Improved visible-light responsive photocatalytic activity of N and Si co-doped titanias

Thermal reaction of titanium tetraisopropoxide and tetraethyl orthosilicate in 1,4-butanediol afforded nanocrystalline silica-modified titanias having large surface area and superior thermal stability. In this study, the thus-obtained silica-modified titanias were treated in an NH₃ flow at high temperatures, and their physical and photocatalytic properties were investigated. Compared with NH₃-treated TiO₂ without silica modification, the NH₃-treated silica-modified titanias showed a stronger absorption in the visible region (400–500 nm) and had a larger peak at 396 eV in the N 1s XPS spectrum. These results indicate that a larger amount of nitrogen was stably doped in the silica-modified titania. The obtained products exhibited a high photocatalytic activity for degradation of Rhodamine B and decomposition of acetaldehyde under visible light irradiation. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Diffusion Bonded EDM Electrode with Micro Holes for Jetting Dielectric Liquid

This paper describes improvement of machining characteristics of electrical discharge machining of deep slots using a tool electrode which has micro holes for jetting dielectric liquid over the working surface. The tool electrode was made by the diffusion bonding of two copper plates, over an interface on which micro grooves for jetting the dielectric fluid were formed using electrolyte jet machining. In conventional machining, it is difficult to drill micro holes at the end of a slim electrode and circulate the dielectric fluid from the other end. Hence a solid tool electrode is used and periodically lifted up during machining to flush debris particles out of the discharge gap. Use of the newly developed tool electrode was found to shorten the processing time and improve machining accuracy significantly compared with the conventional solid tool electrode. Since the holes are micro, the outlet shapes are not replicated onto the bottom surface of the slot machined.     

Continual conversion of free fatty acid in rice bran oil to triacylglycerol by immobilized lipase

Rice bran oil containing 30–50% free fatty acid was continually converted to an oil containing more than 75% of triacylglycerol (TG) by means of immobilized lipase. The reaction was carried out at 60°C for 24 h with dehydration and reactant mixing by dry nitrogen flow under a positive nitrogen atmosphere. Enzymatic TG synthesis with evaporation by heating was not suitable because of the increasing peroxide value of the oil. Part of this article was presented at the annual meeting of the Japan Oil Chemists' Society at Sendai, Japan, October, 16, 1990.     

Aging and availability of binocular disparity and pictorial depth cues in 3D graphics contents

Some stereoblind observers do not perceive depth of 3D stimuli that depends on binocular disparity. These individuals, who have no disabilities, comprise over 5% of the general population. In addition, 17–30% of nonstereoblind young and young–middle people do not use disparity information in certain 3D environments, a phenomenon known as pseudo‐stereoblindness. This study aimed to investigate the relationship between aging and the proportion of pseudo‐stereoblindness in the general population. In an experiment, 134 nonstereoblind participants, ranging in age from 17 to 83 years, judged subjective depth of 3D stimuli containing binocular disparity and pictorial depth cues. Results showed that the proportion of pseudo‐stereoblindness among young (17–24 years old) and young–middle aged observers (25–39 years old) was 29%, in both cases. However, the proportion of pseudo‐stereoblind observers increased in older populations: 65% and 82% in the middle (40–54 years old) and senior (55–83 years old) age groups, respectively. These results suggest that a number of people, especially in elderly populations, have trouble perceiving depth from binocular disparity in 3D graphic contents despite their essential ability to use disparity information.     

Characterization of the Advanced Satellite for Cosmology and Astrophysics x-ray telescope: preflight calibration and ray tracing

The x-ray properties of multinested thin-foil mirror x-ray telescopes (XRT's) on board ASCA, the Advanced Satellite for Cosmology and Astrophysics, were fully evaluated with an x-ray pencil beam.Scanning over the telescope aperture of 35 cm in diameter with an x-ray pencil beam, we found the effective area of a set of XRT's to be 325, 200, and 113 cm(2) at energies of 1.5, 4.5, and 8.0 keV, respectively. We derive the point-spread functions (PSF's) of the XRT's by measuring the image profile at the focal plane with an x-ray CCD. The PSF is found to exhibit a sharp core concentrated within 30 arcsec and a broad wing extended to 3 arcmin in half-power diameter. We also evaluate the contribution of stray light, which is caused by the single reflection of x rays by primary or secondary mirrors and by the backside reflection of the mirrors. To obtain the characteristics of the XRT in the energy region of 0.5-10.0 keV, incorporated with the measurements at discrete energies, we develop a ray-tracing method with the telescope design parameter, the PSF, and optical constants. In particular, we obtain the optical constants around the gold-atom M shell (Au-M) absorption-edge energies by measuring the reflectivity of our mirror sample, with monochromatized x-rays in the energy range of 2.0-3.5 keV from synchrotron radiation. Taking into account the PSF's and optical constants, we find that our ray-tracing program can reproduce all these XRT performances.     

A scalable interest-oriented peer-to-peer pub/sub network

There has been a big challenge in structured peer-to-peer overlay network research area. Generally, a structured overlay network involves nodes evenly or based on their resource availabilities, and gathers nodes?? resources to achieve some bigger tasks. The challenge here is to gather resources based on nodes?? interests, and only interested nodes are involved in a certain task. Toward this challenge, we propose a new scheme to a peer-to-peer publish/subscribe network. Publish/subscribe represents a new paradigm for distributed content delivery. It provides an alternative to address-based communication due to its ability to decouple communication between the source and the destination. We propose a Bloom filter based mapping scheme to map IDs to nodes?? interests in addition to new interest proximity metric to forward events and to build nodes?? routing tables. We also propose a new approach called ??shared interest approach?? for network discovery. To evaluate the algorithms proposed in this work, we conducted simulations in both static and dynamic settings, and found a low false positive rate. We also discuss about a well-known application called Twitter, and show how our scheme would work in a real environment.     

Fabrication of piezoelectric multilayer thin-film actuators

In this study, we fabricated multilayer ceramics (MLCs) composed of multilayered Pb(Zr,Ti)O₃ (PZT) piezoelectric thin films with internal electrodes and evaluated their dielectric and piezoelectric properties. The stack of PZT ferroelectric layers (550 nm) and SrRuO₃ (SRO, 80 nm) electrodes were alternatively deposited on Pt/Ti-coated silicon-on-insulator substrates by radio-frequency magnetron sputtering. The MLCs composed of one, three, and five PZT layers were fabricated by the alternate sputtering deposition of PZT ferroelectric layers and SRO electrodes through the movable shadow mask. The capacitances of MLCs were proportionally increased with the number of PZT layers, while their relative dielectric constants were almost same among the each MLC. The MLCs exhibited symmetric and saturated P–E hysteresis loops similar to the conventional PZT thin films. We estimated that the piezoelectric properties of MLCs by FEM simulation, and confirmed that the effective transverse piezoelectric coefficients (d _31,eff ) increased with the number of PZT layers. The piezoelectric coefficients calculated to be d _31,eff  = ?2964 pC/N at 25 PZT layers, which is much higher than those of conventional single-layer piezoelectric thin films.