Exposure to virtual nature: the impact of different immersion levels on skin conductance level,heart rate,and perceived relaxation

Virtual Reality - It is generally accepted that natural environments reduce stress and improve mood. Since access to natural environments is sometimes limited, virtual natural environments,...     

Equal-channel angular extrusion of beryllium

The equal-channel angular extrusion (ECAE) technique has been applied to a powder metallurgy (P/M) source Be alloy. Extrusions have been successfully completed on Ni-canned billets of Be at approximately 425°C. No cracking was observed in the billets, and significant grain refinement was achieved. In this article, microstructural features and dislocation structures are discussed for a singlepass extrusion, including evidence of <c> and <c+a> dislocations. Significant crystallographic texture developed during ECAE, which is discussed in terms of this unique deformation processing technique and the underlying physical processes which sustain the deformation. S.R. AGNEW, formerly with the Oak Ridge National Laboratory, Oak Ridge, TN 37831-6115 This article is based on a presentation made in the symposium entitled “Defect Properties and Mechanical Behavior of HCP Metals and Alloys” at the TMS Annual Meeting, February 11–15, 2001, in New Orleans, Louisiana, under the auspices of the following ASM committees: Materials Science Critical Technology Sector, Structural Materials Division, Electronic, Magnetic & Photonic Materials Division, Chemistry & Physics of Materials Committee, Joint Nuclear Materials Committee, and Titanium Committee.     

Gelsolin is a downstream effector of rac for fibroblast motility

Rac, a member of the rho family of GTPases, when activated transmits signals leading to actin-based membrane ruffling in fibroblasts. Compared with wild-type fibroblasts, gelsolin null (Gsn-) dermal fibroblasts have a markedly reduced ruffling response to serum or EGF stimulation, which signal through rac. Bradykinin-induced filopodial formation, attributable to activation of cdc42, is similar in both cell types. Wild-type fibroblasts exhibit typical lamellipodial extension during translational locomotion, whereas Gsn- cells move 50% slower using structures resembling filopodia. Multiple Gsn- tissues as well as Gsn- fibroblasts overexpress rac, but not cdc42 or rho, 5-fold. Re-expression of gelsolin in Gsn- fibroblasts by stable transfection or adenovirus reverts the ruffling response, translational motility and rac expression to normal. Rac migrates to the cell membrane following EGF stimulation in both cell types. Gelsolin is an essential effector of rac-mediated actin dynamics, acting downstream of rac recruitment to the membrane.     

Chronically Elevated Exogenous Glucose Elicits Antipodal Effects on the Proteome Signature of Differentiating Human iPSC-Derived Pancreatic Progenitors

The past decade revealed that cell identity changes, such as dedifferentiation or transdifferentiation, accompany the insulin-producing β-cell decay in most diabetes conditions. Mapping and controlling the mechanisms governing these processes is, thus, extremely valuable for managing the disease progression. Extracellular glucose is known to influence cell identity by impacting the redox balance. Here, we use global proteomics and pathway analysis to map the response of differentiating human pancreatic progenitors to chronically increased in vitro glucose levels. We show that exogenous high glucose levels impact different protein subsets in a concentration-dependent manner. In contrast, regardless of concentration, glucose elicits an antipodal effect on the proteome landscape, inducing both beneficial and detrimental changes in regard to achieving the desired islet cell fingerprint. Furthermore, we identified that only a subgroup of these effects and pathways are regulated by changes in redox balance. Our study highlights a complex effect of exogenous glucose on differentiating pancreas progenitors characterized by a distinct proteome signature.     

Is LRP2 Involved in Leptin Transport over the Blood-Brain Barrier and Development of Obesity?

The mechanisms underlying the transport of leptin into the brain are still largely unclear. While the leptin receptor has been implicated in the transport process, recent evidence has suggested an additional role of LRP2 (megalin). To evaluate the function of LRP2 for leptin transport across the blood-brain barrier (BBB), we developed a novel leptin-luciferase fusion protein (pLG), which stimulated leptin signaling and was transported in an in vitro BBB model based on porcine endothelial cells. The LRP inhibitor RAP did not affect leptin transport, arguing against a role of LRP2. In line with this, the selective deletion of LRP2 in brain endothelial cells and epithelial cells of the choroid plexus did not influence bodyweight, body composition, food intake, or energy expenditure of mice. These findings suggest that LRP2 at the BBB is not involved in the transport of leptin into the brain, nor in the development of obesity as has previously been described.     

Biosynthesis and identification of volatiles released by the myxobacterium Stigmatella aurantiaca

The volatiles released by agar plate cultures of two strains of the myxobacterium Stigmatella aurantiaca (strains Sg a15 and DW4/3-1) were collected in a closed-loop stripping apparatus (CLSA) and analyzed by GC-MS. Large numbers of substances from different compound classes (ketones, esters, lactones, terpenes, and sulfur and nitrogen compounds) were identified; several of them are reported from natural sources for the first time. The volatiles 2-methyltridecan-4-one (17), its isomer 3-methyltridecan-4-one (20), and the higher homologue 2-methyltetradecan-4-one (18) were identified in the extracts of both strains and were synthesized. In addition, strain Sg a15 produced 2,12-dimethyltridecan-4-one (19), 2-methyltridec-2-en-4-one (23), and a series of phenyl ketones, among them 1-phenyldecan-1-one (14) and 9-methyl-1-phenyldecan-1-one (16), whereas strain DW4/3-1 emitted traces of 10-methylundecan-2-one (21). The biosynthesis of 14 and 16 was examined in feeding experiments with deuterated precursors carried out on agar plate cultures. The leucine-derived starter unit isovalerate was shown to be incorporated into 16, as was phenylalanine-derived benzoic acid into both 14 and 16. The results point to formation both of the phenyl ketones and of the structurally related aliphatic ketones through an unusual head-to-head coupling between a starter unit such as benzoyl-CoA and a fatty acyl-CoA, followed by decarboxylation.     

Development and characterization of a biocompatible OH-modified copolymer based on polyurethane

Different polyurethanes were synthesized by varying the diol as well as the diisocyanate components and chain extenders. Polyurethanes with OH-groups were obtained by photo- and thermoinitiation of the radical polymerization of hydroxy alkyl acrylates in the presence of the polyurethanes. The polymers were evaluated with respect to their biocompatibility by measuring the cell spreading, the rates of DNA- and protein synthesis and the swelling behaviour. The differences in the surfaces and the bulks between the selected basic polyurethane and the functionalized modification were determined and characterized by XPS, FTIR-ATR and ¹³C-FT-NMR-spectroscopy. The mechanical data of Tecoflex EG 60D® and Pellethane 2363–80AE® were compared with the data of the synthesized polyurethanes.     

Thermal cure monitoring of phenolic resole resins based on in situ fluorescence technique

The thermal curing reaction of two phenolic resole resins is monitored using the fluorescence technique. The intrinsic fluorescence can be used as an indicator for cure monitoring for the first resole. As the thermal curing proceeds, the intrinsic fluorescence intensity of the resole resin decreases and exhibits a few nanometers of redshift. The fluorescence intensity of the emission maxima is correlated with the conversion measured by differential scanning spectroscopy. A linear correlation is found at three different temperatures. The intrinsic fluorescence cannot always be used for monitoring the curing process of phenolic resole resins. Thus, three intramolecular charge transfer compounds and two organic donor–π‐acceptor salts are selected and applied for the cure monitoring of the second phenolic resole resin. As the curing reaction proceeds, the fluorescence emission spectra of the probes exhibit a blue spectral shift and the intensity changes because of environmental changes. An intensity ratio method is applied in which the ratios of the low‐ to high‐intensity changes in the emission bands are used to determine the degree of the curing process. There is a smooth correlation between the intensity ratio method and the degree of cure. The method enables one to follow the changes in the polymer structure at low and intermediate degrees of the curing process (below 70%) and obtain comparable results from different types of probes during the same curing process. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1773–1780, 2002     

Syntheses and reactions of urethanes of cellobiose and cellulose-containing uretdione groups

Urethanes of cellobiose and cellulose-containing uretdione groups are synthesized by the reaction of aliphatic and aromatic diisocyanate uretdiones with the saccharides. The syntheses are performed as a heterogeneous reaction in dimethyl acetamide using dibutyl tin dilaurate as a catalyst, as well as a homogeneous reaction in dimethyl acetamide-lithium chloride. Thus, Semisynthetic prepolymers are formed that offer the reactivity of (blocked) isocyanate groups. To demonstrate their reactivity, ring opening of the uretdiones is performed by the addition of a secondary amine to yield the corresponding ureas.