Comparison of Lactic Acid Productivities at High Substrate Conversions in a Continuous Two-stage Fermenter With Cell Recycle Using Different Kinetic Models

The steady-state performance of a two-stage recycle fermenter with two different types (I and II) of configurations for staging was investigated numerically for the continuous production of lactic acid. In Type I the bleed broth withdrawn from the first stage is supplied to the second fermenter, and in Type II both filtrate and bleed broth from the first stage are introduced to the second stage. Using four different kinetic models taken from the literature, the effects of operating parameters on the overall lactic acid productivities and the overall substrate conversions are examined. At moderate conversions, productivities for Type I operation are found to be higher than those for Type II and for the single-stage system. In the case of high conversions close to complete consumption, Type II operation is more efficient than the Type I and single-stage systems. For 99% conversion and 40 kg m^-3 substrate feed concentration, productivities for Type II are predicted to be 14-74% higher compared to those for the single-stage system at the same bleed ratios.     

Optical Energy Gap and Below Gap Optical Absorption of Fullerene Films Measured by the Constant Photocurrent Method and Photothermal Deflection Spectroscopy

The CPM spectra of fullerene films was measured to obtain the below gap absorption. The optical energy gap E_o was obtained by using the Tauc's plots. E_o did not change greatly with intercalated impurities. The absorption due to intercalated impurities was found below 1.6eV.     

Copper ⇌ Alkali Ion Exchange of Alkali Aluminosillcate Glasses in Copper-Containing Molten Salt: I, Monovalent Copper Salt, CuCl

Cu⁺⇌ R⁺ (R = Li, Na, and K) ion exchange experiments were conducted for 20R₂O·10Al₂O₃·70SiO₂ glasses in molten CuCl at 550°C in air and nitrogen atmospheres. The depth profiles of the copper incorporated into glasses were determined with an electron microprobe X-ray analyzer. The total amount of diffusing copper, M _t, strongly depended on the type of alkali ion in the glass and the ion-exchange atmosphere; i.e., M _t increased with increasing cationic size in the order Li < Na < K and M _t was greater in air than in nitrogen. The Cu ⇌ R⁺ ion exchange kinetics are discussed in detail.     

Optical element converting linear polarization into circular-tangential polarization

A new optical element capable of converting linear polarization into circular-tangential polarization (i.e., the electric vector is along the tangential direction to a circle) is proposed and demonstrated. The conversion characteristics of the fabricated element are evaluated, and the magnitude of aberration produced by the element is shown to be insignificant.     

Fabrication of a concentric-circular focusing grating coupler by a conic-wave-front interference method and light-convergence experiments using the coupler

An interference method utilizing conic-wave-front light for the fabrication of a concentric-circular and chirped grating is proposed. The design method and fabrication of an interference lens that generates conic-wave-front light are also shown. A focusing element is constructed from a concentric-circular grating coupler with a 0.4-mm diameter and a concentric-circular focusing grating coupler with an annular aperture of 2-mm focal length and 2.0-4.0-mm diameter. Light-convergence experiments using the focusing element were able to obtain a focusing spot of 0.5 μm × 0.7 μm at half-intensity widths for a wavelength of 820 nm in combination with liquid-crystal polarization elements.     

Topological design considering flexibility under periodic loads

Topology optimization has been extensively considered to design the structural configuration for the stiffness maximization and the eigenfrequency maximization. In this paper, we construct a topology optimization method implementing flexibility with the time-periodic loading condition. First, the flexibility in the dynamic periodic loading is formulated using the mutual energy concept. Second, the multi-optimization problem is formulated using a new multi-objective function in order to obtain an optimal solution incorporating both flexibility and stiffness. Next, the topology optimization procedure is developed using the homogenization design method. Finally, some examples are provided to confirm the optimal design method presented here. Received January 18, 1999     

A monolithically integrated high‐efficiency Cu(In,Ga)Se2 mini‐module structured solely by laser

Monolithically integrated Cu(In,Ga)Se₂ mini‐modules were fabricated in order to reduce the width of patterning related dead area. The Cu(In,Ga)Se₂ layers were prepared on soda‐lime glasses using the multistage process at low substrate temperature below 500 °C. A picosecond laser with a wavelength of 532 nm was used for all of the structuring processes (P1, P2, and P3) for the monolithic integration. A “lift‐off” type structuring was applied for P1 and P3, and an “ablation” type was for P2. The laser structuring was optimized to be minimizing the dead area width, and the width of about 70 µm was successfully achieved. A mini‐module, in which the optimized structuring processes were applied for the integration, demonstrated a certified efficiency of 16.6%. Copyright © 2015 John Wiley & Sons, Ltd.     

Optimum design of integrated tandem-type a-Si solar cell submodule

A new optimum design, in which the actual daily spectral data under outdoor conditions over a year were considered, was developed for the integrated tandem-type a-Si solar cell submodule with a structure of glass/TCO/a-Si: H(pinpin)/metal. It was found by this design that the optimum cell number connected in series, at which maximum total annual output power was obtained, was small compared with that obtained by the conventional optimum design under standard conditions (AM1.5, 100 mW cm⁻²). It was also found that when light-induced degradation was considered, the thickness of the i-layer for the second pin cell was thinner than that by the conventional optimum design.     

Characteristics of a-Si solar cells prepared by the super chamber at a high substrate temperature

A new approach to high-performance a-Si solar cells was studied. a-Si films prepared at a high substrate temperature (> 250°C) have a higher absorption coefficient and a low Si H₂ bond density. the effect of deposition temperature on the open-circuit voltage (V_oc) has been investigated systematically for glass/SnO2 Ipin/metal and glass/metal/nip/indium tin oxide (ITO) structure a-Si solar cells. The V_oc is found to depend strongly on the thermal history of the p/i interface. A short-circuit current of 19.5 mA/cm⁻⁻² was achieved for an a-Si solar cell using an a-Si i-layer with a thickness of 4000 Å, which was prepared at a substrate temperature of 270°C.     

Vitamin E reduces cholesterol esterification and uptake of acetylated low density lipoprotein in macrophages

The effects of vitamin E on cholesteryl ester (CE) metabolism in 1774 cells were examined. Pretreatment of 1774 cells with vitamin E at concentrations above 50 μM significantly decreased acetylated low density lipoprotein (LDL)-induced incorporation of [¹⁴C]oleate into CF in cells in a dose-dependent manner. This was partly due to vitamin E Also significantly inhibiting the uptake of [³H]CE-labeled acetylated LDL by 1774 cells. A trend existed toward suppression of acyl-CoA:cholesterol acyltransferase (ACAT) activity in the cell lysate at high vitamin E concentration, but there was no effect on hydrolysis of CE. These data indicate that vitamin E reduces the uptake of modified LDL and suppresses ACAT activity, resulting in less cholesterol esterification in macrophages; a novel mechanism underlying the antiatherogenic properties of vitamin E.