ANN‐based modeling of compact impedance‐varying transmission lines with applications to ultra‐wideband Wilkinson power dividers

The modeling of the physical and electrical characteristics of microstrip non‐uniform transmission lines (NTLs) utilizing artificial neural networks (ANNs) is investigated. The fundamental equations and constraints for designing variable impedance transmission lines are first presented. Then, a proof‐of‐concept example of a compact non‐uniform matching transformer and the counterpart modeled version is elaborated for source and load impedances Z_s and Z_l, respectively, at 0.5 GHz. For comparison purposes, weights and biases of the proposed ANN are established with three different training techniques; namely: backpropagation (BP), Quasi‐Newton (QN), and conjugate gradient (CG); at which the ABCD matrix, impedance variations, input port matching (S₁₁), and transmission parameter (S₂₁) are set as benchmarks to examine the validity of the trained model. The concept is then extended to model a NTL ultrawideband (UWB) Wilkinson power divider (WPD) with three resistors for improved isolation. S‐parameters derived from the trained ANN outputs are close to those obtained by the traditional time‐consuming optimization procedure, and show input and output ports matching and isolation of below ?10 dB, and acceptable values of transmission parameters over the 3.1 GHz to 10.6 GHz band. The resulting models outperform traditional optimizations in terms of simulation time and reserved resources with comparable accuracy. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:563–572, 2015.     

Resistance of exterior three-dimensional walls to high velocity projectiles

There have been a number of recent civilian deaths due to ammunition from commonly used firearms penetrating exterior walls of residential, public, and commercial buildings. Experimental research was conducted to study the behavior of three-dimensional (3D) exterior walls when subjected to high velocity projectiles or bullets fired from a variety of firearms of different calibers. Four types of firearms were used, namely, a 9 mm gun, a 0.357 Magnum gun, an M16 machine gun, and a 7.62 Clashin Koff machine gun. The size of chips and the depth of penetrations produced by the fired bullets are documented and discussed. It was found that none of the fired bullets penetrated the two reinforced concrete layers of the exterior wall. In conclusion, 3D exterior walls provide an acceptable level of protection from ammunition fired from commonly used firearms.     

Moving ion fronts in mixed ionic‐electronic conducting polymer films

The aim of this paper is to analyze moving front dynamics of ions and holes in a planar, mixed ionic‐electronic conducting polymer film. As cations invade the film, holes evacuate; thus, an ionic current is converted to an electronic signal. Recent experiments show that the location of the advancing ion front increases as the square‐root of time, a scaling typically associated with diffusive transport, which is surprising given the large driving voltages utilized. Ionic and electronic transport is modeled via the drift‐diffusion equations. A similarity transformation reduces the governing partial differential equations to ordinary differential equations that are solved numerically. The similarity transformation elucidates the origin of the square‐root‐of‐time front scaling. The similarity solution is then compared to the numerical solution of the full drift‐diffusion equations, finding excellent agreement. When compared with experimental data, our model captures the front location; however, qualitative differences between the ion profiles are observed. © 2015 American Institute of Chemical Engineers AIChE J, 61: 1447–1454, 2015     

Development and test of a new catalytic converter for natural gas fuelled engine

This paper presents characteristics of a new catalytic converter (catco) to be used for natural gas fuelled engine. The catco were developed based on catalyst materials consisting of metal oxides such as titanium dioxide (TiO₂) and cobalt oxide (CoO) with wire mesh substrate. Both of the catalyst materials (such as TiO₂ and CoO) are inexpensive in comparison with conventional catalysts (noble metals) such as palladium or platinum. In addition, the noble metals such as platinum group metals are now identified as human health risk due to their rapid emissions in the environment from various resources like conventional catalytic converter, jewelers and other medical usages. It can be mentioned that the TiO₂/CoO based catalytic converter and a new natural gas engine such as compressed natural gas (CNG) direct injection (DI) engine were developed under a research collaboration program. The original engine manufacture catalytic conveter (OEM catco) was tested for comparison purposes. The OEM catco was based on noble metal catalyst with honeycomb ceramic substrate. It is experimentally found that the conversion efficiencies of TiO₂/CoO based catalytic converter are 93%, 89% and 82% for NO_x, CO and HC emissions respectively. It is calculated that the TiO₂/CoO based catalytic converter reduces 24%, 41% and 40% higher NO_x, CO and HC emissions in comparison to OEM catco respectively. The objective of this paper is to develop a low-cost three way catalytic converter to be used with the newly developed CNG-DI engine. Detailed review on catalytic converter, low-cost catalytic converter development characteristics and CNGDI engine test results have been presented with discussions.     

Dispersion in steady and time-oscillatory flows through an eccentric annulus

A multiple-scale perturbation is conducted to derive an averaged equation for predicting the longtime solute transport in an eccentric annulus in which the uniaxial flow may oscillate periodically in time. A proof for the positiveness of the dispersivity is presented, implying that over a cycle of oscillation a solute cloud always broadens. For a steady flow driven by a fixed pressure gradient, increasing the eccentricity and annulus size gives rise to stronger dispersion. This relationship holds when the flow becomes unsteady. In the limit of slow oscillation, dispersion due to an oscillatory flow asymptotes to one-half of that by a steady flow. Increasing the oscillation frequency leads to a two-step decay of the dispersivity. The maximum dispersion in an oscillatory flow can be achieved in the limit of slow oscillation and large eccentricity, where dispersion can be O(10³) times larger than that in an otherwise concentric annulus.     

Effect of fexofenadine on eosinophil-induced changes in epithelial permeability and cytokine release from nasal epithelial cells of patients with seasonal allergic rhinitis

Recent studies have suggested that antihistamines, widely used in the treatment of symptoms of patients with allergic rhinitis, may also possess antiinflammatory properties. The mechanisms underlying this property, however, are not clearly understood. We have cultured epithelial cells from nasal biopsy specimens from patients with seasonal allergic rhinitis outside the pollen season and studied the effect of 0 to 10(-3) mol/L fexofenadine, the main active metabolite of terfenadine, on eosinophil-induced changes in electrical resistance (measure of permeability) and release of proinflammatory mediators from these cells. Additionally, we have studied the effect of this drug on eosinophil chemotaxis and adherence to endothelial cells induced by conditioned medium from these human nasal epithelial cell (HNEC) cultures. Incubation of HNEC in the presence of eosinophils treated with opsonized latex beads significantly decreased the electrical resistance of these cultures, an effect that was abrogated by treatment of the cultures with 10(-9) to 10(-3) mol/L fexofenadine. Similarly, incubation of HNEC in the presence of eosinophils treated with latex beads also significantly increased the basal release of the chemokine "regulated upon activation, normal T cell expressed and secreted" (RANTES) (from 96.0 to 613.0 fg/microg cellular protein; p < 0.05), IL-8 (from 42.0 to 198.5 pg/microg cellular protein; p < 0.05), granulocyte-macrophage colony-stimulating factor (GM-CSF) (from 0.54 to 3.4 pg/microg cellular protein; p < 0.05), and soluble intercellular adhesion molecule-1 (sICAM-1) (from 7.8 to 18.4 pg/microg cellular protein; p < 0.05) from HNEC. The eosinophil-induced release of IL-8, GM-CSF, and sICAM-1 from the HNEC was significantly attenuated by treatment with fexofenadine. Analysis of the effects of conditioned medium from HNEC demonstrated that this significantly increased both eosinophil chemotaxis and adherence to endothelial cells. Addition of 10(-6) to 10(-3) mol/L fexofenadine to the conditioned medium significantly attenuated eosinophil chemotaxis and adherence to endothelial cells. These results suggest that fexofenadine may reduce nasal inflammation by modulating the release of proinflammatory mediators and adhesion molecules from HNEC.     

A new electroless Ni plating procedure of iodine-treated aramid fiber

A new, durable, etchant- and tin-free catalyzation process was studied for electroless nickel metallization of aramid fiber via iodine pretreatment. Firstly, iodine components were selectively doped onto the inner part of the fiber using vapor iodine exposure followed by treatment with a tin-free acidic palladium chloride solution to form palladium iodide (PdI₂) on the fiber surface. After subsequent reduction of PdI₂ into metal palladium (Pd), electroless plating was carried out. A uniform Ni plating layer was formed on the fiber surface, which exhibited high durability against resistance tests of ultrasonic exposure, tape peel-off, and corrosion in NaCl solution. Here, Pd particles that formed at the inner part near the fiber surface functioned as an anchor of the plated layer as well as a catalyst of electroless plating. Investigation of the plate bath composition shows that the use of anionic surfactant enhances the adhesion of the plated layer with fiber matrix, while a reducing agent in the plate bath reduces the smoothness of the plated surface. Also, the plate bath pH and the temperature of the plating solution control the layer deposition rate noticeably more than does the plating time. The proposed method retained good tensile strength in the plated fiber. Ni-plated aramid fiber exhibited durable electrical conductivity and magnetic properties.     

Feasibility of irrigation canal linings in Bangladesh

This paper discusses the results of a financial analysis of alternative canal lining techniques on the basis of technical data generated through a series of field experiments. It reveals that for sand soils, constituting 27% of the total irrigable area of Bangladesh, brick lining, precast sections, soil cement, asphalt mats and also clay lining can generate positive financial benefits; but the formidable physical constraints, besides high initial investment costs, may discourage the widescale adoption of these linings. The paper concludes that for fine‐textured soils, representing 62% of the total irrigable area, considerable water can be saved by simple compaction of earthen canals using proper engineering design specifications.     

Prevalence of Salmonella in broilers at retail outlets, processing plants and farms in Malaysia

A study was conducted to estimate the prevalence of Salmonella among broilers retailed at wet-markets and processing plants. Litter and feed samples obtained from both broiler and breeder farms were also examined for Salmonella. A total of 158 out of 445 (35.5%) and 52 out of 104 (50.0%) broiler carcasses obtained from wet-markets and processing plants were contaminated with Salmonella, respectively. Salmonella was isolated from 14 out of 98 (14.3%) samples of intestinal content. Litter samples from broiler and breeder farms were positive for Salmonella, 8/40 (20%) and 2/10 (20%), respectively. Salmonella isolates (230) belonging to 15 different serovars were isolated. Predominant serovars were S. enteritidis, S. muenchen, S. kentucky and S. blockley.