Studies on graft copolymerization of 4‐vinylpyridine onto guar gum

Graft copolymerization of 4‐vinylpyridine (4‐VP) onto guar gum (GOH) using potassium monopersulfate (PMS)/thioacetamide (TAA) as a redox pair was studied in an aqueous medium under inert atmosphere. The concentration of potassium monopersulfate and thioacetamide should be 1.0 × 10^?2 and 5.0 × 10^?3 mol dm^?3, respectively, for highest grafting ratio and efficiency. Efficient grafting was observed at 19.25 × 10^?2 and 4.87 × 10^?2 mol dm^?3 concentration of 4‐vinylpyridine and sulfuric acid, respectively. The optimum temperature for grafting is 30°C. As the time period of reaction is increased, the grafting ratio increases, whereas efficiency decreases. The plausible mechanism of grafting has been suggested. A sample of guar gum and guar‐ g‐4‐vinylpyridine were subjected to thermogravimetric analysis with the objective of studying the effect of grafting 4‐vinylpyridine on the thermal stability of guar gum. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2380–2385, 2002     

Thermal Conductivity of Gelatinized Starches

The thermal conductivity (k) of gelatinized high-amylose and high-amylopectin starches was determined, using the heated probe method. The granular starches, mixed with distilled water at 1 to 4 kg water/ kg dry solids, were gelatinized at 120°C. Similar k values which varied from 0.434 to 0.548 W/mK in the temperature range 30 to 70°C were obtained for both starch gels. Experimental data were fitted to six structural models, representing various geometries for mixtures of water and dry starch. The perpendicular model, based on heat conduction in series through layers of dry starch and water, yielded best correlations. The predicted thermal conductivity of dry gelatinized starch (k_s) increased linearly with temperature T (K) according to the equation:      

Developing a limb repositioning robotic interface for persons with severe physical disabilities

Limb repositioning is necessary for individuals with severe physical disabilities to sustain muscle strength and prevent pressure sores. As robotic technologies become ubiquitous, these tools offer promise to support the repositioning process. However, research has yet to focus on ways in which individuals with severe physical disabilities can control robots for these tasks. This paper presents a study that examines the needs and attitudes of potential users with physical disabilities to control a robotic aid for limb repositioning. Subjects expressed interest in using brain–computer interface (BCI) and speech recognition technologies for purposes of executing robotic tasks. The performance of four subjects controlling arm movements on an avatar through the keyboard, mouse, BCI, and Dragon NaturallySpeaking speech recognition was evaluated. Although BCI and speech technologies may limit physical fatigue, more challenges were faced using BCI and speech conditions compared to the keyboard and mouse. This research promotes accessibility into mainstream robotic technologies and represents the first step in the development of a robotic prototype using a BCI and speech recognition technologies for limb repositioning.     

Tensor Clustering for Rendering Many‐Light Animations

Rendering animations of scenes with deformable objects, camera motion, and complex illumination, including indirect lighting and arbitrary shading, is a long‐standing challenge. Prior work has shown that complex lighting can be accurately approximated by a large collection of point lights. In this formulation, rendering of animation sequences becomes the problem of efficiently shading many surface samples from many lights across several frames. This paper presents a tensor formulation of the animated many‐light problem, where each element of the tensor expresses the contribution of one light to one pixel in one frame. We sparsely sample rows and columns of the tensor, and introduce a clustering algorithm to select a small number of representative lights to efficiently approximate the animation. Our algorithm achieves efficiency by reusing representatives across frames, while minimizing temporal flicker. We demonstrate our algorithm in a variety of scenes that include deformable objects, complex illumination and arbitrary shading and show that a surprisingly small number of representative lights is sufficient for high quality rendering. We believe out algorithm will find practical use in applications that require fast previews of complex animation.     

眼镜遮挡下的正面人脸识别

针对眼镜遮档对人脸识别影响较大这一问题,提出一种从正面人脸图像中提取并摘除眼镜的方法。首先利用主成分分析和独立成分分析法对输入的戴眼镜人脸进行重建,对比重建人脸和输入人脸,从而提取眼镜遮档区域;然后经过迭代误差补偿合成相应的无眼镜人脸;最后考虑到合成图像的特殊性,使用改进的特征加权方法实现人脸识别。实验结果表明,利用提出的人脸重建和特征加权方法进行戴眼镜人脸识别,正确率可以达到91%,优于传统方法。     

FPGA Implementation of Cross Virtual Concatenation Transmitter/ Receiver for Data Transmission over Next Generation SDH Systems

Cross Virtual Concatenation is the new technique proposed for bandwidth efficient transmission of data over SDH networks. SDH networks came into existence for reliable voice transmission. As the demand of data traffic grew in wide area networks, new technologies were developed and standardized for data transmission over SDH networks. The technologies used namely, GFP (generic framing procedure), VCAT (virtual concatenation) and LCAS (link capacity adjustment scheme) enable network operator to provide integrated voice and data services over their legacy SDH infrastructure. Data packets are encapsulated using framing protocols GFP. VCAT is a process of distributing the GFP framed data payload in number of virtual channels of same capacity forming a Virtually Concatenated Group (VCG). LCAS is used for dynamic bandwidth allocation. LCAS enhances the VCAT scheme with hitless in service addition and removal of VC’s to/from the VCG.VCAT combines homogeneous virtual channels together which in some cases limits the performance of VCAT. This paper describes the implementation of new concatenation technology named cross virtual concatenation (CVC), which combines heterogeneous VC’s together to utilize the SDH bandwidth more efficiently. CVC implementation requires only end node equipments to be upgraded as VCG members travel through the link similar to the conventional VCAT. This paper proposes FPGA implementation of transmitter and receiver circuits for 100 Mbps Ethernet data transmission over next Generation SDH systems using CVC, where two types of VC’s namely VC-3 and VC-12 are used for data transmission. Total Transmission delay is calculated as 125 μs. There is no complexity added at the receiver side due to this delay. The receiver is designed for 32 ms differential delay compensation which can be increased up to maximum 256 ms by increasing the buffer size at the receiver.     

Leading One Detection Hyperbolic CORDIC with Enhanced Range of Convergence

This paper focuses on developing an area efficient hyperbolic Coordinate Rotation Digital Computer (CORDIC) algorithm with performance improvement. The algorithm eliminates the need of scale factor calculation in the Range of Convergence (ROC). At the same time the range of convergence offered is higher than the conventional CORDIC ROC in the hyperbolic rotation mode. Being the only kind of algorithm in hyperbolic rotation with sign sequence μ?=?1 always, one complete operation requires just 5 iterations. Thus the pipelined implementation has 5 stages which provides a 50% increase in throughput in comparison to conventional CORDIC. As far as the area improvement is considered, 16-bit processor can be realized using 56% less number of full adders required by Flat-CORDIC. The x and y datapath are based on series expansion of hyperbolic functions. The complete algorithm design along with pipelined architecture implementation is detailed.     

Carbon dioxide emission and its regulation at land–water interface downstream of a point source at Ganga River (India)

The streams and rivers are considered hotspots of CO₂ exchange; and representative direct CO₂ emission measurements are essential for a correct regional estimate. We measured CO₂ emission flux at 15 sites at land–water interface downstream of a point source during low flow for three consecutive months for the year 2017. The general range of CO₂ efflux observed here was close to the results of regional studies, although values near the point source were disproportionately high (>350 mg/m²/h). CO₂ emission flux showed strong dependence on total organic carbon (TOC; R² = 0.96; P < 0.001), (R² = 0.88; P < 0.001), soluble reactive‐P (SRP; R² = 0.91; P < 0.001) and microbial activity measured in terms of fluorescein diacetate activity (FDAase; R² = 0.92; P < 0.001) and substrate induced respiration (SIR; R² = 0.96; P < 0.001). Because point source‐associated interfaces provide heterogeneous habitats, our study suggests the need for large scale monitoring of CO₂ emission at land–water interface of major rivers for more correctly presenting the regional scale CO₂ budget.     

Paying to belong: When does rejection trigger ingratiation?

Societies and social scientists have long held the belief that exclusion induces ingratiation and conformity, an idea in contradiction to robust empirical evidence linking rejection with hostility and aggression. The classic literatures on ingratiation and conformity help resolve this contradiction by identifying circumstances under which rejection may trigger efforts to ingratiate. Jointly, findings from these literatures suggest that when people are given an opportunity to impress their rejecters, ingratiation is likely after rejection experiences that are harsh and that occur in important situations that threaten the individual's self-definition. Four studies tested the hypothesis that people high in rejection sensitivity and therefore dispositionally concerned about rejection will utilize opportunities to ingratiate after harsh rejection in situations that are self-defining. In 3 studies of situations that are particularly self-defining for men, rejection predicted ingratiation among men (but not women) who were high in rejection sensitivity. In a 4th study, harsh rejection in a situation particularly self-defining for women predicted ingratiation among highly rejection-sensitive women (but not men). These findings help identify the specific circumstances under which people are willing to act in socially desirable ways toward those who have rejected them harshly. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

HEAT TRANSFER IN MULTIPHASE CONTACTORS

A procedure for the prediction of wall-bed heat transfer coefficient for bubble columns and gas-solid fluidized beds is developed on the basis of hydrodynamic behavior of these contactors. A comparison between the predicted and experimental values of heat transfer coefficient over a wide range of design and operating variables is presented. An attempt is made to analyze the occurrence of maxima in heat transfer coefficient with respect to gas velocity in the case of fluidized beds. A procedure for the calculation of the optimum superficial gas velocity is outlined.