Organizing the production of heat-insulating inserts for ingot-mold hot tops

The Zlatoust Metallurgical Plant has developed a technology that employs semi-dry pressing to make two-layer (composite) heat-insulating inserts for ingot-mold hot tops. The working layer is made of a mixture of materials based on quartz sand, while the insulating layer is based on foamed vermiculate. The binders are sodium silicate solution and commercial lignosulfonate with a density of 1.12–1.20 g/cm³.     

A personal retrospect on three decades of high temperature fuel cell research; ideas and lessons learned

In1986 the Dutch national fuel cell program started. Fuel cells were developed under the paradigm of replacing conventional technology. Coal-fired power plants were to be replaced by large-scale MCFC power plants fuelled by hydrogen in a full-scale future hydrogen economy. With today's knowledge we will reflect on these and other ideas with respect to high temperature fuel cell development including the choice for the type of high temperature fuel cell. It is explained that based on thermodynamics proton conducting fuel cells would have been a better choice and the direct carbon fuel cell even more so, with electrochemical gasification of carbon as the ultimate step. The specific characteristics of fuel cells and multisource multiproduct systems were not considered, whereas we understand now that these can provide huge driving forces for the implementation of fuel cells compared to just replacing conventional combined heat and power production technology.     

Salient features of deactivation of an iron oxide catalyst for dehydrogenation of methylbutenes to isoprene in industrial adiabatic reactors

The problems of deactivation of iron oxide catalysts in the process of industrial dehydrogenation of methylbutenes to isoprene have been considered. The dependence of deactivation of the catalyst fixed bed on the time on-stream of different sections of the catalyst along the reactor height has been examined. The cause of poor performance of a part of the catalyst bed has been revealed and substantiated. Based of the results of the study, the authors propose an approach to predicting the catalyst performance during a long time on-stream.     

Comparative study on strength,sorptivity, and chloride ingress characteristics of air-cured and water-cured concretes modified with metakaolin

This paper reports an investigation in which the performance of plain and metakaolin (MK)-modified concretes were studied under two different curing regimes. The purpose of this study is to evaluate the effectiveness of MK in enhancing the strength and permeation properties of concrete. MK was used to replace 0–20% of Portland cement by weight in concrete with two water-binder (w/b) ratios of 0.35 and 0.55. The change in compressive strength, sorptivity, and chloride ingress with age at all cement replacement levels under both air and water curing are compared with those of the control concrete. The results indicated that the inclusion of MK greatly reduced sorptivity and chloride permeability of concrete in varying magnitudes, depending mainly on replacement level of MK, w/b ratio, curing condition, and chloride exposure period. It was found that under the inadequate or poor curing, MK-modified concretes suffered a more severe loss of compressive strength and permeability-related durability than the plain concretes.     

Chirp: a practical global filesystem for cluster and Grid computing

Traditional distributed filesystem technologies designed for local and campus area networks do not adapt well to wide area Grid computing environments. To address this problem, we have designed the Chirp distributed filesystem, which is designed from the ground up to meet the needs of Grid computing. Chirp is easily deployed without special privileges, provides strong and flexible security mechanisms, tunable consistency semantics, and clustering to increase capacity and throughput. We demonstrate that many of these features also provide order-of-magnitude performance increases over wide area networks. We describe three applications in bioinformatics, biometrics, and gamma ray physics that each employ Chirp to attack large scale data intensive problems.     

Preconditioned conjugate gradient methods for solving electromagnetic problems

It is shown that appropriately chosen preconditioners can significantly improve the convergence rate of the conjugate gradient (CG) algorithm as applied to electromagnetic problems. Preconditioners are constructed for the problems of scattering from frequency selective surfaces and scattering from infinite cylinders.     

Improving machine reliability and efficiency by increasing the fatigue life of the components

Analytical determination of the γ life of machine parts in terms of parameters of a set of finite size is considered. The γ strength values of various steels obtained by the proposed method and by the Dubey method are compared.     

Permeability properties of concretes with high reactivity metakaolin and calcined impure kaolin

This study reports the findings of an experimental study carried out on transport properties of the concretes modified with different calcined non purified kaolins (CK) and commercially available high reactivity metakaolin (MK). CK used in this study were obtained by calcining impure ground kaolins from four different quarries located on kaolin beds of different morphological and geological formations in Turkey. However, commercially available MK produced by thermal treatment of high purity kaolin from Czech Republic was used as reference material. In concrete mix design, the cement was replaced with 5, 10, 15, and 20 % by weight of CK or MK. The gas permeability, water permeability, water sorptivity, and chloride permeability tests were performed at the end of 28 and 90 days of curing periods. The results indicated that the concretes incorporated with different types of calcined kaolins had comparable performance in permeability with MK modified concrete, depending mainly on the type and amount of the mineral admixture used. Moreover, all of the concretes incorporation MK or CK had considerably better permeability than plain concrete regardless of the replacement level.     

Characteristics of neutron and gamma radiation in the core of the ΦC-1-4.37.P critical assembly

The characteristics of neutron and γ-ray fields (spectrum, flux density, average energy, cross sections of 23 nuclear reactions, and γ-ray dose rate) and the γ-ray field in the core of the ΦC-1-4.37.P critical assembly of the ΦC-1M critical bench are determined. The results of comparing the characteristics of the neutron fields of the ΦC-1-4.37.P critical assembly and analogous reactors are presented.