Synthesis and characterization of hydroxyl terminated poly(butadiene)-g-poly(glycidyl azide) copolymer as a new energetic propellant binder

Summary Poly(glycidyl azide), PGA, was grafted onto Hydroxyl Terminated Poly(butadiene), HTPB, via free radical mechanism. PGA-macro azoinitator and HTPB polymer mixture was casted from solution and the polymer film was kept at 90°C for 4 hours. The grafted polymer was isolated from the product by fractional precipitation and characterized by NMR and FT-IR spectroscopy. Graft copolymer structure was also confirmed that volume ratio of nonsolvent to the solution of the graft copolymer was between those of corresponding homopolymers. TGA traces of the block polymers were containing two different maxima at 253°C (for PGA units) and 469°C (for HTPB units). Because of the incompatibility of the blocks, DSC curve showed two T_g's which belong to the related segments.     

Turbulence damping above the cloud height in suspensions of concentrated slurries in stirred tanks

Poor mixing in the clear liquid layer above the cloud height has been reported by several authors. This study uses LDV measurements to quantify turbulence above the cloud using a liquid level of 1.5 T to remove the barrier of a free surface at H = T. A D = T/3, down-pumping PBT was used at an off-bottom clearance of C = T/3. Three slurries were tested at impeller speeds 0.8, 1, and 1.2N_js. The change in turbulence was quantified using the normalized root mean square (RMS) of the fluctuating velocity summed and averaged over each radial traverse. A significant difference between the fluctuating values of the cloud height—minimum, average, and maximum—was observed. The turbulence decays until the maximum cloud height. Beyond that, it remains constant and near zero. The effects of both particle size and solids concentration prove to be important.     

Changes in the texture,physicochemical properties and volatile compound profiles of fresh Kashar cheese (<90 days) during ripening

In this study, four different fresh Kashar cheese samples were ripened for 90 days. The physicochemical properties, texture attributes, fatty acid composition and volatile compound profiles of the samples were measured every 30 days of ripening. The texture properties of the cheese samples were significantly affected by the duration of the ripening period. The results of this study highlighted that texture parameters as a function of ripening period should be considered for both fresh and aged Kashar cheeses to determine the ripening period as they are very important for consumer acceptability and consumption of the end product.     

Electrochemical performance and modeling of lithium‐sulfur batteries with varying carbon to sulfur ratios

Lithium‐sulfur batteries have attracted much research interest because of their high theoretical energy density and low‐cost raw materials. While the electrodes are composed of readily available materials, the processes that occur within the cell are complex, and the electrochemical performance of these batteries is very sensitive to a number of cell processing parameters. Herein, a simple electrochemical model will be used to predict, with quantitative agreement, the electrochemical properties of lithium‐sulfur cathodes with varying carbon to sulfur ratios. The discharge capacity and the polarization were very similar for the lowest sulfur loadings, while above 23.2 wt% sulfur the gravimetric capacity dropped significantly, and there was an increase in the cell polarization. In addition, a transition in the electrode morphology, from well dispersed to aggregated sulfur at the surface, will be reflected in the change in a critical model parameter demonstrating the sensitivity and functionality of even this simple model in predicting complex behavior in the lithium‐sulfur cells.     

A Study on Glutaric Acid Extraction by Tridodecylamine: Equilibria and Models

The extraction of glutaric acid was studied using tridodecyl amine (TDA) with respect to the functional groups of the diluent. The diluents studied were 1‐octanol (alcohol), methyl isobuthyl ketone, MIBK (ketone), and toluene (aromatic hydrocarbon) and these were used to dilute the TDA. The experimental results of batch extraction experiments are reported as distribution coefficients, D_C, loading factors, Z, and extraction efficiency, E. All measurements were carried out at 298.15 K. The results of the liquid‐liquid equilibrium measurements are correlated by a linear solvation energy relationship (LSER) model that takes into account physical interactions and modified Freundlich and Langmuir equations. The experimental results are compared with model results.     

Free radical crosslinking of unsaturated bacterial polyesters obtained from soybean oily acids

Summary Poly(-3-hydroxy alkanoate) containing unsaturated side chains, PHA-soybean, were produced by feeding Pseudomonas oleovorans with soybean oily acids obtained from soybean oil. Unsaturation of PHA-soybean were found to be 10 mol-% of unsaturated side chains. Main saturated part of the biopolymer was Poly(3-hydroxy octanoate) with minor hexanoate and decanoate units. PHA films were crosslinked via free radical mechanism by means of thermally or under UV irradiation in the presence of benzoyl peroxide, benzophenon, and /or ethylene glycol dimethacrylate (EGDM). Crosslinking yield of the PHA films were found to be from 81 to 93 wt.-% from the sol-gel analysis. Swelling properties of the crosslinked PHA films in chloroform and toluene were also studied. Mc values of crosslinked PHAs were also calculated using Flory-Rehner equation. The crosslinked biopolyester obtained by thermally at 60 °C with benzoyl peroxide indicated the highest crosslinking density. Glass transition temperatures (Tg) of crosslinked biopolyester samples were changed from −33 to −45 °C while that of PHA-soybean was −60 °C. Received: 16 June 2000/Revised version: 22 January 2001/Accepted: 20 May 2001     

Effective factors improving catalyst layers of PEM fuel cell

Cathode catalyst layer has an important role on water management across the membrane electrode assembly (MEA). Effect of Pt percentage in commercial catalyst and Pt loading from the viewpoint of activity and water management on performance was investigated. Physical and electrochemical characteristics of conventional and hydrophobic catalyst layers were compared. Performance results revealed that power density of conventional catalyst layers (CLs) increased from 0.28 to 0.64 W/cm² at 0.45 V with the increase in Pt amount in commercial catalyst from 20% to 70% Pt/C for H₂/Air feed. In the case of H₂/O₂ feed, power density of CLs increased from 0.64 to 1.29 W/cm² at 0.45 V for conventional catalyst layers prepared with Tanaka. Increasing Pt load from 0.4 to 1.2 mg/cm², improved kinetic activity at low current density region in both feeding conditions. Scattering electron microscopy (SEM) images revealed that thickness of the catalyst layers (CLs) increases by increasing Pt load. Electrochemical impedance spectroscopy (EIS) results revealed that thinner CLs have lower charge transfer resistance than thicker CLs. Inclusion of 30 wt % Polytetrafluoroethylene (PTFE) nanoparticles in catalyst ink enhanced cell performance for the electrodes manufactured with 20% Pt/C at higher current densities. However, in the case of 70% Pt/C, performance enhancement was not observed. Cyclic voltammetry (CV) results revealed that 20% Pt/C had higher (77 m²/g) electrochemical surface area (ESA) than 70% Pt/C (65 m²/g). In terms of hydrophobic powders, ESA of 30PTFE prepared with 70% Pt/C was higher than 30PTFE prepared with 20 %Pt/C. X-Ray Diffractometer (XRD) results showed that diameter of Pt particles of 20% Pt/C was 2.5 nm, whereas, it was 3.5 nm for 70% Pt/C, which confirms CV results. Nitrogen physisorption results revealed that primary pores of hydrophobic catalyst powder prepared with 70% Pt/C was almost filled (99%) with Nafion and PTFE.     

Far field radiation from an arbitrarily oriented Hertzian dipole in the presence of a layered anisotropic medium

Far field radiation from an arbitrarily oriented Hertzian dipole for two-layered uniaxially anisotropic medium with a tilted optic axis is treated analytically by using the dyadic Green's function of the problem when the dipole is placed over or embedded in a two-layered uniaxially anisotropic medium. The radiation fields are evaluated using the steepest descent method. Parameter studies including anisotropy, layer thickness and dipole location are performed to investigate the effects of changing different variables on the radiation fields. Results of this work can be applied in microstrip circuits and antennas.     

Use of ultrasonic energy in reactive dyeing of cellulosic fabrics

The use of ultrasonic energy in dyeing cotton fabrics with monochlorotriazine and vinylsulphone reactive dyes has been studied spectrophotometrically. The dyeings carried out conventionally and by the use of ultrasonic techniques were compared in terms of percentage exhaustion, total amount of dye transferred to the washing bath after dyeing, fastness properties and colour values of the dyed materials. Overall results have shown that the use of ultrasound in reactive dyeing of cellulosic fabrics can result in energy savings, less water consumption, increased depth of colour and better process conditions.