Use of sea water in the flotation of carbonate rich sedimentary phosphate rock

There is an appreciable amount of carbonaceous sedimentary phosphate deposits in the northern Africa and the Middle East which are expected to gain importance in the near future because of the depletion of the deposits in Florida. In many of the regions where phosphate deposits are found there is a shortage of fresh water, and sea is not very far. The use of sea water instead of fresh water in flotation of carbonaceous phosphate rock is successfully demonstrated. Thus an appreciable reduction in the operating cost and an ample amount of saving in the fresh water resources of the region is expected.     

Swelling activation energy of κ‐carrageenan in its gel state: A fluorescence study

A steady‐state fluorescence technique was employed to study the swelling of κ‐carrageenan gels at various temperatures. Pyranine was used as a fluorescence probe. The fluorescence intensity of pyranine was measured during the insitu swelling process of κ‐carrageenan gels. The fluorescence intensity increased exponentially as the swelling time increased. The increase in the fluorescence intensity was modeled with the Li–Tanaka equation, from which the swelling time constants and cooperative diffusion coefficients were determined. The swelling time constants decreased and the cooperative diffusion coefficients increased as the swelling temperature was increased. The swelling activation energies were measured to be 47.05 kJ/mol. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Equilibrium distributions of key components of spearmint oil in sub/supercritical carbon dioxide

Effects of temperature (at 35, 45 or 55°C) and pressure (10–110 atm) on the relative distribution coefficients of the twelve key components of spearmint oil (essential oil ofMentha cardiaca; Scotch spearmint) at equilibrium in dense CO₂ were investigated under conditions ranging from subcritical to supercritical regions. Effects of vapor pressure, molecular weight and polarity of the key components on their equilibrium distributions in sub/supercritical CO₂ are discussed. At 35°C, all key components of spearmint oil are equally soluble in dense CO₂ within the 12–102 atm pressure region. At 45 and 55°C, the key components are equally soluble for pressures greater than about 60 atm. However, around either 45°C/27 atm or 55°C/35 atm conditions, the relative distribution coefficients of all monoterpene hydrocarbons and of isomenthone (an oxygenated monoterpene) exhibit maxima, which are due to significantly higher vapor pressures of these components and significantly lower solvating power of the dense-gas solvent at these particular temperatures and pressures. Vapor-pressure effects, coupled with the decrease in solvating power, dominate the effects of polarity and molecular mass of the key components. Deterpenation of spearmint oil with dense CO₂ is possible around either 45°C/27 atm or 55°C/35 atm, where the monoterpene hydrocarbons tend to concentrate in the CO₂-rich phase.     

Coherent precipitation in a high-temperature Cr–Ni–Al–Ti Alloy

Chromium alloys present a potential for development of new high-temperature materials. Precipitation characteristics of a Cr–5Ni–5Al–0.5Ti (at.%) alloy were investigated utilizing a series of heat treatments. XRD, SEM, and analytical TEM were used to characterize the microstructure. This study has shown that the small spherical B2-NiAl precipitates forming below 1345 °C are highly coherent and have a well-defined orientation relationship with the Cr-matrix. Also, some evidence has been presented for the formation of L2₁-Ni₂AlTi phase within the B2-NiAl phase.     

Bathroom as a modern space

Mundane objects and their everyday practices contain clues to the prevalent ideas and ideals of a society at a certain time; thus holding the power to decipher collective ideologies, contemporary beliefs, social norms and shared values. Bathroom fixtures are such ordinary products of the built environment that seem to be simultaneously insignificant and indispensable parts of daily life. This study is an historical analysis of the bathroom as a social space and of its fixtures as material culture. It reflects ideas and identities around the convoluted notions of modernisation and Westernisation in the Turkish context. It suggests that the values of being modern contributed to the transformation of traditional bathroom practices through spatial mechanisms and equipment. To unpack these values, the study engages the examination of oral histories, literary works, journals and flat plans as well as extant bathrooms. The research shows that the bathroom is a product of global modernity. Mediated through flats, which proliferated as a sign of contemporary living, the Western-style bathroom became the norm while its traditional counterpart became its other. This shift in perception indicates a concern for belonging to the world civilisation in the form of an aspiration toward being Western. A universal idea of modernisation pervades the ordinary domestic space of the bathroom and its everyday practices.     

Developing microencapsulated 12‐hydroxystearic acid (HSA) for phase change material use

Phase change materials (PCM) have an increasingly more important role as a thermal energy storage (TES) media. However, leakage problem of PCM causes limitation during their integration in TES systems. Therefore, the encapsulation of PCMs is attracting research interest to extend usage of PCMs in real TES applications in recent years. In this study, hydroxystearic acid (HSA) was encapsulated with polymethyl methacrylate (PMMA) and different PMMA comonomer shells via emulsion polymerization method for the first time in literature. HSA with high melting temperature range (74–78°C) can widen the scope of using PCMs, and the encapsulated form can make it more versatile. The chemical structures, morphologies, and thermophysical properties of capsules were determined by FT‐IR, SEM, DSC, TGA, and thermal infrared camera. Among the produced HSA capsule candidates, PMMA‐HEMA is the most promising with latent heat of 48.5 J/g with melting range of 47 to 85°C. SEM analysis indicated that the capsules have spherical shape with compact surface at nano‐micro (100–440 nm) size range; however, some capsules exhibited agglomeration.     

Laboratory investigation on the use of thermally enhanced phase change material to improve the performance of borehole heat exchangers for ground source heat pumps

Ground source heat pumps have high efficiency and high capital cost primarily due to borehole drillings. This research investigates the inclusion of high‐conductivity phase change material (PCM) in the borehole heat exchanger of a ground source heat pump to reduce the borehole length required and improve its coefficient of performance (COP). In the laboratory model, the borehole heat exchanger was represented by a cylindrical electrical heater having a total power of 9.216 W, operating for 1 hour while resting for 3 hours. Surrounding the heater in the annular region, either soil, PCM, or high‐conductivity PCM was used as grouting material. The annular region was surrounded by a large amount of soil enclosed in a large bin as a representation of ground soil. The high‐conductivity graphite was impregnated with the commercial PCM “PureTemp29.” Results from the experiments revealed that the PCM is able to decrease the temperature fluctuations in the annular and soil regions, while graphite increases the thermal conductivity of the annular region and hence increases the rate of heat dissipation from the heater to the soil surrounding it. The maximum COP values of a ground source heat pump calculated assuming ideal reversed Carnot cycle for cooling mode showed an increase of approximately 81% with PCM and by 112% with graphite‐enhanced PCM.     

Thermal buffering effect of a packaging design with microencapsulated phase change material

Temperature fluctuations during storage and transportation are the most important factors affecting quality and shelf life of food products. Phase change materials (PCM) with their isothermal characteristics are used to control temperature in various thermal operations. In this study, octanoic acid as PCM candidate was used in a packaging material design for thermal control of a food product. The PCM candidate was microencapsulated in different shell materials in our laboratory. Among the synthesized microcapsules, microencapsulated PCM (mPCM) (ΔHm = 42.9 J/g) with styrene polymer as the shell material was selected based on its properties of being cost effective and compatibility with human health. Thermal buffering effect of PCM in bulk and microencapsulated forms was tested in a packaging design with special PCM pockets. Results showed that packages with mPCM and bulk PCM provided 8.8 and 6 hours of thermal buffering effect for 160 g of chocolate compared with the package without PCM (reference package).     

The effect of granulocyte colony-stimulating factor (G-CSF) on bacterial translocation in the splenectomized rat

BACKGROUND/AIMS: We created a study group in order to investigate the effects of splenectomy and filgrastim. Filgrastim is an immunomodulator granulocyte colony-stimulating factor (G-CSF), that affects bacterial translocation. MATERIALS AND METHODS: We created 3 study groups with 30 male Sprague-Dawley rats; the first group included sham splenectomy, the second group was splenectomy, and the third group was splenectomy+ filgrastim group. RESULTS: The mean bacterial colony count of the cecum were 2.5 x 10(9) in group 1, 1.2 x 10(10) in group 2 and 3.5 x 10(9) in group 3. The differences between these groups were accepted as statistically significant. The mean counts of the terminal ileum were 1.1 x 10(9) in group 1, 5.5 x 10(10) in group 2 and 2.5 x 10(10) in group 3. The p values of group 1-2 were 0.036 (statistically significant) and 0.123 in groups 2-3) were not statistically significant. The mean counts of the liver were 0.2 x 10(4), 1 x 10(10) and 3.4 x 10(5), respectively. In comparison of the groups the p values of the first and last 2 groups were found to be 0.047 (statistically significant). The mean counts of the mesenteric lymph node were 0.7 x 10(3), 1 x 10(10) and 0.9 x 10(6) respectively. The p values were 0.343 for the first and the last 2 groups both. As they were above 0.05, they were not statistically significant. The degrees of liver Kupffer cell hyperplasia were (+) 40%, (+2) 50% and (+3) 10% (group 1), (+) 10%, (+2) 40% and (+3) 50% (group 2), (+2) 60% and (+3) 40% (group 3) (p = 0.0039). The rates of the absence of pathology in mesenteric lymph nodes were 70% (group 1), 90% (group 2) and 100% (group 3) (p = 0.049). These findings were statistically significant. CONCLUSIONS: We found that splenectomy has activated the whole predisposing factors of bacterial translocation and created the latter itself. In addition, we showed that filgrastim, a recently widespread used G-CSF, decreases bacterial translocation significantly.