Incremental maintenance of aggregate and outerjoin expressions

Views stored in a data warehouse need to be kept current. As recomputing the views is very expensive, incremental maintenance algorithms are required. Over recent years, several incremental maintenance algorithms have been proposed. None of the proposed algorithms handle the general case of relational expressions involving aggregate and outerjoin operators efficiently.     

Determination of gas dispersion in vapor extraction of heavy oil and bitumen

In this work, a mathematical model is developed and simulated to determine gas dispersion along with solubility during the vapor extraction (Vapex) of live oil from a laboratory scale physical model. The physical model is a rectangular block of homogenous porous medium saturated with heavy oil and bitumen. At a given temperature and pressure, the block is initially exposed on its side to a solvent gas, which diffuses into the medium and gets absorbed. The absorption of gas reduces the viscosity of heavy oil and bitumen causing it to drain under gravity. The low-viscosity “live oil” is produced at the bottom of the porous block. The production of live oil with time is accompanied by the shrinkage of oil in the block as well as its increased exposure to gas from top. These phenomena of Vapex are described by the mathematical model, which is used to calculate live oil production with various values of gas solubility and dispersion. Their optimal values are determined for the vapor extraction of Cold Lake bitumen with butane by matching calculated live oil production with its experimental values published earlier.     

Optimal policies for BMA polymerization in nonisothermal batch reactor

In this paper, the optimal policies for bulk polymerization of n‐butyl methacrylate (BMA) are determined in a nonisothermal batch reactor. Four objectives are realized for BMA polymerization based on a detailed process model. The objectives are: (i) maximization of monomer conversion in a specified operation time, (ii) minimization of operation time for a specified, final monomer conversion, (iii) maximization of monomer conversion for a specified, final number average polymer molecular weight, and (iv) maximization of monomer conversion for a specified, final weight average polymer molecular weight. For each objective, the optimal temperature policy of heat‐exchange fluid inside reactor jacket is determined. The temperature of the heat‐exchange fluid is considered as a function of a specified variable. Necessary equations are provided to suitably transform the process model in terms of a specified variable other than time, and to evaluate the elements of Jacobian to help in the accurate solution of the process model. A genetic algorithm‐based optimal control method is applied to realize the objectives. The resulting optimal policies of this application reveal considerable improvements in the batch production of poly(BMA). © 2006 Wiley Periodicals, Inc. J Appl PolymSci 102: 2799–2809, 2006     

A comparison of lipids from liver and hepatoma subcellular membranes

Subcellular fractions of nuclei, mitochondria, endoplasmic reticulum, plasma membrane and cytosol were prepared from liver and hepatoma 72288CTC. Marker enzyme activities, biochemical compositions and electron microscopy were used to establish purity. Hepatoma NADH: cytochrome C reductase and 5′-nucleotidase exhibited abnormal subcellular distributions. The lipids from the subcellular fractions were examined in detail. Mitochondria and plasma membranes were characterized by elevated percentages of diphosphatidylglycrerol and sphingomyelin, respectively, in both tissues. All hepatoma subcellular fractions contained dramatically elevated levels of sphingomyelin and cholesterol, two components that form preferential strong complexes in vitro. The fatty acid composition of hepatoma sphingomyelin differed markedlg from liver and, unlike liver, did not exhibit organelle specific compositions. Some hepatoma lipid classes contained reduced percentages of palmitate while others contained higher levels. Hepatoma phosphatidylcholine and phosphatidylethanolamine from organelles contained lower percentages of long chain polyunsaturated fatty acids than liver. Generally, unique fatty acid profiles exhibited by individual phospholipid classes of liver subcellular fractions were absent or much reduced in the hepatoma. The ratios of oleate to vaccenate were near one for most of the phospholipid classes of most liver fractions, but all hepatoma classes, with few exceptions, contained a much higher percentage of oleate in all subcellular fractions. The hypothesis is proposed that the origin of some acyl moieties for the biosynthesis of various hepatome lipid classes differs from liver sources. The possible changes in acyl pools, sources and compartments for complex lipid biosynthesis could result in change in the quantities of molecular species that could contribute to the abnormal properties of the hepatoma membranes.     

An Authentication Based Approach for Prevention of Spectrum Sensing Data Falsification Attacks in Cognitive Radio Network

Wireless Personal Communications - This is the era of Intelligent Cognitive Radio Network (CRN) technology that provides the available spectrum with efficient utilization. Cognitive Radio (CR)...     

Introducing robustness in multi-objective optimization

In optimization studies including multi-objective optimization, the main focus is placed on finding the global optimum or global Pareto-optimal solutions, representing the best possible objective values. However, in practice, users may not always be interested in finding the so-called global best solutions, particularly when these solutions are quite sensitive to the variable perturbations which cannot be avoided in practice. In such cases, practitioners are interested in finding the robust solutions which are less sensitive to small perturbations in variables. Although robust optimization is dealt with in detail in single-objective evolutionary optimization studies, in this paper, we present two different robust multi-objective optimization procedures, where the emphasis is to find a robust frontier, instead of the global Pareto-optimal frontier in a problem. The first procedure is a straightforward extension of a technique used for single-objective optimization and the second procedure is a more practical approach enabling a user to set the extent of robustness desired in a problem. To demonstrate the differences between global and robust multi-objective optimization principles and the differences between the two robust optimization procedures suggested here, we develop a number of constrained and unconstrained test problems having two and three objectives and show simulation results using an evolutionary multi-objective optimization (EMO) algorithm. Finally, we also apply both robust optimization methodologies to an engineering design problem.     

Hydrogen from empty cotton boll agro-waste via thermochemical route and feasibility study of operating an IC engine in continuous mode

Hydrogen can be cited as prospective source of clean power. In this work hydrogen rich syn-gas generated from the agro-waste, empty cotton bolls was injected into an IC engine in continuous mode along with gasoline. At the air-fuel ratio of 23.40, specific fuel consumption of 0.35 kg kWh^?1, the engine could be operated with higher efficiency than with gasoline alone. A distinct reduction in emission characteristics could also be seen. Empty cotton bolls derived after removal of cotton from the flower in field, was first studied for fuel properties. The reasonably high heating value (HHV) of 17.54 MJ kg^?1 suggested that it could be a precursor to hydrogen via two stepped thermo-chemical process. The first step involved slow pyrolysis of the biomass at 500 °C for 60 min at a heating rate of 10 °C min^?1 yielding 39.71% bio-char by weight. The C, H, N, S and O contents of the produced bio-char was 59.91, 2.91, 0.72, 0.47 and 35.99% respectively and its HHV was 26.7 MJ kg^?1. Steam gasification of this bio-char, at 700 °C and water flowrate of 7 mL min^?1 exhibited maximum hydrogen yield of 67.42% (v/v) in the syn-gas mixture. Subsequent enrichment of the gas using ethanolamine/ethylene diamine and KMnO₄ solutions resulted in more than 90% (v/v) hydrogen in the combustible gas mixture and the test engine could be effectively operated.     

Fuel cells for non-automotive uses: Status and prospects

Fuel cells are in varying stages of commercialization for both automotive and non-automotive applications. The fuel cell industry has made substantial progress but still needs to reduce costs and improve performance to compete successfully with established technologies. In just 5 years, costs have been reduced by a factor of two while improving efficiency and durability. Based on interviews with fuel cell manufacturers in the U.S., Japan and the EU and information from published sources, a model of non-automotive fuel cell markets is constructed and used to estimate the impacts of government policies and to project the potential evolution of the industry to 2025. The model includes the effects of learning-by-doing, scale economies and exogenous technological progress on component and system costs, estimates customer choices between fuel cell and competing established technologies, and attempts to measure the impacts of government policies. With continued policy support it appears likely that the industry can become self-sustaining within the next decade.     

Automatic synthesis of quaternary quantum circuits

Quaternary encoded binary circuits are more compact than their binary counterpart. Although quaternary reversible circuits are realizable, design of such circuits is still in its infancy. This work proposes a new, enhanced method of quaternary Galois field sum of products (QGFSOP) synthesis for quaternary quantum circuits. To reduce QGFSOP product terms, the algorithm makes use of 11 newly defined quaternary Galois field (QGF) expansions (for a total of 21 QGF expansions). This algorithm achieves QGFSOP minimization with the assistance of a pseudo-Kronecker Galois field decision diagram (QGFDD). This is a novel approach for QGFSOP synthesis. Finally, QGFSOP expressions are translated into quantum cost optimized quaternary quantum circuits using: (1) newly developed quaternary quantum gate realizations of controlled Feynman and Toffoli gate that are optimized in terms of quantum cost, (2) use of composite literals consisting of 1 digit and M–S gates. Performance evaluation against existing works in the literature determined that our proposed method achieves an average QGFSOP expression product term savings of 32.66 %. Also, the synthesized QGFSOP circuits were evaluated in terms of quantum cost.     

Crystallization of Stoichiometric SbSI Glass

Congruent crystallization of antimony sulphoiodide (SbSI) glass of stoichiometric composition, which is prepared successfully for the first time using rapid melt‐quenching, has been investigated using differential scanning calorimetry (DSC). The results for glass powder show a glass transition at 127°C and two separate exothermal peaks with maxima around 140°C and 190°C. The ratio of the intensities of the exothermal peak at ~190°C to the peak at ~140°C increases as the particle size and heating rate are increased, but their total enthalpy remains constant at 62 ± 2 J/g for all DSC runs. Surface heating of the glass induced by a 520 nm CW laser shows two contracted regions: needle‐like crystalline formations at low temperature and bulk crystallization at high temperature. The observed phenomena and DSC results suggest two different kinds of crystallization of the SbSI phase: one‐dimensional crystallization at low temperature which starts from the sample surface and three‐dimensional bulk crystallization that continues the transformation to crystalline state at higher temperatures. The origin of the two different crystallizations can be traced to the strong anisotropy of the SbSI crystal structure due to the weak van der Waals interaction between covalent‐ionic chains (Sb₂S₂I₂)_n.