Cryptosporidium Log-inactivation with Ozone Using Effluent CT10, Geometric Mean CT10, Extended Integrated CT10 and Extended CSTR Calculations

The draft Long-Term 2 Enhanced Surface Water Treatment Rule (LT2ESWTR) contains Cryptosporidium log-inactivation CT tables (ozone-in-water concentration [residual], “C” times contact time, T). Depending on water temperature, Cryptosporidium CT values that are listed are 15 to 25 times greater than CT values for equivalent Giardia log-inactivation credit. The elevated operating dose required for Cryptosporidium log-inactivation credit has the potential to increase disinfection by-product (DBP) formation (e.g., bromate). Calculating CT value accurately will minimize ozone dose, which will decrease operating cost and lower DBP formation, and at the same time maintain disinfection protection through implementation of scientifically based safety factors. Various methods are available for calculating CT value. The method chosen depends largely on the available information concerning ozone residual characteristics and hydrodynamic features of the ozone contactor, plus local regulatory requirements. Four methods are discussed in this paper. Each method can be used to calculate Giardia, virus, and Cryptosporidium log-inactivation credit.     

Start-Up and Optimization of the Ozone Disinfection Process At the Sebago Lake Water Treatment Facility

The purpose of the ozone process at the Sebago Lake Water Treatment Facility (SLWTF) is to meet the disinfection requirements of the Surface Water Treatment Rule with ozone and without filtration. The start-up experience is presented including initial operating strategies to meet disinfection requirements. An ozone system performance test conducted during the first month of plant operation is described and the results are reviewed. The initial and proposed activities of an ozone optimization project are discussed.     

Practical Design Model for Calculating Bubble Diffuser Contactor Ozone Transfer Efficiency

Ozone transfer to water or wastewater is necessary before desirable, effective ozone reactions occur. Several factors affect ozone transfer efficiency, including water quality characteristics, contactor configuration, and applied ozone characteristics. The design model presented in this paper addresses all factors affecting ozone transfer. The model was used to compare measured transfer efficiency with predicted transfer efficiency at four full-scale wastewater ozone disinfection facilities. A relatively good prediction was obtained at each plant.

The paper presents an example calculation of ozone transfer efficiency. Also, the effect of changes to some of the factors affecting transfer efficiency is presented, such as changes in diffuser depth, plant elevation, ozone concentration, water quality (i.e., ozone demand), pH, detention time, temperature, and acombination of factors. The design model may be used to evaluate the effect of changes in plant design on transfer efficiency, but cannot provide an absolute value for transfer efficiency until difficult-to-measure parameters, such as bubble diameter, are known.     

Sterol and steryl ester regulation of phospholipase A2 from the mosquito parasiteLagenidium giganteum

Lagenidium giganteum, a facultative parasite of mosquito larvae, cannot synthesize sterols, and requires an exogenous source of these lipids in order to enter its reproductive cycle. This parasite grows vegetatively in the absence of sterols, but requires cholesterol or structurally related compounds to produce motile zoospores, which are the only stage capable of infecting mosquitoes. Sterols structurally related to cholesterol and some steryl esters inhibited the activity ofL. giganteum phospholipase A₂ (PLA₂), an enzyme that hydrolyzes fatty acids from thesn-2 position of glycerophospholipids. Sterols that induce reproduction inhibitedL. giganteum PLA₂ activity, while sterols and steroids that do not support sporulation had minimal effect. Most steryl esters had no effect on enzyme activity, but cholesteryl arachidonate (CA) was a potent inhibitor of parasite PLA₂. Not all enzymes partly purified using a DEAE-Sephacel column were affected by these lipids, demonstrating selective inhibition of specific enzymes. Potency was enhanced by up to several orders of magnitude if epoxy fatty acids were esterified to the cholesterol nucleus. The steryl ester pool was dynamic during morphogenesis, and the fatty acid composition of the steryl esters did not mimic total cell or membrane (glycerophospholipid) fatty acid composition asL. giganteum proceeded through its growth cycle. Synthesis of CA and monoepoxy CA by the parasite was confirmed using electrospray mass spectrometry and collision-induced dissociation. Steryl derivatives selectively inhibited PLA₂ enzymes from bovine pancreas, snake venom, and human cytoplasmic 85-kDa PLA₂.     

Power Evaluation of the Los Angeles Oxygen–Fed Ozone System

The Los Angeles Department of Water and Power (LADWP) operates a 600 mgd (2,270 ML/day) direct filtration water treatment plant which includes a 7,900 lb/day (149 kg/hr) ozonation system. Ozone is applied as a preoxidant for the purposes of disinfection and microflocculation. The ozonation system is unique in that high purity oxygen is generated on–site and is used as the feed–gas in a once–through system. The process was selected through competitive bids and evaluated for total present worth from 20–year life cycle costs which included capital plus energy expenses. Power consumption (and penalty) was valued at $6,500/kW. System power demand was measured at nine ozone production rates. A minimum specific energy of 6.5 kWh/lb (14.3 kWh/kg) of ozone was observed when generating ozone at a concentration between 5 and 6 % (wt) [65 and 80 g/m³; where the standard temperature and pressure are 70F (21.11 C) and 1 atm, respectively]. The test methodology and data assessment considerations were developed jointly by the owner and manufacturer, and produced results with practical significance beyond the performance testing objective.     

Effect of finite heat input on the power performance of micro heat engines

Micro heat engines have attracted considerable interest in recent years for their potential exploitation as micro power sources in microsystems and portable devices. Thermodynamic modeling can predict the theoretical performance that can be potentially achieved by micro heat engine designs. An appropriate model can not only provide key information at the design stage but also indicate the potential room for improvement in existing micro heat engines. However, there are few models reported to date which are suitable for evaluating the power performance of micro heat engines. This paper presents a new thermodynamic model for determining the theoretical limit of power performance of micro heat engines with consideration to finite heat input and heat leakage. By matching the model components to those of a representative heat engine layout, the theoretical power, power density, and thermal efficiency achievable for a micro heat engine can be obtained for a given set of design parameters. The effects of key design parameters such as length and thermal conductivity of the engine material on these theoretical outputs are also investigated. Possible trade-offs among these performance objectives are discussed. Performance results derived from the developed model are compared with those of a working micro heat engine (P3) as an example.     

Automatic calibration of urban drainage model using a novel multi-objective genetic algorithm.

In order to successfully calibrate an urban drainage model, multiple calibration criteria should be considered. This raises the issue of adopting a method for comparing different solutions (parameter sets) according to a set of objectives. Amongst the global optimization techniques that have blossomed in recent years, Multi Objective Genetic Algorithms (MOGA) have proved effective in numerous engineering applications, including sewer network modelling. Most of the techniques rely on the condition of Pareto efficiency to compare different solutions. However, as the number of criteria increases, the ratio of Pareto optimal to feasible solutions increases as well. The pitfalls are twofold: the efficiency of the genetic algorithm search worsens and decision makers are presented with an overwhelming number of equally optimal solutions. This paper proposes a new MOGA, the Preference Ordering Genetic Algorithm, which alleviates the drawbacks of conventional Pareto-based methods. The efficacy of the algorithm is demonstrated on the calibration of a physically-based, distributed sewer network model and the results are compared with those obtained by NSGA-II, a widely used MOGA.     

Systematic screening of the LDL-PLA2 gene for polymorphic variants and case-control analysis in schizophrenia

Systematic scans of the genome using microsatellite markers have identified chromosome 6p21.1 as a putative locus for schizophrenia in multiply affected families. There is also evidence from a series of studies for a role of abnormal phospholipid metabolism in schizophrenia. In light of these findings, and the role of platelet activating factor in neurotransmission and neurodevelopment, we have examined the LDL-PLA2 (plasma PAF acetylhydrolase, PAF-AH) gene, a serine dependent phospholipase that has been mapped by hybrid mapping to chromosome 6p21.1, as a positional candidate gene for schizophrenia. The gene was systematically screened using SSCP/HD analysis for polymorphisms associated with the disease. Four polymorphic variants were found within the gene and studied in a group of 200 schizophrenic patients and 100 controls. The variant in exon 7 (Iso195Thr) was found to be weakly associated with schizophrenia (p = 0.04) and the variant in exon 11 (Val379Ala) almost reached significance (p = 0.057). After correcting for multiple testing no significant associations were detected. Haplotype analysis combining pairs of polymorphisms also provided no evidence for association of this gene with schizophrenia in our sample of patients.     

Abnormalities of Wnt signalling in schizophrenia--evidence for neurodevelopmental abnormality

The Wnt signalling pathway is central to normal brain development in vertebrates and invertebrates and mediates cell fate determination, cell adhesion and cell proliferation. However, its relevance to disorders of cerebral development in man is untested. We evaluated the potential involvement of the Wnt signalling pathway in schizophrenia, a disorder of neurodevelopment origin in which alterations in neuronal lamination and orientation have been described. Using immunohistochemistry and semi-quantitative rating scales, we examined the distribution of two components of the Wnt signalling pathway, beta-catenin and gamma-catenin in the hippocampus and subiculum of 12 schizophrenic (DSMIIR criteria) and 14 control subjects. Both catenins were distributed as intraneuronal diffuse and/or ring shaped forms. The diffuse staining of both forms catenin were reduced in the CA3 and beta-catenin was also reduced in the CA4 hippocampal subregion among schizophrenic subjects. These alternations may represent the basis of the developmental brain abnormalities found in schizophrenia and would have functionally important consequences in the adult.     

Guideline for Measurement of Ozone Concentration in the Process Gas From an Ozone Generator

A joint meeting of members of the Quality Assurance Committees of the International Ozone Association Pan American Group (PAG), European-African Group (EAG), and Nippon Islands Group (NIG) was held in Oxford, Ohio on November 8 and 9, 1995. The purpose of the meeting was to establish a single, shared guideline for ozone concentration measurement in the gas phase and, in particular, from commercial ozone generators.