Validation and modification of WAVE spray model for diesel combustion simulation

In CFD simulation of diesel combustion, the predictive capabilities of the spray model play the most important role. Consequently, under the strict guidelines of the V&V, a method to adjust parameters of diesel spray model WAVE to accompany with the in-cylinder physical progress has been investigated in this paper. Moreover, the simulation of the spray has been validated by high-speed photography experiments and verified by the equation proposed by Hiroyasu. Finally, a modified setup for the WAVE spray model has been proposed and applied in the spray and combustion simulation for Deutz1013 diesel in different engine speed.     

Unsaturated para-linked aromatic LC polyesters: Thermotropic and lyotropic systems

Liquid-crystalline thermosets (LCT) are a new class of materials which combine typical properties of LC polymers with those of conventional thermosets. This article reports on the development of a lyotropic LC thermoset (LLCT) in which the solvent is a vinyl monomer. Such an LLCT is expected to have several advantages compared to conventional unsaturated polyester resins. The synthesis and characterization of a variety of novel substituted para-linked aromatic polyesters and copolyesters containing unsaturated fumaroyl units is presented. The thermal and liquid crystal properties were investigated. It is demonstrated that it is possible to prepare a lyotropic LC solution in styrene. These lyotropic solutions are capable of thermal crosslinking by the addition of a free-radical initiator. © 1995 John Wiley & Sons, Inc.     

An NMR-based metabolomic assessment of cultured cobia health in response to dietary manipulation

Commercial aquaculture feeds rely heavily on fishmeal and fish oil, which can be expensive and ecologically unsustainable. To evaluate the efficacy of reduced fishmeal diets for outgrowth, a dietary study was conducted on the finfish cobia, Rachycentron canadum. NMR-based metabolomic techniques were used to assess the effect of decreasing dietary fishmeal on the health of the cobia. Filtered serum ¹H NMR spectra analysed by principal components analysis (PCA) showed cobia fed reduced fishmeal diets were metabolically different than cobia on control diets. In particular, tyrosine and betaine increased in cobia fed reduced fishmeal diets while glucose decreased, suggesting that these cobia were not receiving the necessary nutritional components required for energy and growth. The formulated control diet contributed to enriched growth and significantly elevated lactate levels suggesting enhanced gut microflora metabolism in response to dietary components. The results show that NMR-based metabolomic analysis is a useful tool in aquaculture studies.     

Development of CuInS2-based solar cells and modules

Starting from a small area cell published in 1993, CuInS₂ technology has been continuously improved with respect to performance and manufacturability. Major milestones include successful preparation by rapid thermal processing, a monolithically integrated module test structure on a 5×5 cm² substrate, implementation of an industrial pilot line, incorporation of gallium for higher open circuit voltages and better performance and demonstration of Cd-free devices. Phase formation, reaction pathways and interdiffusion mechanisms have been investigated and modelled as have been electronic and device properties such as current transport. This review summarizes the most significant aspects of development and our current understanding of the technology.     

Influence of some environmental substances on atrazine adsorption in Baiyangdian lake area soil

Recent reports have attempted to show that fluoridating potable water is linked to increased levels of lead(II) in the blood. We examine these claims in light of the established science and critically evaluate their significance. The completeness of hexafluoro‐silicate hydrolysis is of paramount importance in ensuring that total water quality is maintained. The possible impacts of such complexes as Pb^II—F—SiF₅ or PbF_x ^(2‐x) are discussed as are the contributions of fluoridation byproducts to total acid content. We calculate the fractional distribution of aqueous species based on known chemical equilibria and show the species concentrations for several different model tap waters. We discuss and quantitatively show the effects of other complexing anions, such as carbonate or hydroxide. Overall, we conclude that no credible evidence exists to show that water fluoridation has any quantitatable effects on the solubility, bioavailability, bio‐accumulation, or reactivity of lead(0) or lead(II) compounds. The governing factors are the concentrations of a number of other species, such as (bi)carbonate, hydroxide, or chloride, whose effects far exceed those of fluoride or fluorosilicates under drinking water conditions. Lastly, we consider some previous epidemiological studies of lead(II) exposure and how recent papers fare methodologically.     

Gallium gradients in Cu(In,Ga)Se2 thin‐film solar cells

The gallium gradient in Cu(In,Ga)Se₂ (CIGS) layers, which forms during the two industrially relevant deposition routes, the sequential and co‐evaporation processes, plays a key role in the device performance of CIGS thin‐film modules. In this contribution, we present a comprehensive study on the formation, nature, and consequences of gallium gradients in CIGS solar cells. The formation of gallium gradients is analyzed in real time during a rapid selenization process by in situ X‐ray measurements. In addition, the gallium grading of a CIGS layer grown with an in‐line co‐evaporation process is analyzed by means of depth profiling with mass spectrometry. This gallium gradient of a real solar cell served as input data for device simulations. Depth‐dependent occurrence of lateral inhomogeneities on the µm scale in CIGS deposited by the co‐evaporation process was investigated by highly spatially resolved luminescence measurements on etched CIGS samples, which revealed a dependence of the optical bandgap, the quasi‐Fermi level splitting, transition levels, and the vertical gallium gradient. Transmission electron microscopy analyses of CIGS cross‐sections point to a difference in gallium content in the near surface region of neighboring grains. Migration barriers for a copper‐vacancy‐mediated indium and gallium diffusion in CuInSe₂ and CuGaSe₂ were calculated using density functional theory. The migration barrier for the In_Cu antisite in CuGaSe₂ is significantly lower compared with the Ga_Cu antisite in CuInSe₂, which is in accordance with the experimentally observed Ga gradients in CIGS layers grown by co‐evaporation and selenization processes. Copyright © 2014 John Wiley & Sons, Ltd.     

Time‐resolved investigation of Cu(In,Ga)Se2 growth and Ga gradient formation during fast selenisation of metallic precursors

Ga segregation at the backside of Cu(In,Ga)Se₂ solar cell absorbers is a commonly observed phenomenon for a large variety of sequential fabrication processes. Here, we investigate the correlation between Se incorporation, phase formation and Ga segregation during fast selenisation of Cu–In–Ga precursor films in elemental selenium vapour. Se incorporation and phase formation are analysed by real‐time synchrotron‐based X‐ray diffraction and fluorescence analysis. Correlations between phase formation and depth distributions are gained by interrupting the process at several points and by subsequent ex situ cross‐sectional electron microscopy and Raman spectroscopy. The presented results reveal that the main share of Se incorporation takes place within a few seconds during formation of In–Se at the top part of the film, accompanied by outdiffusion of In out of a ternary Cu–In–Ga phase. Surprisingly, CuInSe₂ starts to form at the surface on top of the In–Se layer, leading to an intermediate double graded Cu depth distribution. The remaining Ga‐rich metal phase at the back is finally selenised by indiffusion of Se. On the basis of a proposed growth model, we discuss possible strategies and limitations for the avoidance of Ga segregation during fast selenisation of metallic precursors. Solar cells made from samples selenised with a total annealing time of 6.5 min reached conversion efficiencies of up to 14.2 % (total area, without anti‐reflective coating). The evolution of the Cu(In,Ga)Se₂ diffraction signals reveals that the minimum process time for high‐quality Cu(In,Ga)Se₂ absorbers is limited by cation ordering rather than Se incorporation. Copyright © 2014 John Wiley & Sons, Ltd.     

RPV material investigations of the former VVER-440 Greifswald NPP

The real toughness response of RPV material can only be determined after the final shut down of the NPP. Such a chance is given now by investigating material from the former Greifswald NPP (VVER-440/230).In the first part the paper deals with fast neutron fluence calculations and retrospective dosimetry based on Niobium. Unfortunately, a second neutron reaction besides ⁹³Nb(n,n’) leading to ^93mNb-activity is the reaction ⁹²Mo(n,γ)⁹³Mo. Based on the found Nb and Mo contents in the RPV material, it turned out that the ^93mNb generation on the Mo path mostly dominates over the fast neutron induced generation from Nb.The comparison between the calculated and the measured ^93mNb activities typically resulted in deviations of 50%. Possible reasons for the observed differences are discussed.In the second part first results of fracture mechanic investigations are reported. SE(B) specimens from three thickness positions were tested and evaluated according to the test standard ASTM E1921-05. Cleavage fracture toughness values, K_Jc, were determined and Master Curve based reference temperatures (T₀) were evaluated. The T₀ measured at the inner surface of the RPV did not represent the conservative condition. The T₀ of disc 1-1.3 located between the surface and 1/4 thickness is about 40K higher compared with those of the surface.The measured K_Jc values are not enveloped by the 5% fractile indexed with T₀ according to the Master Curve concept. However, the 5% fractile indexed with the VERLIFE reference temperature RTT_o that includes an additional margin envelops the measured K_Jc values. Therefore the VERLIFE lower bound curve conservatively describes the fracture toughness of the investigated weld metal.     

Surface Cu depletion of Cu(In,Ga)Se2 films: An investigation by hard X-ray photoelectron spectroscopy

The origin of surface Cu depletion of polycrystalline chalcopyrite thin films and its consequences for the physics of related solar cells have been discussed for the past 15 years. In order to shed light on the composition and thickness of this Cu-depleted surface layer, depth-dependent compositional analysis by hard X-ray photoelectron spectroscopy was performed. The data from Cu-poor grown Cu(In,Ga)Se₂ samples point to a surface layer in the sub-nanometer regime, which is completely depleted of Cu. This result supports the surface reconstruction model proposed by first-principles calculations by other authors. Analysis of the surface morphology of the investigated samples confirms the conjunction of Cu depletion and faceting of the surface. Theoretical considerations show that the apparent surface concentration ratio of [Cu]/([In] + [Ga]) = 1/3 found by conventional photoelectron spectroscopy studies can be explained by the surface reconstruction model.     

Carbon nanowalls deposited by inductively coupled plasma enhanced chemical vapor deposition using aluminum acetylacetonate as precursor

Well aligned carbon nanowalls, a few nanometers thick, were fabricated by continuous flow of aluminum acetylacetonate (Al(acac)₃) without a catalyst, and independent of substrate material. The nanowalls were grown on Si, and steel substrates using inductively coupled plasma-enhanced chemical vapor deposition. Deposition parameters like flow of argon gas and substrate temperature were correlated with the growth of carbon nanowalls. For a high flow of argon carrier gas, an increased amount of aluminum in the film and a reduced lateral size of the carbon walls were found. The aluminum is present inside the carbon nanowall matrix in the form of well crystallized nanosized Al₄C₃ precipitates.