Effect of enzymatic hydrolysis of proteins on growth of Bifidobacterium bifidus in milk

The effect of enzymatic hydrolysis of proteins in milk using neutrase on the growth of the probiotic strain Bifidobacterium bifidus was evaluated by estimation of microbial growth, acidity, viscosity and flavour production. A significant increase in the growth of B bifidus was observed in neutrase‐hydrolysed milk. The setting time of bifidus‐cultured milk was advanced by about 12 h at 5% degree of hydrolysis. Enzymatic hydrolysis of proteins prior to cultivation also significantly increased the viscosity of the product. An approximately 60% increase in viscosity of the product was observed in neutrase‐hydrolysed milk. Production of steam‐volatile monocarbonyls as an indication of development of flavour was also higher in neutrase‐hydrolysed milk. The concentration of steam‐volatile monocarbonyls was 2.47 µmol per 100 ml in neutrase‐hydrolysed milk but only 1.84 µmol per 100 ml in control milk at the setting point of the curd. © 2002 Society of Chemical Industry     

Modeling the growth of Indian and Chinese liquid crystals literature as reflected in Science Citation Index (1997–2006)

The present paper describes the application of growth models as suggested by Egghe and Ravichadra Rao (Scientometrics 25:5–46, 1992). The scope of the paper is limited to study the growth and dynamics of Indian and Chinese publications in the field of liquid crystals research (1997–2006).     

Implementation of energy-efficient windows in Swedish single-family houses

A questionnaire survey of 1010 homeowners in Jämtland and Västernorrland, which are two counties in central Sweden, was conducted to understand the factors influencing their decision to install energy-efficient windows. We complemented this survey with an interview of 12 window sellers/installers in the county Jämtland. The annual energy cost reduction, age, and condition of the windows were the most important reasons for the window replacement decision. Approximately 80% of the respondents replaced their windows with energy-efficient windows with U-value of 1.2 W/m² K. Condensation problems, perceived higher prices, and lack of awareness about windows with lower U-values were important reasons for non-adoption of more energy-efficient windows. Window sellers/installers have a strong influence on homeowners’ window selection that was indicated by the 97% of homeowners who bought the windows that were recommended to them. Sellers/installers revealed that they did not recommend windows with U-value of less than 1.2 W/m² K because they thought that investing in such windows was not economical and because windows with U-value less than 1.2 W/m² K could cause water condensation on the external surface of window pane.     

Non-catalytic facile synthesis of superhard phase of boron carbide (B13C2) nanoflakes and nanoparticles

Boron Carbide is one the hardest and lightest material that is also relatively easier to synthesis as compared to other superhard ceramics like cubic boron nitride and diamond. However, the brittle nature of monolithic advanced ceramics material hinders its use in various engineering applications. Thus, strategies that can toughen the material are of fundamental and technological importance. One approach is to use nanostructure materials as building blocks, and organize them into a complex hierarchical structure, which could potentially enhance its mechanical properties to exceed that of the monolithic form. In this paper, we demonstrated a simple approach to synthesize one- and two-dimension nanostructure boron carbide by simply changing the mixing ratio of the initial compound to influence the saturation condition of the process at a relatively low temperature of 1500 degrees C with no catalyst involved in the growing process. Characterization of the resulting nano-structures shows B13C2, which is a superhard phase of boron carbide as its hardness is almost twice as hard as the commonly known B4C. Using ab-initio density functional theory study on the elastic properties of both B12C3 and B13C2, the high hardness of B13C2 is consistent to our calculation results, where bulk modulus of B13C2 is higher than that of B4C. High resolution transmission electron microscopy of the nanoflakes also reveals high density of twinning defects which could potentially inhibit the crack propagation, leading to toughening of the materials.     

Application of Artificial Neural Networks for Evaluating Pressure Filtration of Coal Refuse Slurries

Bench-scale pressure filtration testing was performed to evaluate the dewatering characteristics of two coal refuse slurries, which were collected from thickener underflow streams of two coal preparation plants. Pressure filtration provides an opportunity to produce drier solids (filter cake) that can be stacked or mixed with the coarse refuse and improved water (filtrate) recovery that can be reused in the plant. This paper examines the effects of some of the major influencing variables such as pressure, slurry pH, feed solids concentration, fines fraction of solids in the slurry, filtration time, and temperature on dewatering thickener underflow slurry. Experimental results indicated that the overall filtrate flux increased with increase in pressure and temperature while it decreased with increase in fines fraction, pH, filtration time, and solids concentration. A total of 82 experimental results were used to develop a feed forward back-propagating artificial neural network (ANN) model. The model had R² values over 0.9 for both the training and the testing datasets, indicating the goodness of fit. Sensitivity analysis performed using the ANN model indicated that filtration time and pH were the most significant variables influencing filtrate flux.     

Co-production of Lactic Acid and <Emphasis Type="Italic">Lactobacillus rhamnosus</Emphasis> Cells from Whey Permeate with Nutrient Supplements

Lactic acid and cell production from whey permeate by Lactobacillus rhamnosus with different nutrient supplements were investigated in this study. Yeast extract was identified as the most effective nutrient affecting lactic acid production. Increase in inoculum size from 0.05% to 1% (v/v) resulted in a substantial increase in lactic acid productivity from 0.66 to 0.83 g L⁻¹ h⁻¹ (P < 0.001). The optimal temperature for lactic acid production was 37 °C, while the highest cell production was obtained at 42 °C. When whey permeate and yeast extract concentrations were 6.8% (w/v) and 3 g L⁻¹, respectively, lactic acid productivity reached 0.85 g L⁻¹ h⁻¹ after 48-h cultivation, which is 3.40 times of those without nutrient supplements.     

Optimization of EBSD parameters for ultra-fast characterization

Ultra-fast pattern acquisition of electron backscatter diffraction and offline indexing could become a dominant technique over online electron backscatter diffraction to investigate the microstructures of a wide range of materials, especially for in situ experiments or very large scans. However, less attention has been paid to optimize the parameters related to ultra-fast electron backscatter diffraction. The present results show that contamination on a clean and unmounted specimen is not a problem even at step sizes as small as 1 nm at a vacuum degree of 6.1 × 10(-5) Pa. There exists an optimum step size at about 50 data acquisition board units. A new and easy method to calculate the effective spatial resolution is proposed. Effective spatial resolution tends to increase slightly as the probe current increases from 10 to 100 nA. The fraction of indexed points decreases slightly as the frame rate increases from 128 patterns per second (pps) to 835 pps by compensating the probe current at the same ratio. The value 96 × 96 is found to be the optimum pattern resolution to obtain optimum speed and image quality. For a fixed position of electron backscatter diffraction detector, the fraction of indexed points as a function of working distance has a maximum value and drops sharply by shortening the working distance and it decreases slowly with increasing the working distance.     

Factors influencing energy efficiency investments in existing Swedish residential buildings

We used the data from a survey conducted in 2008 of 3,000 owners of detached houses to analyse the factors that influence the adoption of investment measures to improve the energy efficiency of their buildings. For the majority of Swedish homeowners, it was important to reduce their household energy use, and most of them undertook no-cost measures as compared to investment measures. Personal attributes such as income, education, age and contextual factors, including age of the house, thermal discomfort, past investment, and perceived energy cost, influence homeowners’ preference for a particular type of energy efficiency measure. The implications for promoting the implementation of energy efficiency investment measures are discussed.     

Swedish energy advisers' perceptions regarding and suggestions for fulfilling homeowner expectations

Municipality energy advice services were re-introduced in Sweden in 1998 as a way of advising end-users, mainly owners of detached houses, on energy issues. In this paper, we investigate Swedish energy advisers' perceptions of homeowners' awareness of the energy advice service and their perceived ability to fulfil homeowners' expectations. Our study is based on a mail-in questionnaire survey conducted in 2009 and distributed to municipality energy advisers in all municipalities in Sweden. About 66% of the energy advisers responded. The results show that 43% of the energy advisers thought that fewer than 50% of the homeowners were aware of the service and that mass media advertisements and presentations at different organisations could improve homeowner awareness. Energy adviser attitudes, job satisfaction, and the perception that the advisers possessed up-to-date and good knowledge and sufficient financial resources to execute their duties had a significant influence on their perceived ability to fulfil homeowner expectations. Increased training in technical aspects of energy measures and increased financial support were the two measures most widely suggested as a means to improve energy advisers' performance.