10 Gbit/s optical soliton transmission over 7200 km by using amonolithically integrated MQW-DFB-LD/MQW-EA modulator light source

The authors demonstrate 10 Gbit/s optical soliton transmission in a recirculating loop through the use of a monolithically integrated MQW-DFB-LD/MQW-EA modulator light source. The timing jitter due to the Gordon-Haus effect is successfully reduced by the optical bandpass filters conventionally used in the cascaded EDFAs to avoid the accumulation of amplified spontaneous emission. The transmission distance of 7200 km is achieved at a bit error rate of 10^-9     

Pulse-width tunable, self-frequency conversion of short opticalpulses over 200 nm based on supercontinuum generation

Self-frequency conversion of ultrashort optical pulses into arbitrary multiwavelength components without the use of a pump is achieved by using supercontinuum generation. Frequency conversion of a randomly-modulated 1.535-1.560 μm, 2.5 ps pulse stream at 6.3 Gbit/s into 1.41-1.64 μm, 0.29-1.0 ps pulse streams is demonstrated for the first time. The method features ultrawide tunability of over 200 nm, and multiwavelength, pulsewidth-tunable output for flexible WDM distribution networks     

High-speed picosecond optical pulse compression from gain-switched 1.3-µm distributed feedback-laser diode (DFB-LD) through highly dispersive single-mode fiber

Picosecond optical pulse compression characteristics of chirped pulses from gain-switched distributed feedback-laser diodes (DFB-LD) transmitting through highly dispersive media are studied theoretically and experimentally. It is clarified theoretically that gain-switched chirped pulses can be compressed to about a 0.7-time bandwidth product by normal dispersion of the dispersive media and that the optimum dispersion value to obtain a minimum compressed pulse is proportional to the square of original pulsewidth. Through a dispersion, shifted single-mode fiber with -48-ps/nm normal dispersion at a 1.3-μm wavelength, gain-switched 30-ps (FWHM) pulses from a directly modulated 1.3-μm DFB-LD at a 4.4-GHz repetition rate have been successfully compressed to 6.4-ps optical pulses with a 0.86-time bandwidth product. Experimental results agree with the theoretical analysis.     

Study of all-optical clock recovery performance by the primary and the secondary temporal Talbot effects in a second-order dispersive medium

We theoretically and experimentally study the all-optical clock recovery performance using the primary or the secondary temporal Talbot effects (PTTE or STTE, respectively) in a dispersive medium having the first-order dispersion together with the second-order dispersion (e.g., conventional single-mode fibers: SMFs). Our preliminary numerical simulations have indicated that the STTE-based all-optical clock recovery technique can improve double its performance as compared with the conventional PTTE-based technique when the second-order dispersion (dispersion slope) can be neglected. The following simulation results have revealed that the second-order dispersion, that the normal SMFs possess, limits the performance improvements in the STTE-based clock recovery, whereas the limited performance can be improved by appropriately compensating for the second-order dispersion. On the basis of our simulation results, experiments of the STTE-based clock recovery were conducted by compensating for the second-order dispersion of SMFs used as dispersive media. To be specific, SMFs’ second-order dispersion has been reduced to the one-sixteenth of its original value by combining with the reverse-dispersion fibers (RDFs) which can provide the second-order dispersion of the opposite sign to the SMFs. As a result, the performance improvements in the STTE-based clock recovery was demonstrated so that the 10-GHz clear optical clock pulses were successfully recovered from 10-Gbit/s return-to-zero (RZ) pseudo-random bit sequence (PRBS) optical signals.     

Effect of active oxygen species on the productivity of torularhodin by Rhodotorula glutinis No. 21

The effect of active oxygen species on the productivity of torularhodin, an effective antioxidant, by soil yeast, Rhodotorula glutinis no. 21, was examined. Methylene blue, methyviologen and AAPH [2,2'-azobis(2-amidinopropane) dihydrochloride] were used as generators of singlet oxygen, superoxide anion radicals and peroxy radicals, respectively. All of them indicated effectiveness at a dose of 1.0 x 10(-10) to 3.0 x 10(-6) M. Addition of these generators to the culture medium had almost no influence on the biosynthesis of beta-carotene, whereas it had marked enhancement on those of torulene and torularhodin. Production of uric acid by xanthineoxidase remained unchanged at a torularhodin concentration of up to 100 microM. This result suggests that torularhodin does not directly affect the productivity of superoxide anions. It has been proved that torularhodin has a more potent effect on the scavenging of peroxyl radicals and inhibits substrate degradation by singlet oxygen more effectively than beta-carotene does. Continuous addition of methylene blue enhanced the torularhodin accumulation more markedly than single addition.     

Temporal-Talbot-effect-based preprocessing for pattern-effect reduction in all-optical clock recovery using a semiconductor-optical-amplifier-based fiber ring laser

We propose and experimentally demonstrate the temporal-Talbot-effect (TTE)-based preprocessing for the pattern-effect reduction in the all-optical clock recovery using a semiconductor-optical-amplifier (SOA)-based fiber ring laser (SOA-FRL). The TTE-based preprocessing successfully reduced the pattern effects of the recovered clock pulses, so that the 10-GHz clear optical clock pulses were recovered from a 10-Gbit/s return-to-zero on–off keying (RZ-OOK) pseudo-random bit sequence (PRBS) optical signal. “Peak variation” and “Pattern-dependent intensity noise (PDIN)” were proposed and were utilized as parameters to quantitatively evaluate the pattern effects, from which recovered clock pulses suffer, in the temporal domain and the frequency domain, respectively. Peak variation was reduced from 77.2% to 36.2%, and PDIN was improved from ?103 dBc/Hz to ?110 dBc/Hz with the aid of the TTE-based preprocessing. Furthermore, we examined the tolerance of the proposed technique by intentionally deviating the input signal’s bit-rate by ±190 Mbit/s (±2% of the bit-rate) from the optimum condition for the TTE. As compared with the PDIN value for the pulse train obtained by the direct injection of the non-processed signal into the SOA-FRL, the PDIN of the recovered clock pulses using the preprocessed signal indicated improvements over the entire measurement range of ±190 Mbit/s, which corresponds to the wavelength-dispersion deviation of ±56 ps/nm (±4% of the wavelength-dispersion applied to the input signal) from the optimum value.     

Transform-limited 5.6 ps optical pulse generation at 12 GHz repetition rate from gain-switched distributed feedback laser diode by employing pulse compression technique

12 GHz chirped optical pulses from a gain-switched 1.3 ?m distributed feedback laser diode are compressed to transform-limited 5.6 ps pulses by travelling through a dispersion shifted single-mode fibre with 46 ps/nm normal dispersion. A time-bandwidth product of 0.69 and a high on/off ratio of 20 dB are obtained for optimally compressed pulses.     

Very-high-speed optical signal processing

Challenges of next-generation transmission technologies are summarized in the context of creating future terabit-per-second networks. The technologies will be realized through both the separate and combined evolution of inherent lightwave capabilities along with time-, wavelength-, and space-domain optical processing techniques. Optical signal processing techniques in the tens of gigabit per second range for future high-speed transmission systems and broadband networks are reviewed     

A highly efficient two-stage Er3+-doped optical fiberamplifier employing an optical gate to effectively reduce ASE

Highly efficient amplification of ultrashort optical pulses is demonstrated with a two-stage Er³⁺-doped optical fiber amplifier that includes an optical gate to efficiently reduce amplified spontaneous emission (ASE) generated from the first Er³⁺-doped fiber. A gain of 49 dB, an amplified peak power 0f 105 W, and 1.05 nJ pulse energy are achieved for 2-Mb/s, 10-ps pulses at a total pumping power of 90 mW from 1.48-μm LDs     

Ultrafast reflective optical Kerr demultiplexer using polarisation rotation mirror

A novel all-optical switching scheme in a reflective mode is proposed and its stable 60 Gbit/s operation at 1.307 mu m demonstrated. The scheme uses a 90 degrees polarisation rotation on reflection to compensate for birefringence phase turbulence in the Kerr media.<>