Establishment time of liquid flow in a bath agitated by bottom gas injection

The establishment time of gas-liquid two-phase flows in a cylindrical bath agitated by bottom gas injection through a central single-hole bottom nozzle was investigated. Because the turbulence intensity in the bath was comparable to or larger than the unity, the conventional definition of the flow establishment time based on the history of mean velocity was not suitable for the present case. In fact, it was difficult to determine the flow establishment time based on the well-known 90 or 99 pct criterion for the mean velocity. Accordingly, two methods of determining the flow establishment time by focusing on the turbulence components instead of the mean velocity components were proposed. Velocity measurements were made with a two-channel laser Doppler velocimeter. The flow establishment time was correlated as a function of gas flow rate. Close agreement was obtained by the two methods.     

Changes in Aging Behavior and Defect Structure of Yttria-Fully-Stabilized ZrO2 with Sc2O3 Doping

Methods of suppressing decreased conductivity in 8 mol% Y₂O₃-stabilized–92 mol% ZrO₂ (8YSZ) with aging were investigated. Different amounts of Sc₂O₃ were doped into 8YSZ. The electrochemical properties of Sc₂O₃-doped 8YSZ were measured, and the microstructural and local structural changes were characterized. The present results indicate that an appropriate amount of Sc₂O₃ doping, 3 or 4 mol%, effectively suppresses decreased conductivity with aging in 8YSZ.     

Fabrication of damascene Cu wirings using solid acidic catalyst

The copper damascene process is one of the most promising technologies for fabricating Cu wirings for electronic devices such as LSIs. In this research, the fabrication of damascene Cu wirings was conducted using solid acidic catalyst. When a Cu-plated wafer, whose oxide is a basic oxide is dipped into a mixture of oxidizing solution and acidic solution, surface atoms are ionized and etched off into the solution. However, because conventional nonelectrolytic etching does not have a reference surface, it is difficult to utilize for planarization. Therefore, a new nonelectrolytic machining method using a cation-exchange fabric instead of an acidic solution was developed. To be more precise, the planarization of a Cu-plated wafer was carried out by rubbing with the cation-exchange fabric in ozone water. Basically, this method exploits chemical reactions so that the physical properties of the workpiece surface are not deteriorated. Furthermore, this method uses no chemicals except for ozone water, which easily dissociates into water and oxygen molecules; thus, this method is a low-cost, environmentally friendly process. In this paper, as a preliminary experiment, the nonelectrolytic etching of a Cu sample using solutions of O₃ and CO₂ was carried out to inspect the dependence of the etching rate on [O₃] and [H⁺]. The results indicate that the etching rate increased as [O₃] and [H⁺] increased. When [H⁺] was high relative to [O₃], a smooth etch-pit-free surface was achieved. Next, nonelectrolytic etching using a cation-exchange fabric was carried out, and properties similar to those in the case of etching using solutions were obtained. Finally, damascene Cu wirings were fabricated using ozone water and a cation-exchange catalyst.     

氮化硅基陶瓷连接技术的研究进展

陶瓷连接技术是结构陶瓷实用化的有效手段，焊料成分对连接体的性能具有决定性作用。本文主要从焊料成分选择的角度，总结了氮化硅基陶瓷连接技术的发展现状；并重点讨论了陶瓷／玻璃复合焊料在β-Sialon陶瓷连接中的应用。     

Protective effect of phytic acid hydrolysis products on iron-induced lipid peroxidation of liposomal membranes

Beneficial effects of dietary phytic acid (myo-inositol hexaphosphate; IP₆) have often been explained by its strong iron ion-chelating ability, which possibly suppresses iron ion-induced oxidative damage in the gastrointestinal tract. Because phytic acid is hydrolyzed during digestion, this work aimed to know whether its hydrolysis products (IP_2′ IP_3′, IP_4′ and IP₅) could still prevent iron ion-induced lipid peroxidation. Studies using liposomal membranes demonstrated that hydrolysis products containing three or more phosphate groups are able to inhibit iron ion-induced lipid peroxidation although their effectiveness decreased with dephosphorylation. Similarly, they also prevented iron ion-induced decomposition of phosphatidylcholine hydroperoxide. These results demonstrate that intermediate products of phytic acid hydrolysis still possess iron ion-chelating ability, and thus they can probably prevent iron ion-induced lipid peroxidation in biological systems.     

Crystalline complex between poly(γ-methyl l-glutamate) and dimethyl phthalate

The crystalline complex between poly(γ-methyl l-glutamate) (PMLG) and dimethyl phthalate (DMP) has been formed in films cast from a solution in dichloroethane. It has the stoichiometry of 1 mol of DMP to three or four residues of PMLG and shows two definite characteristics in X-ray diffraction patterns; one is the large hexagonal unit cell with the edge of around 28 Å and another the ‘extra’ 5.07 Å meridional reflection which can not be interpreted by a PMLG α-helical conformation. The structural examination for the films with various DMP contents is carried out by X-ray, viscoelastic, and d.s.c. measurements and the following structure is proposed for the crystalline complex. Four PMLG are associated to form a group which is hexagonally packed and DMP molecules, located in the gaps between groups, form a specific favourable helical structure along PMLG chains in which the van der Waals stacking of benzene rings of DMP is significant.     

Reduction of fatty acid hydroperoxides by human parotid saliva

Arachidonic acid hydroperoxide (15-hydroperoxyeicosatetraenoic acid; 15-HPETE) was introduced into human parotid saliva and incubated at 37°C. Straight phase high-performance liquid chromatography analysis of the reaction mixture showed that 15-HPETE was detoxified to its reduced form, 15-hydroxyeicosatetraenoic acid, in the presence of glutathione. Therefore, it is concluded that human parotid saliva possesses fatty acid hydroperoxide-reducing ability. However, its effectiveness was found to be lower than that of blood plasma.     

Response to walnut olfactory and visual cues by the parasitic wasp Diachasmimorpha juglandis

Diachasmimorpha juglandis is a specialist parasitoid attacking fly larvae in the genus Rhagoletis that feed exclusively on walnut fruit husks. In a free-foraging assay comparing response to uninfested, infested, and mechanically damaged fruits, we first determined that D. juglandis use host feeding damage on the fruit as a cue for host presence. In another free-foraging assay that used artificial walnut models and wind tunnel experiments, D. juglandis distinguished infested from uninfested fruits by using either olfactory or visual cues separately. However, the response rate of wasps in the wind tunnel was raised considerably when visual cues were also available. We analyzed the volatile compounds emitted by cohorts of uninfested, mechanically damaged, and infested fruits 1, 3, 5, 8, and 10 days after oviposition by flies into the infested fruits. Total volatile emissions did not differ significantly among treatments, but quantitative changes in volatiles distinguished infested fruits from uninfested and damaged fruits. The fact that parasitoids did not distinguish between infested and damaged fruits in assays where damage was visible indicates that they rely on visual cues when those are available.     

Topology optimization for fluid–thermal interaction problems under constant input power

This paper deals with density-based topology optimization considering fluid and thermal interactions, in which the Navier–Stokes and heat transport equations are coupled. We particularly focus on designing heat exchangers. In the engineering context, heat exchangers are designed while considering a certain amount of input power. Therefore it is important to maximize the performance of a heat exchanger under a constant input power. In this paper we propose a way to control the input power by introducing an extra integral equation. To be more precise, in the fluid analysis, the inlet pressure is determined by solving the extra integral equation together with the Navier–Stokes equation. By doing this we can keep the inlet power constant even when the flow channels are changed in the optimization process. Consequently, the system of equations of the fluid field takes an integrodifferential form. On the other hand, in the heat transport analysis, a single governing equation is defined for simultaneously modeling both the solid and fluid parts. The design variable is a fluid fraction whose distribution represents the topology of the solid and fluid domains. When designing heat exchangers, two different heat conditions are considered in the formulation of the optimization problems, namely temperature-dependent and temperature-independent heat sources. Through the numerical examples for designing flow channels in a heat exchanger, it is shown that distinct topologies can be obtained according to the input power and the heat source conditions.