Impact of Serum Chemerin Levels on Liver Functional Reserves and Platelet Counts in Patients with Hepatocellular Carcinoma

Obesity-related metabolic abnormalities, including adipokine imbalance and chronic inflammation, are involved in liver carcinogenesis. Chemerin, a novel adipokine, plays a critical role in adipogenesis, energy metabolism, and inflammation. We evaluated the impact of serum chemerin levels on liver functional reserves in hepatocellular carcinoma (HCC) patients and on the recurrence and prognosis of HCC. This study included 44 patients with any stage of HCC who underwent curative treatment at Gifu Municipal Hospital (Gifu, Japan) between 2006 and 2007. Recurrence-free survival and overall survival were estimated using the Kaplan-Meier method. Serum albumin levels (Pearson’s correlation coefficient; r = 0.3110, p = 0.0399), platelet counts (r = 0.4159, p = 0.0050), and prothrombin times (r = 0.3775, p = 0.0115) were significantly correlated with serum chemerin levels in patients with HCC, and they were inversely correlated with Child-Pugh scores (r = −0.3732, p = 0.0126), serum alanine aminotransferase levels (r = −0.3864, p = 0.0105), and total bilirubin levels (r = −0.4023, p = 0.0068). Among these variables, a multiple comparison test identified that platelet counts and total bilirubin levels were associated with serum chemerin levels (p < 0.0083). No significant correlation was found between serum chemerin levels and recurrence-free survival (p = 0.3691) or overall survival (p = 0.7916). In HCC patients, serum chemerin concentrations were correlated with liver functional reserves and platelet counts, but not with recurrence or prognosis.     

Effect of Contact Stiffness on Creep-Groan Occurrence on a Simple Caliper-Slider Experimental Model

In this paper, a fundamental mechanism for creep-groan generation is investigated by adopting a simple yet effective caliper-slider experimental model. Contact condition, which is a function of three parameters, namely normal force, contact roughness, and material combination, is connected with the creep-groan phenomenon in terms of contact stiffness. Creep-groan generation is determined by analyzing the frequency characteristic of the generated vibration acceleration when the sliding commences due to a simultaneous application and release of force in the tangential and normal directions, respectively. As per the obtained results, creep-groan occurrence or absence in the employed experimental model may be classified into three regions based upon the value of the contact stiffness, i.e., occurrence, non-occurrence, and mixed regions. The results also indicate that creep-groan occurrence in this caliper-slider experimental model can be avoided by controlling the value of contact stiffness in an effective manner.     

Performance evaluation of membrane on catalyst module for hydrogen production from natural gas

We have been developing a hydrogen production module with a Pd-based membrane on catalyst (MOC) from natural gas. The MOC module is expected to be more compact and cheaper than the conventional hydrogen production module. To evaluate the hydrogen production performance of the MOC module and to clear the factor that dominates the effective hydrogen production, we compared the reforming performance of the catalytic support without hydrogen permeable membrane and the MOC module at various reaction conditions. As a result, it was cleared that hydrogen permeation through the membrane improves the methane conversion drastically in the MOC module by comparing with the support only module and changing the experimental conditions.     

Role of ComFA in controlling the DNA uptake rate during transformation of competent Bacillus subtilis

The roles of ComFA and ComEC in DNA uptake by competent Bacillus subtilis were analyzed by transformation with DNA in protoplast lysates (LP transformation). Deletion mutants of comFA and comEC and putative Walker A mutants (K152N, K152Q, K152E) of comFA were constructed by fusion polymerase chain reaction. Transformants of comEC mutant with purified DNA and DNA in protoplast lysate were not obtained, which shows a lack of transformation ability and backwards recombination of the mutant. Transformants of the comFA mutant were obtained by LP transformation (1.8 × 10(4) transformants/μg DNA). Low relative efficiency of transformation (RET) of comFA compared to wild type (4.3 × 10(-4)) showed an important role for comFA in DNA uptake. Walker A mutants showed 1.8-19 × 10(-4) RET, suggesting a dependence on ATPase activity for transformation. Co-transformation between short linkages was only detected in comFA mutants. The results demonstrated that ComFA controlled the DNA uptake rate. The interpretation was further supported by analyzing the plasmid used in LP transformation of the comFA mutant. The RET of comFA compared to the wild type was 2.7 × 10(-2), 60-fold higher than that with chromosomal DNA (4.3 × 10(-4)). Following addition of DNA into comFA culture, transformants were obtained after 15 min, with the number of transformants increasing over time. The kinetics strongly suggested that in comFA mutants, formation of another DNA uptake complex without ComFA would be a lengthy process.     

Enhanced antiviral activity of soybean β-conglycinin-derived peptides by acylation with saturated fatty acids

Abstract: Peptide mixtures prepared from soybean β‐conglycinin (7S‐peptides) were acylated with saturated fatty acids of different chain length (6C‐18C) in order to improve their antiviral activity against Feline calicivirus (FCV) strain F9 which is a typical norovirus surrogate. Among the fatty acids varieties, it was revealed that 7S‐peptides acylated with myristic and palmitic acids potently inhibited FCV replication. Myristorylation and palmitoylation of 7S‐peptides kept host cells viability at 91.51% and 98.90%, respectively. The infectivity of FCV on Crandell–Reese feline kidney cells was further determined after exposure of initial titer of 10^6.47 TCID₅₀/mL. Myristoylated and palmitoylated 7S‐peptides significantly (P < 0.006) reduced FCV infectivity as compared to native 7S‐peptides. Native 7S‐peptides showed 25% FCV inhibitory activity while myristoylated and palmitoylated 7S‐peptides exhibited 98.59% and 99.98% reduction in FCV infectivity, respectively. Myristoylated and palmitoylated 7S‐peptides demonstrated higher anti‐FCV activity in a wide range of concentration with complete reduction at 25 μg/mL. Surface hydrophobicity was significantly (P < 0.05) increased after attachment of long hydrocarbon fatty acids to 7S‐peptides as supported by changes in fluorescence intensity. Enzymatic hydrolysis together with acylation will give an insight into surface and physiological functional lipopeptides derived from soy β‐conglycinin.     

Suppression by carotenoids of microtenoids of microcystin-induced morphological changes in mouse hepatocytes

Microcystin-LR is a liver tumor promoter in the okadaic acid class, a group of potent inhibitors of protein phosphatases 1 and 2A. Because of inhibition of protein phosphatases, microcystin-LR induces hyperphosphorylation of cellular proteins, including cytoskeletal proteins—cytokeratins 8 and 18—and causes morphological changes in mouse hepatocytes in primary culture. We studied the effects of carotenoids to antagonize microcystin-LR-induced morphological changes in hepatocytes. β-Carotene (100 nM to 100 μM), suppressed the morphological changes induced by 100 nM microcystin-LR in a dose-dependent manner. Other carotenoids tested exerted similar suppressive effects, although retinoids, such as all-trans retinol, all-trans retinoic acid, and 9-cis retinoic acid, were only weakly suppressive. The relative potency of the suppression correlated significantly with the number of conjugated double bonds in thetrans configuration. β-Carotene strongly suppressed the hyperphosphorylation of cellular proteins induced by microcystin-LR without significant changes in the basal phosphorylation level. Other antioxidants, such as α-tocopherol, did not protect the cells against microcystin-LR. Taken together, the antagonistic effects of carotenoids against microcystin-LR are difficult to explain by their antioxidant or provitamin A activities. Suppression of the hyperphosphorylation of cellular proteins may be a novel mechanism by which carotenoids inhibit tumor promotion.     

Aging and thermal stability of Mg/SiC and Mg/Y2O3 reflection multilayers in the 25-35 nm region

Reflection measurements in the 25-35 nm region were made for Mg/SiC and Mg/Y2O3 multilayers kept in a low-humidity atmosphere for 4 or 5 years. Aged Mg/SiC multilayers keep their reflectances, and the reflectance value at 31.2 nm is 0.44 at 10 degrees of the normal angle of incidence. Aged Mg/Y2O3 multilayers change reflectance as top layer materials, and the best value at 30.1 nm is 0.40 at 10 degrees. Reflection measurements are also made for Mg-based multilayers that are annealed from room temperature to 400 degrees C at 50 degrees C intervals. Both multilayers keep their reflectance at annealing temperatures of 200 degrees C. These results suggest that both Mg-based multilayers can be applied to practical optics.     

Prediction of cutting forces and machining error in ball end milling of curved surfaces -II experimental verification

This paper presents the results of a series of experiments performed to examine the validity of a theoretical model for evaluation of cutting forces and machining error in ball end milling of curved surfaces. The experiments are carried out at various cutting conditions, for both contouring and ramping of convex and concave surfaces. A high precision machining center is used in the cutting tests. In contouring, the machining error is measured with an electric micrometer, while in ramping it is measured on a 3-coordinate measuring machine. The results show that in contouring, the cutting force component that influences the machining error decreases with an increase in milling position angle, while in ramping, the two force components that influence the machining error are hardly affected by the milling position angle. Moreover, in contouring, high machining accuracy is achieved in “Up cross-feed, Up cut” and “Down cross-feed, Down cut” modes, while in ramping, high machining accuracy is achieved in “Left cross-feed, Downward cut” and “Right cross-feed, Upward cut” modes. The theoretical and experimental results show reasonably good agreement.     

DNA taken into Bacillus subtilis competent cells by lysed-protoplast transformation is not ssDNA but dsDNA

Competent Bacillus subtilis incorporates whole-genome DNA (4215 kb) from the protoplast lysate of B. subtilis subtilis [Akamatsu, T. and Taguchi, H., Biosci. Biotechnol. Biochem., 65, 823-829 (2001)]. A continuous incorporated DNA is longer than 1500 kb [J. Biosci. Bioeng., 101, 257-262 (2006)]. Whether the incorporated DNA is single-stranded (ssDNA) or double-stranded DNA (dsDNA) has been studied by examining the transforming activity of the incorporated DNA. B. subtilis BEST7027 was used as the donor strain, which has a heterologous region consisting of the 145 kb region of the Synechocystis sp. PCC6803 genome and erm gene. The donor DNA was transferred to a wild-type or a recA recipient strain (AYG2 or SYN9), and protoplast lysate was prepared from the transformants and used as the donor DNA source for the second recipient strain (AU1 or AV1). The intergenote region showed a significant transforming activity. When DNase I was added to both cells collected from the first transformation mixture and the following protoplastization, the result was similar to that obtained without DNase I. All of the observations strongly suggest that the incorporated DNA is dsDNA, and the transformation of competent B. subtilis by DNA in protoplast lysate is different from that by purified DNA taken up conventionally.