment methods (i.e., Total Hazard Value, Total Impact Value, Combined Monitoring-based, and Modelling-based Priority Setting) to obtain a proposed Final Candidate Specific Pollutants List of 150 dangerous substances. The proposed Candidate National Pollutant List of Turkey was established by combining 45 priority pollutants of the European Union with a list of candidate specific pollutants. According to the outcomes of this study, monitoring and controlling of 195 dangerous substances in freshwaters are recommended. Further detailed studies should be conducted in order to observe the actual levels of these dangerous substances in freshwaters followed by a review of the monitoring list accordingly. Moreover, further revisions might be required in the proposed list due to some possible versatile conditions in terms of sampling points (i.e., change in the location of industries).     

An eco-friendly process: Predictive modelling of copper adsorption from aqueous solution on Spirulina platensis

The adsorption of copper ions on Spirulina platensis was studied as a function of contact time, initial metal ion concentration, and initial pH regimes. Characterization of this adsorbent was confirmed by FTIR spectrum. Modified Gompertz and Logistic models have not been previously applied for the adsorption of copper. Logistic was the best model to describe experimental kinetic data. This adsorption could be explained by the intra-particle diffusion, which was composed of more than one sorption processes. Langmuir, Freundlich, and Redlich–Peterson were fitted to equilibrium data models. According to values of error functions and correlation coefficient, the Langmuir and Redlich–Peterson models were more appropriate to describe the adsorption of copper ions on S. platensis. The monolayer maximum adsorption capacity of copper ions was determined as 67.93 mg g^?1. Results indicated that this adsorbent had a great potential for removing of copper as an eco-friendly process.     

Synthesis of novel acrylic modified water reducible alkyd resin: Investigation of acrylic copolymer ratio effect on film properties and thermal behaviors

New four‐component water reducible acrylic modified alkyd resins that are based on 1,3‐propanediol and contain different ratios of acrylic copolymer (AC) were synthesized by using a novel four‐stage fatty acid method. The final content of solids in the water reducible acrylic modified alkyd resins was 60% by weight. After the modified alkyd resin films were cured at 150°C for 1 h, it was observed that the use of AC as the modifier component had improved their physical and chemical surface coating properties and thermal behaviors. Experimental results show that the optimum AC ratio is 40% of the equivalent amount of AC to alkyd resin. Low‐volatile organic compounds (VOC) content water reducible acrylic modified alkyd resins yielded soft and flexible films with high chemical/thermal resistance, suitable for manufacturing of surface coating binders. POLYM. ENG. SCI., 56:947–954, 2016. © 2016 Society of Plastics Engineers     

Bond strength and adaptation of pulp capping materials to dentin

This study evaluated the shear bond strength (SBS) and internal marginal adaptation of pulp‐capping materials to dentin. Flat occlusal deep dentin surfaces were produced and randomly assigned to two groups (sound or artificial caries‐affected dentin). The specimens in each group were assigned to one of seven subgroups according to the materials used: Biodentine, Theracal LC, Ultra‐Blend plus, Calcimol LC, ApaCal ART, EQUIA Forte, and Ionoseal. Buildups (3‐mm inner diameter and 2‐mm deep) were made over the dentin surfaces. The bonded specimens were tested under shear forces at a crosshead speed of 0.8 mm/min and fracture modes were determined using a stereomicroscope at 25× magnification. The materials were applied to the pulp floor of prepared Class I cavities and then the cavities were restored with composite resin. Restored molar teeth were subjected to 5,000 thermocycles and sectioned in a bucco–lingual direction. Resin replicas were made to determine the adaptation at the pulp floor with scanning electron microscopy. Significant differences were determined among both bond strengths and gap formations of the materials. EQUIA Forte applied to both dentin substrates had a significantly higher SBS than the other materials. The bond strength of each material was not influenced by the dentin condition. Biodentine (3.03%), EQUIA Forte (7.83%), and Theracal LC (13.37%) had lower gap formations compared to other materials but were not significantly different from each other.     

Exergetic performance analysis of ohmic cooking process

This paper deals with the performance evaluation of ohmic cooking process by applying exergy analysis. Cylindrically shaped ground beef samples with different fat contents (2%, 9% and 15%) were used as the test material being cooked. The cooking process was conducted at three different voltage gradients (20, 30 or 40 V/cm) up to 80 °C. The effects of voltage gradient applied and the initial fat content of sample on the energy efficiency, exergy efficiency, exergy loss and improvement potential were investigated. The energy and exergy efficiency values for ohmic cooking process at the voltage gradients between 20 and 40 V/cm were found to be in the range of 0.69–0.91% and 63.2–89.2%, respectively. It was determined that the system should have been improved energetically especially for samples having high initial fat contents cooked at the low voltage gradients, since improvement potential values predicted were highest at this conditions.