品种和加工方式对双低菜粕有效能和氨基酸有效性的影响_注

用精确饲喂技术评价了 3个品种的中国双低油菜和 1个加拿大卡诺拉的脱脂种籽和商品饼粕的能量和氨基酸的有效性。结果表明 ,4个脱脂种籽的氮校正真代谢能和氨基酸真消化率没有差异 (P >0 .0 5 ) ;而 4个商品饼粕的脱脂样品的氮校正真代谢能和氨基酸真消化率有极显著或显著差异。研究结果证实 ,不适当的加工方式不仅降低了氨基酸的有效性 ,而且影响家禽对能量的利用效率。     

Thermal conductivity of 4He vapor as a function of density

Measurements of the dependence of the thermal conductivity (T, ) of ⁴He vapor on the density are presented at 3.3 and 4.5 K. The initial dependence upon near = 0 agrees with the prediction of the modified Enskog theory; but at higher densities there are departures from the prediction. The excess thermal conductivity (T, ) – (T, 0) is independent of T within experimental error.     

Ball screw drives with enhanced bandwidth by modification of the axial bearing

The bandwidth of the ball-screw drive is limited by the first natural frequency of the mechanical structure. As opposed to conventional drives where the axial bearing stiffness is kept high to obtain higher natural frequencies, this paper proposes to use lower axial bearing stiffness accompanied by a strong damper in parallel with the ball-screw structure. The proposed method, which is experimentally demonstrated, increases the bandwidth of the drive considerably provided that a cost effective and practical damper is available.     

Biosynthesis of inositol phosphoceramides and remodeling of glycosylphosphatidylinositol anchors in Saccharomyces cerevisiae are mediated by different enzymes

Metabolic labeling of cells with [3H]dihydrosphingosine ([3H]DHS) allows us to follow the incorporation of this tracer into ceramides (Cer), inositol phosphoceramides (IPCs), and mannosylated IPCs and at the same time to assess the remodeling of glycosylphosphatidylinositol proteins during which preexisting anchor lipid moieties are replaced by [3H]Cer-containing anchors. The results indicate that the remodelases in the endoplasmic reticulum and Golgi use as their substrate Cers that are not generated by the breakdown of IPCs but are newly synthesized. Aureobasidin A, an inhibitor of the IPC synthase Aur1p completely blocks IPC biosynthesis at 0.5 micrograms/ml but does not block remodeling of glycosylphosphatidylinositol anchors even at concentrations up to 10 micrograms/ml. In addition, a synthetic Cer analogue, N-hexanoyl-[3H]DHS, is used as a substrate by Aur1p but not by the remodelases. Thus, remodeling is not mediated by Aur1p although remodeling presumably proceeds by an analogous reaction. Studies with secretion mutants deficient in COPII or COPI coat proteins show that all COPII mutants are unable to introduce [3H]Cer by the Golgi remodelase at the restrictive temperature. This suggests that Cer has to be transported by a COPII-dependent way from the endoplasmic reticulum to Golgi for Golgi remodeling to occur. Golgi remodeling is also not operating in the erd2 mutant and is significantly reduced in COPI mutants, suggesting a dependence of Golgi remodeling on retrotransport.     

On the attenuation and dispersion of first sound near the superfluid transition in He4

In this paper available measurements of the attenuation and dispersion of first sound near the superfluid transition in He⁴ are re-examined. Particular attention is given to the effect of the gravitational inhomogeneity upon the measurements, and the thermodynamic velocity is used to obtain the dispersion contribution from measured velocities at nonzero frequencies. The re-interpreted results are discussed in terms of current theories. Although there is partial agreement between experiment and theory, a number of aspects of the problem requires further theoretical and experimental investigation.     

An Iterative Model for the Steady-State Current Distribution in Oxide-Confined VCSELs

This paper presents an iterative model for the analysis of the current distribution in vertical-cavity surface-emitting lasers (VCSELs) using a SPICE-like approach. The model includes a degeneracy correction for operation at and above threshold. The effect of the resistance due to the p-distributed Bragg reflector (p-DBR) mirror layers and the oxide layer on performance is investigated. Higher sheet resistance under the oxide layer reduces the threshold current, but reduces the current range over which single transverse mode operation occurs. The voltage drop across the p-DBR region dominates spatial hole burning, which is moderated by lateral drift and diffusion. This simple iterative model is applied to commercially available oxide-confined VCSELs.     

The effect of chlorine and oxygen concentrations on the removal of mercury at an FGD-batch reactor

A series of laboratory scale experiments were conducted in an FGD-batch reactor. A synthetic flue gas was produced and directed through a CaCO₃ suspension contained in a glass reactor vessel. The suspension temperature was set at 54 °C through a water bath. In order to observe the distribution of mercury species in the system, solid, liquid and gaseous samples were taken and analysed. For gaseous mercury determination, continuous measurements were carried out, up and downstream the reactor. Furthermore, the concentration of chlorine in the scrubber solution of the system was varied from 0 to 62 g/l under different oxidative conditions.In a first approach, a concentration drop of elemental mercury coming out of the system was observed. The latter occurs only when high concentrations of Cl⁻ are present, combined with a high O₂ availability in the scrubber. It was also observed that mercury species distribution in the different phases varies, depending on the available chemical form of chlorine and oxygen concentration.     

Hybridization effect of cellulose paper and postcuring conditions on the mechanical properties of flax fiber reinforced epoxy biocomposite

An ever-increasing rise in demand for sustainable materials has received significant attention in developing biocomposites for structural applications. In this regard, natural fibers replacing synthetic fibers as reinforcement in epoxy composite could be a significant gain toward sustainability, especially in automobile and structural applications. Herein, flax fiber/cellulose paper–reinforced epoxy biocomposite (FREC-X) was fabricated via a vacuum infusion process. The influence of postcuring conditions (time and temperature) and cellulose paper density on the mechanical properties of FREC-X was studied. The tensile strength and modulus of FREC-X increased by 37% and 64%, respectively, upon the integration of paper. Postcuring FREC-X further augmented the tensile and flexural properties of the composite, which could be attributed to the increase in cross-linking of the epoxy and yields a strong polymer network. Fractography analysis confirmed that the composites integrated with paper showed fewer defects with improved interfacial adhesion. In addition, the water absorption and thickness swelling results revealed that the presence of cellulose paper marginally increased the water uptake and thickness swelling of FREC-X. Furthermore, there was no significant change in the tensile and flexural properties of FREC-X observed even after immersing in water for >200 h. Such properties of FREC-X seen as a fascinating alternative to synthetic fibers and petroleum-based epoxy and are promising material for sustainable development.     

A two-stage subsurface vertical flow constructed wetland for high-rate nitrogen removal.

By using a two-stage constructed wetland (CW) system operated with an organic load of 40 gCOD.m(-2).d(-1) (2 m2 per person equivalent) average nitrogen removal efficiencies of about 50% and average nitrogen elimination rates of 980 g N.m(-2).yr(-1) could be achieved. Two vertical flow beds with intermittent loading have been operated in series. The first stage uses sand with a grain size of 2-3.2 mm for the main layer and has a drainage layer that is impounded; the second stage sand with a grain size of 0.06-4 mm and a drainage layer with free drainage. The high nitrogen removal can be achieved without recirculation thus it is possible to operate the two-stage CW system without energy input. The paper shows performance data for the two-stage CW system regarding removal of organic matter and nitrogen for the two year operating period of the system. Additionally, its efficiency is compared with the efficiency of a single-stage vertical flow CW system designed and operated according to the Austrian design standards with 4 m2 per person equivalent. The comparison shows that a higher effluent quality could be reached with the two-stage system although the two-stage CW system is operated with the double organic load or half the specific surface area requirement, respectively. Another advantage is that the specific investment costs of the two-stage CW system amount to 1,200 EUR per person (without mechanical pre-treatment) and are only about 60% of the specific investment costs of the singe-stage CW system.