Modelling spatio-temporal environmental data

A conceptual model for environmental data is presented with special emphasis on the ability to store spatio-temporal references of the data. Other aspects of the model are the ability to handle hierarchical data and semantics of the measurements. The model was tested with an implementation on an object-relational database management system. As a part of the test implementation, a forestry data set covering 75 years and 4900 hectares was loaded onto the database.     

Antenna phase pattern measurements at millimeter wave frequencies using the differential phase method with only one power meter

The differential phase measurement method has been improved to need the use of only one power meter instead of three power meters. This enables accurate antenna phase pattern measurements with a simplified set-up, accompanied by the reduction in cost. All advantages of the differential phase measurement method are still also available, e.g. there is no need to phase lock oscillators or to use rotary joints. The measurement results for an antenna at 110 GHz are presented. A good agreement with earlier data was obtained.     

Comparing the Variation of Needle and Wood Terpenoids in Scots Pine Provenances

We determined variation in both the concentration and composition of terpenoids in needles and wood within nine Scots pine (Pinus sylvestris) provenances. Seedlings of different provenances representing a 1200-km N–S transect from Estonia to northern Finland were cultivated in Suonenjoki nursery field, central Finland, for seven years. Growth of seedlings and the number of vertical resin ducts in wood were also determined. -Pinene and 3-carene were the major monoterpenes both in the needles and wood. The total monoterpene concentration was about five times higher in the needles than in the wood. A strong positive correlation was found between proportional quantities of several terpenes of the needles and wood, particularly for 3-carene, sabinene, and terpinolene. The needles contained both labdane-type and tricyclic resin acids, whereas the wood contained only tricyclic ones. The wood had a four times higher tricyclic resin acid concentration than the needles. The highest total monoterpene concentration in the needles and in the wood occurred in the most northern Muonio provenance and in the most southern Saaremaa provenance plants, respectively. The amount of high 3-carene genotype trees decreased among the northern provenances. The wood of the most northern Muonio provenance showed the lowest total resin acid concentration, but provenance did not affect total tricyclic resin acids in the needles. Korpilahti provenance trees from central Finland had the best growth in height. In addition, Korpilahti and Ruokolahti provenance trees showed largest radial growth of stem and smallest number of vertical resin ducts. The results suggest that especially the proportional quantity of 3-carene in the needles could be used in estimating the amount of this compound in the wood and vice versa.     

Method for characterization of triacylglycerols and fat-soluble vitamins in edible oils and fats by supercritical fluid chromatography

This study demonstrates the usefulness of capillary supercritical fluid chromatography (SFC) for the characterization of triacylglycerols of edible oils and fats. Triacylglycerols were separated according to the acyl carbon number and the degree of unsaturation on a 25% cyanopropyl/25% phenyl/50% methylpolysiloxane stationary phase. Valuable information concerning the triacylglycerol composition of berry oils was obtained, despite the overlapping of certain triacylglycerol peaks. Simultaneous analysis of fat-soluble vitamins and triacylglycerols is not practical by capillary SFC with flame-ionization detection because of the low concentration of naturally-occurring fat-soluble vitamins in edible oils. Therefore, higher loading of the sample, which led to overloading of triacylglycerols, was required to get reasonable peaks for fat-soluble vitamins. The method was applied to the characterization of triacylglycerols and tocopherols in sea buckthorn pulp and seed oil, and cloudberry seed oil without any sample purification prior to SFC. In addition, the stationary phase proved useful for separating the more complex mixtures of triacylglycerols found in milk fat and in fish oil.     

Zero-sound attenuation in rotating and stationary3He-A and3He-B

We report on measurements of zero-sound attenuation in rotating and stationary³He-A and³He-B, in magnetic fields up to 350 mT. Strong and highly nonlinear rotation speed dependencies of sound amplitudes have been observed in both phases. The data gives information on vortex types and core sizes, although the analysis is not straightforward. The anomalous attenuation in³He-B at 200 mT near the AB transition, both in the stationary and in the rotating state, is interpreted to arise from the distortion of the energy gap of the B phase. Excess attenuation during the AB phase change was observed. Evidence for soft vortex cores in³He-B is presented. In addition, a critical velocity in the vortex free state, related to a textural transition, and the vortex creation times have been measured in³He-B. Furthermore, a metastable structure, possibly a new vortex state, has been observed in³He-B by rotating the sample through the A B transition.     

Predicting the health risks related to whole-body vibration and shock: a comparison of alternative assessment methods for high-acceleration events in vehicles

In this paper, alternative assessment methods for whole-body vibration and shocks are compared by means of 70 vibration samples measured from 13 work vehicles, deliberately selected to represent periods containing shocks. Five methodologies (ISO 2631-1:1997, BS 6841:1987, ISO 2631-5:2004, DIN SPEC 45697:2012 and one specified by Gunston [2011], ‘G-method’) were applied to the vibration samples. In order to compare different evaluation metrics, limiting exposures were determined by calculating times to reach the upper limit thresholds given in the methods. Over 10-fold shorter times to exposure thresholds were obtained for the tri-axial VDV (BS 6841) than for the dominant r.m.s. (ISO 2631-1) when exposures were of high magnitude or contained substantial shocks. Under these exposure conditions, the sixth power approaches (ISO 2631-5, DIN SPEC, G-method) are more stringent than a fourth power VDV method. The r.m.s. method may lead to misleading outcomes especially if a lengthy measurement includes a small number of severe impacts. In conclusion, methodologies produce different evaluations of the vibration severity depending on the exposure characteristics, and the correct method must be selected.