Hydrogen production through dry reforming of biogas using a porous electrochemical cell: Effects of a cobalt catalyst in the electrode and mixing of air with biogas

This paper reports the performance of porous Gd-doped ceria (GDC) electrochemical cells with Co metal in both electrodes (cell No. 1) and with Ni metal in the cathode and Co metal in the anode (cell No. 2) for CO₂ decomposition, CH₄ decomposition, and the dry reforming reaction of a biogas with CO₂ gas (CH₄ + CO₂ → 2H₂ + 2CO) or with O₂ gas in air (3CH₄ +?1.875CO₂ +?1.314O₂ → 6H₂ +?4.875CO +?0.7515O₂). GDC cell No. 1 produced H₂ gas at formation rates of 0.055 and 0.33?mL-H₂/(min?m²-electrode) per 1?mL-supplied gas/(min?m²-electrode) at 600?°C and 800?°C, respectively, by the reforming of the biogas with CO₂ gas. Similarly, cell No. 2 produced H₂ gas at formation rates of 0.40?mL-H₂/(min?m²) per 1?mL-supplied gas/(min?m²) at 800?°C from a mixture of biogas and CO₂ gas. The dry reforming of a real biogas with CO₂ or O₂ gas at 800?°C proceeded thermodynamically over the Co or Ni metal catalyst in the cathode of the porous GDC cell. Faraday's law controlled the dry reforming rate of the biogas at 600?°C in cell No. 2. This paper also clarifies the influence of carbon deposition, which originates from CH₄ pyrolysis (CH₄ → C + 2H₂) and disproportionation of CO gas (2CO → C + CO₂), on the cell performance during dry reforming. The dry reforming of a biogas with O₂ molecules from air exhibits high durability because of the oxidation of the deposited carbon by supplied air.     

Phase behavior in liquid crystallization for diblock copolymers consisting of rubbery amorphous and side-chain liquid crystalline components

Phase behavior in liquid crystallization was studied for a series of liquid crystalline (LC) diblock copolymers consisting of rubbery amorphous and side-chain liquid crystalline components, poly(n-butyl acrylate) (PBA) and poly[11-(4′-cyanophenyl-4″-phenoxy)undecyl acrylate] (PLC), respectively, using a time-resolved small-angle X-ray scattering (SAXS) techniques, DSC and polarized optical microscopy (POM). The block copolymers used had three kinds of copolymer compositions, 44, 20 and 15 wt% of PLC compositions (BLC44, BLC20 and BLC15, respectively). BLC44 showed a smectic liquid crystalline structure. In the process of liquid crystallization for BLC44, the SAXS peak due to the microphase separation structure existing before liquid crystallization was changed continuously to be at a smaller angular side, and at almost the same time, a new peak appeared at a further smaller angular side and developed. The former peak disappeared with the development of liquid crystallization. The behavior of these SAXS peaks suggests that the microphase separation structure was changed discretely at the transition from isotropic to smectic and that two phases coexist in the early stage of the liquid crystallization. The coexistence of two peaks in the early stage of the liquid crystallization corresponded to the POM observation. In the isotropization process, coexistence of two phases was not observed. For BLC20 exhibiting a cylindrical structure in both isotropic and liquid crystalline states, the liquid crystalline structure was not smectic but probably nematic, and the spacing was changed continuously in liquid crystallization. No liquid crystallization was observed in SAXS, POM and DSC for BLC15. The orientation of smectic layers within lamellar domains was investigated using 2D-SAXS images. The smectic layer was aligned perpendicularly to the lamellar interface.     

Construction of a control system for disturbance rejection using a dual observer

A well‐known control system which can reduce the adverse effects of disturbances is a disturbance observer. However, in many cases of mechanical systems, system disturbances which do not satisfy the matching condition may be imposed. Therefore, it may be difficult to reduce the adverse effects of the disturbances by the traditional disturbance observer. In this paper, a method of control system synthesis for disturbance rejection using a dual observer is proposed. This method is based on the zeroing induced by the disturbance localization problem. This problem may be solved by dividing the state space into observable subspace and unobservable subspace. As compared with an H_∞ controller based on perfect observation, the usefulness of the proposed control system for disturbance rejection is demonstrated by numerical simulations for a two‐mass spring system. © 2002 Scripta Technica, Electr Eng Jpn, 138(4): 50–60, 2002; DOI 10.1002/eej.1138     

Intelligent manipulator system with nonsymmetric and redundant master-slave

Some work is so complicated and unsteady that it is not possible to use automatic robots, such as FA robots. In such a case, a teleoperated manipulation system is applied. In this research, the authors aim at a reduction in the operator's physical and mental burdens. An artificially intelligent manipulator system has been developed with nonsymmetric and redundant master-slave. This system has five features: (1) a polar coordinates master arm; (2) a highly operational articulated slave arm with 7 degrees of freedom; (3) a nonsymmetric configuration and different degrees of freedom master-slave control; (4) an expert system; and (5) a new master-slave control motion, which makes the operator's task easier with automatic force/position control. The system was experimentally produced and its performance tested and evaluated. A qualitative evaluation was carried out by conducting a comparative test on the conventional master-slave control and the new master-slave control. It was found to be effective in reducing operating time, as well as work-induced fatigue.     

Carcinosarcoma of the rectosigmoid colon: report of a case

We report an unusual case of carcinosarcoma of the colon. An 80-year-old woman was admitted to our hospital with lower abdominal pain. Computed tomography showed a large pelvic mass, 18cm in maximal diameter, and barium enema and colonoscopy both showed a type-2 tumor in the sigmoid colon. We performed Hartmann's procedure with resection of the ileocolic segment. Immunohistochemical stains of the resected specimen revealed that most of the tumor consisted of spindle cell sarcoma with neural and muscle differentiation, while only the superficial area of an ulcerated lesion contained adenocarcinoma positive for carcinoembryonic antigen. The patient died of a fast-growing recurrent pelvic tumor 6 months postoperatively. Our experience of this case and our review of eight other cases in the English literature indicate that wide resection provides the best chance of cure, but careful postoperative follow-up is essential.     

Theory of rough surface effects on the anisotropic BCS states

We present a Green's function theory of the rough surface effects on the anisotropic BCS states using the formulation developed in the randomly rippled wall model. It is shown that the randomly rippled wall formulation is general enough to treat rough surface effects from the specular limit to the diffusive limit. We propose a statistical wall configuration such that gives the diffusive limit in the normal state. Within the weak coupling theory, we give a formal solution of the quasi-classical Green's function in a slab geometry and in a semi-infinite geometry with arbitrarily rough surfaces. The formal solution already satisfies the boundary condition. In the diffusive limit, the present theory correctly recovers the linearized gap equation obtained by Kjäldman et al. for the p-wave state in a slab geometry.     

X-ray Photoelectron Spectroscopy Investigation on the Low-Temperature Degradation of 2 mol% Y2O3-ZrO2 Ceramics

2 mol% Y₂O₃-ZrO₂ polycrystals were annealed in water and under vacuum to highlight the effect of the presence of H₂O on the low-temperature degradation transformation. The specimen surfaces with monoclinic phases transformed during annealing in the different environments were analyzed by X-ray photoelectron spectroscopy with special interest on the electron binding energy change of the constituent ions of the 2 mol% Y₂O₃-ZrO₂ ceramics after the degradation transformation. It was found that no change occurred for the electron-bonding energies of core levels of zirconium ions after the transformation, whereas Y-OH bonds were formed during annealing in water. This result suggested a possibility that the preferred hydration of yttrium took place at the surface of Y₂O₃-partially-stabilized ZrO₂, which is likely to be the reason for the low-temperature degradation accelerated by the presence of H₂O.     

Mechanical property changes in sapphire by nickel ion implantation and their dependence on implantation temperature

Sapphire plates, cut parallel to an {0001} plane, have been implanted with 300 keV nickel ions to doses ranging from 5×10¹² to 1×10¹⁷ Ni cm^–2 at specimen temperatures of 100, 300 and 523 K, in order to investigate the effect of implantation temperature on the mechanical property changes in sapphire caused by ion implantation. The measured changes in surface hardness, surface fracture toughness and bulk flexural strength were found to depend strongly on the implantation temperature, and were largely correlated with the residual surface compressive stress measured by using a cantilever beam technique. The surface amorphization that occurred only by the implantation at 100 K and at doses larger than 2×10s15 Ni cm^–2 reduced the hardness to 0.6 relative to the value of the unimplanted sapphire, and considerably increased the surface plasticity. Furthermore, the amorphization was found to involve a large volume expansion of 30% and to change drastically the apparent shape and size of a Knoop indentation flaw made prior to implantation. This effect was suggested to reduce stress concentrations at surface flaws and hence to increase the flexural strength.