A variable friction model that relates the parameters of sheet metal drawing to the local lubrication conditions taking place during the deformation, has been integrated to a finite element program. Variable friction coefficients for the contacting surfaces are determined from the friction model, which uses the related parameters obtained at each time step of the finite element program as inputs. A number of numerical runs have been performed and the strains are compared with the experimental results for circular blanks. A good agreement is obtained between the numerical and experimental results for the variable friction model used. 相似文献
In the age of Business-to-Business (B2B) collaboration, ensuring reliability of workflows underlying inter-organizational business processes is of significant importance. There are, however, quite a few challenges towards achieving seamless operation. Such challenges arise from heterogeneity in infrastructure and coordination mechanism at participant organizations, as well as time and cost associated with recovery from failure. Our research presents foundations for a reliable scheme for recovery from failure of workflow processes spanning through multiple business entities. First, a system model is adapted from the mobile computing literature that serves to establish the requirements to be enforced by each participating organization. In our model, we adopt the Maximal Sequence Path (MSP) approach from Yoo et al. (Lecture Notes in Artificial Intelligence 2132:222–236, 2001), as a means of decomposing workflows into mobile agent-driven processes that communicate via web services at each organization. This decomposition ensures defining logical points within the dynamics of a workflow instance for locating accurate and consistent states of the system for recovery in case of a failure. Then, a set of algorithms for various business scenarios are developed and presented as practical solutions. These algorithms are shown to create checkpoints such that the system is always in a globally consistent state. As such, these algorithms constitute a set of standards that can be incorporated in business process management suites that support reliable inter-organizational collaboration. 相似文献
In this study, the effect of animation enhanced conceptual change texts (CCT–CA) on grade 6 students’ understanding of the particulate nature of matter (PNM) and transformation during the phase changes was investigated. A quasi-experimental design and one control group (CG, N = 25) and one experimental group (EG, N = 26) were used. While the control group taught traditional instruction, the experimental group received CCT–CA instruction. Two different tests, The Particulate Nature of Matter Concept Test (ParNoMaC) and The Transformation of Matter Statement Test (ToMaSaT), were administered as pretest, posttest and delayed test to collect data. Results indicate that while there is no statistically significant difference between groups in pretest, performance of EG students is greater than the CG ones in posttest and delayed test. And also, the EG students are better in remediating their alternative conceptions related to the PNM and transformations during the phase changes. Based on the study, it is concluded that CCT–CA combination may be effective way to improve students’ understanding of basic science and chemical concepts. 相似文献
Applications in industry often have grown and improved over many years. Since their performance demands increase, they also need to benefit from the availability of multi-core processors. However, a reimplementation from scratch and even a restructuring of these industrial applications is very expensive, often due to high certification efforts. Therefore, a strategy for a systematic parallelization of legacy code is needed. We present a parallelization approach for hard real-time systems, which ensures a high reusage of legacy code and preserves timing analysability. To show its applicability, we apply it on the core algorithm of an avionics application as well as on the control program of a large construction machine. We create models of the legacy programs showing the potential of parallelism, optimize them and change the source codes accordingly. The parallelized applications are placed on a predictable multi-core processor with up to 18 cores. For evaluation, we compare the worst case execution times and their speedups. Furthermore, we analyse limitations coming up at the parallelization process. 相似文献
The lead free Sn–Ag–y%Cu (y = 0.0, 0.5, 1.0 and 2.0) interconnect interfacial microstructures and the microstructure evolution under thermal treatment (isothermal aging, 150 °C/1000 h) were studied in detail by using surface microetching microscopy and cross section microscopy. The corresponding mechanical and reliability behaviors were evaluated by performing shear test and fracture mode analysis before and after the thermal treatment. The results indicate: (i) The interconnects could have different microstructures and intermetallic compound (IMC), depending on the Cu content. The Cu–Sn IMC could have microstructures that were clusters or protrusion-like, Augustine grass leaf-like, scissor-like, tweezers-like, etc. (ii) Ag3Sn IMCs were not observed at time zero for any interconnect groups, but they occurred after the aging for all groups. The Ag3Sn IMC could have different microstructures, again depending on Cu content. For low Cu content, the Ag3Sn IMCs were granules or nodules; for higher Cu content, Ag3Sn IMCs were plate-like. (iii) The growth of Ag3Sn plates was promoted by the growth of Cu–Sn IMCs, but indirectly linked to the Cu content. (iv) High Cu content (1.0 wt% and higher) could degrade the mechanical and reliability performances of the LF interconnect by providing a brittle joint, which was mainly achieved through the substantial growth of Cu–Sn IMCs and Ag3Sn plates. 相似文献
Lefke stone is a sandstone that has been widely used in mosques, madrasas, churches, and houses as building stone. The geological features and engineering properties of Lefke stone outcropped in the southern part of Osmaneli/Bilecik were investigated in field and laboratory studies. Samples acquired during the fieldwork were tested to determine the physical, mechanical, durability, and hygrothermal properties in the laboratory. The mean physico-mechanical properties of Lefke stone yielded apparent density of 2.38 g/cm3, specific gravity of 2.68 g/cm3, total porosity of 11.26%, 2.93% water absorption by weight, uniaxial compressive strength of 94 MPa, flexure strength of 11.45 MPa, a 3.90 MPa point load strength, 4.5–5 Mohs hardness, and field Schmidt hammer rebound value of 36. According to durability tests, Lefke stone is resistant to CaCl2 salt mist but has low resistance to SO2 aging. Salt crystals placed in the discontinuities of the rock caused slight crack growth. The stone’s resistance to crystallization of sodium sulphate salt is low, and an increase in the volume of salts crystallized in the rock results in low corner strengths. A capillary water-absorption value of 0.0016 kg/m2.h places Lefke stone into the category of very low water absorption capacity and permeability. The water vapor diffusion resistance factor (μ) less than 1 indicates that the sandstone has high breathability. Its performance in historical buildings, field observations, and values obtained through laboratory tests confirm that Lefke sandstone can be used as a building stone.
The perception of a visual target can be strongly influenced by flanking stimuli. In static displays, performance on the target improves when the distance to the flanking elements increases—presumably because feature pooling and integration vanishes with distance. Here, we studied feature integration with dynamic stimuli. We show that features of single elements presented within a continuous motion stream are integrated largely independent of spatial distance (and orientation). Hence, space-based models of feature integration cannot be extended to dynamic stimuli. We suggest that feature integration is guided by perceptual grouping operations that maintain the identity of perceptual objects over space and time. (PsycINFO Database Record (c) 2010 APA, all rights reserved) 相似文献
The goal of this study was to quantify the contribution of extracellular polymeric substances (EPS) to U(VI) immobilization by Shewanella sp. HRCR-1. Through comparison of U(VI) immobilization using cells with bound EPS (bEPS) and cells with minimal EPS, we show that (i) bEPS from Shewanella sp. HRCR-1 biofilms contribute significantly to U(VI) immobilization, especially at low initial U(VI) concentrations, through both sorption and reduction; (ii) bEPS can be considered a functional extension of the cells for U(VI) immobilization and they likely play more important roles at lower initial U(VI) concentrations; and (iii) the U(VI) reduction efficiency is dependent upon the initial U(VI) concentration and decreases at lower concentrations. To quantify the relative contributions of sorption and reduction to U(VI) immobilization by EPS fractions, we isolated loosely associated EPS (laEPS) and bEPS from Shewanella sp. HRCR-1 biofilms grown in a hollow fiber membrane biofilm reactor and tested their reactivity with U(VI). We found that, when reduced, the isolated cell-free EPS fractions could reduce U(VI). Polysaccharides in the EPS likely contributed to U(VI) sorption and dominated the reactivity of laEPS, while redox active components (e.g., outer membrane c-type cytochromes), especially in bEPS, possibly facilitated U(VI) reduction. 相似文献
One of the challenges in using wireless sensors that require high power to monitor the environment is finding a renewable power source that can produce enough power. Sediment microbial fuel cells (SMFCs) are considered an alternative renewable power source for remote monitoring, but current research on SMFCs has demonstrated that they can only produce several to tens of mW of continuous power. This limits the use of SMFCs as an alternative renewable remote power source to mW-level power. Such low power is only enough to operate a low-power sensors. However, there are many remote sensors that require higher power, on the order of watts. Current technology using a SMFC to power a remote sensor requiring watts-level intermittent power is limited because of limitations of power management technology. Our goal was to develop a power management system (PMS) that enables a SMFC to operate a remote sensor consuming 2.5 W of power. We designed a custom PMS to store microbial energy in capacitors and use the stored energy in short bursts. Our results demonstrate that SMFCs can be a viable alternative renewable power source for remote sensors requiring high power. 相似文献