Role of additives in fabrication of soy-based rigid polyurethane foam for structural and thermal insulation applications

Environmental concerns continue to pose the challenge to replace petroleum-based products with renewable ones completely or at least partially while maintaining comparable properties. Herein, rigid polyurethane (PU) foams were prepared using soy-based polyol for structural and thermal insulation applications. Cell size, density, thermal resistivity, and compression force deflection (CFD) values were evaluated and compared with that of petroleum-based PU foam Baydur 683. The roles of different additives, that is, catalyst, blowing agent, surfactants, and different functionalities of polyol on the properties of fabricated foam were also investigated. For this study, dibutyltin dilaurate was employed as catalyst and water as environment friendly blowing agent. Their competitive effect on density and cell size of the PU foams were evaluated. Five different silicone-based surfactants were employed to study the effect of surface tension on cell size of foam. It was also found that 5 g of surfactant per 100 g of polyol produced a foam with minimum surface tension and highest thermal resistivity (R value: 26.11 m²·K/W). However, CFD values were compromised for higher surfactant loading. Additionally, blending of 5 g of higher functionality soy-based polyol improved the CFD values to 328.19 kPa, which was comparable to that of petroleum-based foam Baydur 683.     

Microcomputer Control of a Residential Photovoltaic Power Conditioning System

Microcomputer-based control of a residential photovoltaic power conditioning system is described. The microcomputer is responsible for array current feedback control, maximum power tracking control, array safe zone steering control, phase-locked reference wave synthesis, sequencing control, and some diagnostics. The control functions are implemented using Intel 8751 single-chip microcomputer-based hardware and software. The controller has been tested in the laboratory with the prototype power conditioner and shows excellent performance.     

A Tutorial on GrÖbner Bases With Applications in Signals and Systems

This paper is a tutorial on GrÖbner bases and a survey on the applications of GrÖbner bases in the broad field of signals and systems. A reasonably detailed review is given of several fundamental theoretical issues that occur in the use of GrÖbner bases in multidimensional signals and systems applications. These topics include the primeness of multivariate polynomial matrices, multivariate unimodular polynomial matrix completion, and prime factorization of multivariate polynomial matrices. A brief review is also presented on the wide-ranging applications of GrÖbner bases in multidimensional as well as one-dimensional circuits, networks, control, coding, signals, and systems and other related areas like robotics and applied mechanics. The impact and scope of GrÖbner bases in signals and systems are highlighted with respect to what has already been accomplished as a stepping stone to expanding future research.      

Properties determining choice of mother wavelet

Properties of wavelets with finite as well as infinite support are summarised to facilitate mother wavelet selection in a chosen application. The quantitative guidelines reduce dependence on trial-and-error schemes resorted to for selection and underscore the importance of such selection in any application of interest. In wavelet-based image sequence superresolution, studied during the last four years, the use of a B-spline mother wavelet is justified.     

Microstructural and textural characterization of a hot-rolled IF steel

The present paper reports the experimental results on the microstructural and textural characterization of a hot-rolled IF steel. The IF steel was hot-rolled in multiple passes in the austenitic field (1,070 °C) followed by air-cooling. SEM, TEM, and LOM were used to image the microstructure of the material. The global texture was determined by X-ray diffraction (XRD) technique. The mesotexture of selected regions was investigated by electron backscatter diffraction (EBSD). Results show the presence of a diffuse (nearly random) and weak texture in the hot-band that consists of recrystallized polygonal grains and subgrains. The fraction of boundaries with misorientations comprised in the interval 2° ≤ ψ < 15° was found to be lower than 5%. It can be concluded that these low angle boundaries and the presence of subgrains can be associated to the existence of a few areas softened by recovery during or after hot rolling in austenitic field.     

Product mix determination in the presence of alternate process plans and stochastic demand

The product mix problem in the presence of alternate process plans under uncertain demand is formulated as a non-linear programming model. A heuristic solution procedure based on lagrangean relaxation technique is also presented.