1.3 μm InAsyP1-y-InPstrained-layer quantum-well laser diodes grown by metalorganic chemicalvapor deposition

The authors have fabricated 1.3-μm InAsP-InP separate-confinement-heterostructure (SCH) strained-layer double-quantum-well (SL-DQW) laser diodes (LDs) by metalorganic chemical vapor deposition (MOCVD). A low threshold current density of 410 A/cm ² was obtained. The CW threshold current was as low as 1.8 mA at 20°C, and maximum CW operating temperature of 120°C was obtained. These characteristics are almost the same as those of well-designed GaInAsP-InP SL-QW LDs. Further improvement of the characteristics of InAsP-InP LDs is expected by optimizing the device structure     

Effect of Mixing Time on the Lubricating Properties of Magnesium Stearate and the Final Characteristics of the Compressed Tablets

The effect of mixing time on hardness, disintegration time and ejection force in tablettlng of magnesium stearate and lactose granules was studied. The hardness of the tablets decreased with an increase in mixing time of the blends, as previously reported. A semilogarithmic plot of the hardness versus mixing time gave a straight line having a turning point. At the early phase of mixing the hardness was decreasing with a large first-order rate and then continued to decrease with another small first-order rate. The change in disintegration time or ejection force versus mixing time was basically the same as that in the hardness. This type of plot was applicable to the mixing magnesium stearate with not only granular but also powdered materials.     

Living cationic polymerization of p-methoxystyrene by hydrogen iodide/zinc iodide at room temperature

Summary Cationic polymerization of p-methoxystyrene initiated by HI/ZnI₂ in toluene afforded living polymers not only at low temperature (–15°C) but at room temperature (+25°C) as well. The number-average molecular weight of the polymers was directly proportional to monomer conversion and in excellent agreement with the calculated value assuming that one polymer chain forms per unit hydrogen iodide. On addition of a fresh feed of monomer at the end of the first-stage polymerization, the added feed was smoothly polymerized at nearly the same rate as in the first stage; the polymer molecular weight further increased in direct proportion to monomer conversion and was close to the calculated value for living polymer. Throughout these reactions, the molecular weight distribution of the polymers stayed very narrow (¯M_w/¯M_n<1.1). This is the first example of living cationic polymerizations of styrene derivatives that proceed even at room temperature.     

Synthesis of Ba2NaNb5O15 Powders and Thin Films Using Metal Alkoxides

Transparent and highly oriented Ba₂NaNb₅O₁₅ (BNN) thin films have been prepared by using metal alkoxides. A homogeneous precursor solution was prepared by the controlled reaction of NaOC₂H₅, Nb(OC₂H₅)₅, and barium metal. The BNN precursor included a molecular-level mixture of NaNb(OC₂H₅)₆ and Ba[Nb(OC₂H₅)₆]₂ in ethanol. The alkoxy-derived powder crystallized to a low-temperature phase, and then transformed to orthorhombic BNN (tungsten bronze) at 600°C. BNN precursor films on substrates crystallized to orthorhombic BNN at 800°C via the low-temperature phase. Highly (002) oriented BNN films of tungsten bronze structure were successfully prepared on MgO (100) substrates at 700°C by using BNN underlayer.     

Peroxiredoxin 2 as a chemotherapy responsiveness biomarker candidate in osteosarcoma revealed by proteomics

Purpose : We aimed to identify novel chemotherapy responsiveness biomarkers for osteosarcoma (OS) by investigating the global protein expression profile of 12 biopsy samples from OS patients. Experimental design : Six patients were classified as good responders and six as poor responders, according to the Huvos grading system. The protein expression profiles obtained by 2‐D DIGE consisted of 2250 protein spots. Results : Among them, we identified 55 protein spots whose intensity was significantly different (Bonferroni adjusted p‐value<0.01) between the two patient groups. Mass spectrometric protein identification demonstrated that the 55 spots corresponded to 38 distinct gene products including peroxiredoxin 2 (PRDX 2). Use of a specific antibody against PRDX 2 confirmed the differential expression of PRDX 2 between good and poor responders, while PRDX 2 levels as measured by Western blotting correlated highly with their corresponding 2‐D DIGE values. The predictive value of PRDX 2 expression was further confirmed by examining an additional four OS cases using Western blotting. Conclusions and clinical relevance : These results establish PRDX 2 as a candidate for chemotherapy responsiveness marker in OS. Measuring PRDX 2 in biopsy samples before treatment may contribute to more effective management of OS.     

Wide-gap layered oxychalcogenide semiconductors: Materials, electronic structures and optoelectronic properties

Applying the concept of materials design for transparent conductive oxides to layered oxychalcogenides, several p-type and n-type layered oxychalcogenides were proposed as wide-gap semiconductors and their basic optical and electrical properties were examined. The layered oxychalcogenides are composed of ionic oxide layers and covalent chalcogenide layers, which bring wide-gap and conductive properties to these materials, respectively. The electronic structures of the materials were examined by normal/inverse photoemission spectroscopy and energy band calculations. The results of the examinations suggested that these materials possess unique features more than simple wide-gap semiconductors. Namely, the layered oxychalcogenides are considered to be extremely thin quantum wells composed of the oxide and chalcogenide layers or 2D chalcogenide crystals/molecules embedded in an oxide matrix. Observation of step-like absorption edges, large band gap energy and large exciton binding energy demonstrated these features originating from 2D density of states and quantum size effects in these layered materials.     

Controlling Pyrene Association in DNA Duplexes by B- to Z-DNA Transitions

B- to Z-DNA transitions play a crucial role in biological systems and have attracted the interest of researchers for their applications in DNA nanotechnology. DNA and DNA analogues have also been used as templates to construct helical chromophore associations with π interactions. In this work, the B- to Z-DNA transition-induced switching of pyrene in an association manner was evaluated using DNA duplexes with non-nucleosidic pyrene residues in the middle of d(CG) repeat sequences. One of the pyrene-labeled DNAs was shown to exhibit inverted exciton coupled circular dichroism signals upon pyrene association through a B- to Z-DNA transition. This observation indicates that pyrene association switches the DNA conformation from right- to left-handed. Interestingly, the fluorescence of the pyrene-labeled DNA duplex also dynamically changed upon switching of the pyrene in an association-based manner. Taken together, these studies demonstrate that pyrene-labeled DNA shows promise as a chiroptical molecular switch.     

Effects of water chemistry and potential distribution on electrochemical corrosion potential measurements in 553 K pure water

The effects of water chemistry distribution on the potential of a reference electrode and of the potential distribution on the measured potential should be known qualitatively to obtain accurate electrochemical corrosion potential (ECP) data in BWRs. First, the effects of oxygen on a platinum reference electrode were studied in 553 K pure water containing dissolved hydrogen (DH) concentration of 26–105 μg kg^?1 (ppb). The platinum electrode worked in the same way as the theoretical hydrogen electrode under the condition that the molar ratio of DH to dissolved oxygen (DO) was more than 10 and that DO was less than 100 ppb. Second, the effects of potential distribution on the measured potential were studied by using the ECP measurement part without platinum deposition on the surfaces connected to another ECP measurement part with platinum deposition on the surfaces in 553 K pure water containing 100–130 ppb of DH or 100–130 ppb of DH plus 400 ppb of hydrogen peroxide. Measured potentials for each ECP measurement part were in good agreement with literature data for each surface condition. The lead wire connecting point did not affect the measured potential. Potential should be measured at the nearest point from the reference electrode in which case it will be not affected by either the potential distribution or the connection point of the lead wire in pure water.     

Homogeneous Strain Introduction Using Reciprocation Technique in High-Pressure Sliding

Metallurgical and Materials Transactions A - This study examines strain distribution occurring in the high-pressure sliding (HPS) processing for rods of pure Al and an AZ61 alloy. The strain...     

DNA‐Templated Synthesis of Perylenediimide Stacks Utilizing Abasic Sites as Binding Pockets and Reactive Sites

DNA is considered to be a promising biomolecule as a template and scaffold for arranging and organizing functional molecules on the nanoscale. The construction and evaluation of DNAs containing multiple functional molecules that are useful for optoelectronic devices and sensors has been studied. In this paper we report the efficient incorporation of perylenediimide (PDI) units into DNA by using abasic sites both as binding sites and as reactive sites and the construction of PDI stacks within the DNA structure, accomplished through the preorganization of the PDI units in the hydrophobic pocket within the DNA. Our approach could become a valuable method for construction of DNA/chromophore hybrid structures potentially useful for the design of DNA‐based devices and biosensors.