Oxidation of doped europium in BaMgAl10O17 by annealing studied by x‐ray‐absorption fine‐structure measurements

Abstract— We studied the influence of annealing in air on doped europium in BaMgAl₁₀O₁₇ by performing x‐ray absorption fine‐structure measurements. We determined the oxidation of doped divalent europium by annealing in air at over 500°C. The interatomic distance between the europium and the surrounding oxygen atoms was compressed by oxidation. It also appears that the oxidation process of europium is determined by the diffusion of oxygen into BaMgAl₁₀O₁₇.     

Development of co-continuous structure in liquid crystalline polyester

We investigated liquid crystallization of liquid crystalline polyester BB-5 during isothermal annealing by digital high-fidelity microscope and light scattering. A liquid crystalline spherical domain having a radius of micrometers appeared by annealing at around 180 °C. The domain grew dendritically in all directions. Neighboring liquid crystalline regions coalesced and then interconnected. The interconnected structure changed to a co-continuous two-phase structure with increasing ordering of the liquid crystalline phase, and the interface between the liquid crystalline phase and the isotropic phase became smoother over time. Liquid crystallization stopped before volume filling the whole space, and the liquid crystalline phase and isotropic phase coexisted. The liquid crystalline region became narrower with an increase in the temperature of the liquid crystallization. Such structural development is different from the liquid-liquid phase separation via spinodal decomposition, and it may be attributed to the segregation of non-liquid crystallizable low molecular weight molecules from the growth front by fractionation of the molecular weight distribution during the liquid crystallization in terms of the instability of the diffusion-controlled interface.     

Transmittance and cathodoluminescence of AlN ceramics sintered with Ca3Al2O6 as sintering additive

Aluminum nitride ceramics were prepared by sintering with 0–4.8 mass% of Ca₃Al₂O₆ (C₃A) as a sintering additive. The transmittance in the range of 260–550 nm increased with increasing amount of C₃A. The cathodoluminescence intensity attributed to oxygen-induced defects decreased with increasing amount of C₃A. From the results, the increase of the transmittance in the range of 260–550 nm was considered to be related to the decrease of the oxygen-induced defect density.     

Fabrication of blue-light emission fused-silica substrates by using Si-ion implantation and high-temperature annealing

We fabricated fused-silica substrates which emit blue light by using Si-ion implantation and high-temperature annealing. Photoluminescence peak wavelengths are around 400 nm, and the peak intensities can be remarkable after annealing above 1150 °C.     

Induction of Tertiary Phase Epileptiform Discharges after Postasphyxial Infusion of a Toll-Like Receptor 7 Agonist in Preterm Fetal Sheep

Background: Toll-like receptor (TLR) agonists are key immunomodulatory factors that can markedly ameliorate or exacerbate hypoxic–ischemic brain injury. We recently demonstrated that central infusion of the TLR7 agonist Gardiquimod (GDQ) following asphyxia was highly neuroprotective after 3 days but not 7 days of recovery. We hypothesize that this apparent transient neuroprotection is associated with modulation of seizure-genic processes and hemodynamic control. Methods: Fetuses received sham asphyxia or asphyxia induced by umbilical cord occlusion (20.9 ± 0.5 min) and were monitored continuously for 7 days. GDQ 3.34 mg or vehicle were infused intracerebroventricularly from 1 to 4 h after asphyxia. Results: GDQ infusion was associated with sustained moderate hypertension that resolved after 72 h recovery. Electrophysiologically, GDQ infusion was associated with reduced number and burden of postasphyxial seizures in the first 18 h of recovery (p < 0.05). Subsequently, GDQ was associated with induction of slow rhythmic epileptiform discharges (EDs) from 72 to 96 h of recovery (p < 0.05 vs asphyxia + vehicle). The total burden of EDs was associated with reduced numbers of neurons in the caudate nucleus (r² = 0.61, p < 0.05) and CA1/2 hippocampal region (r² = 0.66, p < 0.05). Conclusion: These data demonstrate that TLR7 activation by GDQ modulated blood pressure and suppressed seizures in the early phase of postasphyxial recovery, with subsequent prolonged induction of epileptiform activity. Speculatively, this may reflect delayed loss of early protection or contribute to differential neuronal survival in subcortical regions.     

Novel Constitutive Equation for Predicting Dynamic Recrystallization During Hot Working Considering the Efficiency of Power Dissipation

The efficiency of power dissipation (η) in a dynamic material model has been conventionally used for qualitative predictions to estimate the hot working conditions at which dynamic recrystallization (DRX) is dominant. However, predicting the quantitative value of the DRX fraction (X_DRX) from η remains a challenge. In this paper, a constitutive equation is proposed to quantitatively predict X_DRX using η. The proposed equation for describing X_DRX is derived from the reaction rate equation using the assumption that the DRX rate depends on η. The proposed equation is verified via hot compression tests of equiaxed Ti–6Al–4V ELI alloys (Ti-64) in the (α + β) region. The predicted and experimental X_DRX values are found to be generally consistent with one another, exhibiting an average absolute error of 0.05. Furthermore, the proposed equation provides the same level of prediction accuracy as the conventional Johnson–Mehl–Avrami–Kolmogorov (JMAK) equation. Therefore, the proposed equation can be used to quantitatively predict X_DRX following hot compression tests of equiaxed Ti-64. Moreover, compared with the JMAK equation, the proposed equation is expressed in fewer parameters and constant terms. It is, thus, expected to facilitate the quantitative prediction of X_DRX.

     

Extraction and implementation of muscle synergies in neuro-mechanical control of upper limb movement

This work faces the redundancy problem, a central concern in robotics, in a particular force-producing task by using muscle synergies to simplify the control. We extracted muscle synergies from human electromyograph signals and interpreted the physical meaning of the identified muscle synergies. Based on the human analysis results, we hypothesized a novel control framework that can explain the mechanism of the human motor control. The framework was tested in controlling a pneumatic-driven robotic arm to perform a reaching task. This control method, which uses only two synergies as manipulated variables for driving antagonistic pneumatic artificial muscles to generate desired movements, would be useful to deal with the redundancy problem; thus, suggesting a simple but efficient control for human-like robots to work safely and compliantly with humans.     

Distinctive combustion stages of single heavy oil droplet under microgravity

This report presents an investigation on the combustion of single droplets comprised of heavy oil and oil mixtures blending diesel light oil (LO) and a heavy oil residue (HOR). The tests were conducted in a microgravity facility that offered 10 s of free-fall time. Fine wire thermocouples supported the droplets, resulting in a measurement of droplet temperature history. Additional data were the droplet and flame size history. The results identified four distinctive burning stages between ignition and extinction for heavy oil (C class) and HOR-LO blends. They are, in succession, the start-up, inner evaporation, thermal decomposition (pyrolysis) and polymerization stages. The start-up stage denoted an initial transient period, where the LO components burned from the droplet surface and the droplet temperature increased rapidly. The latter three stages featured pronounced droplet swellings and contractions caused by fuel evaporation and decomposition inside the droplet. An evaporation temperature demarcated the start-up stage from the inner evaporation stage, and this temperature corresponded to a plateau in the temperature history of the droplet. Two additional temperatures, termed the decomposition and polymerization temperatures, indicated the ends of the evaporation and decomposition stages. These temperatures were similarly identified by plateaus or inflection points in the time-temperature diagram. The evaporation temperature gradually decreased with increasing the initial LO mass fraction in the droplet, whereas the other two temperatures were almost independent of the oil composition. All three temperatures increased with decreasing initial droplet diameter, but the dependence was very slight. Based on the results, the combustion of heavy oil droplets appears to be dominated by a distillation-like vaporization mechanism, because of the rapid mass transport within the droplets caused by the disruptive burning.     

Preparation of Self-Standing, Submillimeter-Thick Porous Titania Films with Anatase Nanocrystallites Using Evaporation-Induced Self-Assembly

Self-standing transparent submillimeter-thick (∼0.34 mm) mesoporous titania films were prepared using the evaporation-induced self-assembly (EISA) of a triblock copolymer template and titanium tetraethoxide. Performing EISA at low temperature and low humidity improved the transparency and continuity of the films. As synthesized films had a well-defined hexagonal mesostructure and the existence of both amorphous titania and anatase nanocrystallites (2 nm) was confirmed. The films that were calcined at 400°C were composed of anatase nanocrystallites (14–16 nm) and had a BET surface area of 90 m² g⁻¹ with 13-nm pores. The films were characterized using XRD, FE-SEM, TEM, and N² adsorption–desorption measurements. An erratum to this article can be found at     

A 63-year-old man with progressive cauda equina/conus medullaris syndrome

BACKGROUND: This article presents results of the acute treatment phase of a 2-site study comparing cognitive behavioral group therapy (CBGT) and treatment with the monoamine oxidase inhibitor phenelzine sulfate for social phobia. METHODS: One hundred thirty-three patients from 2 sites received 12 weeks of CBGT, phenelzine therapy, pill placebo administration, or educational-supportive group therapy (an attention-placebo treatment of equal credibility to CBGT). The "allegiance effect," ie, the tendency for treatments to seem most efficacious in settings of similar theoretical orientation and less efficacious in theoretically divergent settings, was also examined by comparing responses to the treatment conditions at both sites: 1 known for pharmacological treatment of anxiety disorders and the other for cognitive behavioral treatment. RESULTs: After 12 weeks, phenelzine therapy and CBGT led to superior response rates and greater change on dimensional measures than did either control condition. However, response to phenelzine therapy was more evident after 6 weeks, and phenelzine therapy was also superior to CBGT after 12 weeks on some measures. There were few differences between sites, suggesting that these treatments can be efficacious at facilities with differing theoretical allegiances. CONCLUSIONS: After 12 weeks, both phenelzine therapy and CBGT were associated with marked positive response. Although phenelzine therapy was superior to CBGT on some measures, both were more efficacious than the control conditions. More extended cognitive behavioral treatment and the combination of modalities may enhance treatment effect.