Ultimate bearing capacity of strip footing resting on clay soil mixed with tire-derived aggregates

This study investigated the use of recycled tire-derived aggregate (TDA) mixed with kaolin as a method of increasing the ultimate bearing capacity ( UBC) of a strip footing. Thirteen 1g physical modeling tests were prepared in a rigid box of 0.6 m × 0.9 m in plan and 0.6 m in height. During sample preparation, 0%, 20%, 40%, or 60% (by weight) of powdery, shredded, small-sized granular (G 1–4 mm) or large-sized granular (G 5–8 mm) TDA was mixed with the kaolin. A strip footing was then placed on the stabilized kaolin and was caused to fail under stress-controlled conditions to determine the UBC. A rigorous 3D finite element analysis was developed in Optum G-3 to determine the UBC values based on the experimental test results. The experimental results showed that, except for the 20% powdery TDA, the TDA showed an increase in the UBC of the strip footing. When kaolin mixed with 20% G (5–8 mm), the UBC showed a threefold increase over that for the unreinforced case. The test with 20% G (1–4 mm) recorded the highest subgrade modulus. It was observed that the UBC calculated using finite element modeling overestimated the experimental UBC by an average of 9%.     

Al2O3/Yttria‐Stabilized Zirconia Hollow‐Fiber Membrane Incorporated with Iron Oxide for Pb(II) Removal

Removal by absorptive ceramic membranes can simultaneously absorb and separate metal ions from water. Alumina/yttria‐stabilized zirconia (Al₂O₃/YSZ) hollow‐fiber membranes, fabricated using phase inversion and sintering process, were deposited with iron oxide by an in‐situ hydrothermal process. The results showed that α‐Fe₂O₃ was produced and incorporated across the membranes. A reduction in flux was recorded with the deposition of α‐Fe₂O_3. However, it improved the adsorption capacity for heavy metal adsorption. The adsorption‐separation test demonstrated that the optimized membrane is able to completely remove Pb(II) ions after two hours.     

SO2 SCRUBBING BY ULTRAFINE CA(OH)2 AEROSOL

The objective of the present study was to generate submicrometer calcium hydroxide aerosols and to investigate the effectiveness of such aerosols in sulfur capture. The effectiveness of SO₂ removal by Ca(OH)₂ aerosol has been investigated in an isothermal reactor. Ca(OH) ₂ aerosol was generated by a novel fluidizer system in which submicrometer-sized powders were entrained in gases. SO₂ was added to this aerosol to a concentration of 2000 ppm. The aerosol-SO₂ mixture was heated to 550°C-750°C in an isothermal tube reactor. The SO₂ removal efficiency, which varied from 20% to 70%, was determined to be a function of the aerosol concentration, reactor temperature and residence time. The fraction of aerosol reacted was not affected strongly by the aerosol concentration. The reaction kinetics were determined from the experimental data using a simple analytical model in which the rate is first order in both SO₂ and calcium hydroxide aerosol concentrations.     

Conceptual design of a novel hybrid fuel cell/desalination system

A novel concept for integrating fuel cells with desalination systems is proposed and investigated in this work. Two unique case studies are discussed — the first involving a hybrid system with a reverse osmosis (RO) unit and the second — integrating with a thermal desalination process such as multi-stage flash (MSF). The underlying motivation for this system integration is that the exhaust gas from a hybrid power plant (fuel cell/turbine system) contains considerable amount of thermal energy, which may be utilized for desalination units. This exhaust heat can be suitably used for preheating the feed in desalination processes such as reverse osmosis which not only increases the potable water production, but also decreases the relative energy consumption by approximately 8% when there is an increase of just 8°C rise in temperature. Additionally, an attractive hybrid system application which combines power generation at 70%+ system efficiency with efficient waste heat utilization is thermal desalination. In this work, it is shown that the system efficiency can be raised appreciably when a high-temperature fuel cell co-generates DC power in-situ with waste heat suitable for MSF. Results indicate that such hybrid system could show a 5.6% increase in global efficiency. Such combined hybrid systems have overall system efficiencies (second-law base) exceeding those of either fuel-cell power plants or traditional desalination plants.     

Graft Copolymerization of Acrylamide onto Oil Palm Empty Fruit Bunch (OPEFB) Fiber

Grafting of acrylamide (AAm) onto oil palm empty fruits bunch fiber using hydrogen peroxide as initiator and methyl acrylate as comonomer was investigated. The amount of comonomer needed to make grafting of acrylamide possible was determined. The percentage of poly(acrylamide) and the comonomer in the final graft copolymer was estimated by elemental analysis. Results obtained indicated that methyl acrylate facilitated the incorporation of acrylamide monomer onto OPEFB. The reactivity ratios for both monomers were determined by using Fineman–Ross plot. The effects of reaction temperature and period as well as amount of the initiator, solvent, monomer and comonomer on the percentage of grafting at fixed amount of comonomer (11 mmol) were studied. Maximum percentage of grafting was achieved when the amount of initiator and solvent 3.98×10⁻³ mol and 50 mL respectively. The optimum reaction temperature was 50 ^○C and the reaction period was 90 min. Highest percentage of grafting was 232% when 25.6 mmol of acrylamide was used under these optimum conditions. The presence of functional group in the grafted polymer is characterized by infrared spectroscopy and the surface morphology is observed by scanning electron microscopy. Thermoanalytic investigation on OPEFB and OPEFB-g-PAAM were carried out to evaluate the thermal stability and respective activation energy of the materials.     

Cognitive-Mathematical Approaches for Evaluating Architectural Contextual Fit

The main goal of this study is to apply a scientific quantitative approach to the investigation of contextual fit. This is approached mathematically within the framework of cognitive science and research on categorization and prototypes. Two experiments investigated two leading mathematical-cognitive approaches for explaining people’s judgment of contextual fit of a new building with an architectural/urban context: prototype approach and feature frequency approach. The basic concept is that people represent the built environment via architectural prototypes and/or frequencies of encountered architectural features. In the first experiment, a group of twelve participants performed rank order tasks on artificially created architectural patterns, for the purpose of psychological scaling. Perceptual distances among all patterns were mathematically determined. In the second experiment, three groups of architectural patterns were constructed to represent assumed architectural contexts. The prototype of each context was mathematically determined according to prototype cognitive model, and based on the distances calculated in the first experiment. Fifty-six students participated in the main experiment, in which they rank ordered a group of fifteen architectural patterns in terms of contextual fit to each of the three architectural contexts. Participants’ rank order data of the fifteen patterns were regressed on both the perceptual distances from prototypes, and numbers of features shared with each architectural context. Results indicated that both prototype and feature frequency approaches significantly accounted for important portions of participants’ judgments. However, participants tended to prefer one approach to the other according to context composition. Results have implications for both research on utilizing cognitive-mathematical models in architectural research and on urban design guidelines and control.     

Nutratherapeutics approach against cancer: tomato‐mediated synthesised gold nanoparticles

In this study, an eco‐friendly biosynthesis of stable gold nanoparticles (T‐GNPs) was carried out using different concentrations of tomato juice (nutraceuticals) as a reducing agent and tetrachloroauric acid as a metal precursor to explore their potential application in cancer therapeutics. The synthesis of T‐GNPs was monitored by UV‐visible absorption spectroscopy, which unveiled their formation by exhibiting the typical surface plasmon absorption maxima at 522 nm. The size of T‐GNPs was found to be 10.86 ± 0.6 nm. T‐GNPs were characterised by dynamic light scattering, zeta potential, transmission electron microscopy analysis and Fourier transform infrared spectroscopy. T‐GNPs were further investigated for their anti‐cancer activity against human lung carcinoma cell line (A ₅₄₉) and human cervical cancer cell line wherein the IC₅₀ values were found to be 0.286 and 0.200 mM, respectively. T‐GNPs inhibited the growth of cancer cells by generating ROS and inducing apoptosis. T‐GNPs were found highly effective by virtue of their size, metallic property and capping molecules. Thus, this study opens up the prospects of using nutraceutical (tomato juice) as nutratherapeutic agent (T‐GNPs) against critical diseases like lung cancer and cervical cancer.Inspec keywords: gold, nanoparticles, particle size, cancer, ultraviolet spectra, visible spectra, electrokinetic effects, transmission electron microscopy, Fourier transform infrared spectra, cellular biophysics, spectrochemical analysis, nanomedicine, nanofabricationOther keywords: tomato‐mediated synthesised gold nanoparticles, tomato juice, reducing agent, tetrachloroauric acid, cancer therapeutics, UV‐visible absorption spectroscopy, surface plasmon absorption, dynamic light scattering, zeta potential, transmission electron microscopy analysis, Fourier transform infrared spectroscopy, human lung carcinoma cell line, anticancer activity, human cervical cancer cell line, nutratherapeutic agent, lung cancer, Au     

Optimized Identification with Severity Factors of Gastric Cancer for Internet of Medical Things

The Internet of Medical Things (IoMT) emerges with the vision of the Wireless Body Sensor Network (WBSN) to improve the health monitoring systems and has an enormous impact on the healthcare system for recognizing the levels of risk/severity factors (premature diagnosis, treatment, and supervision of chronic disease i.e., cancer) via wearable/electronic health sensor i.e., wireless endoscopic capsule. However, AI-assisted endoscopy plays a very significant role in the detection of gastric cancer. Convolutional Neural Network (CNN) has been widely used to diagnose gastric cancer based on various feature extraction models, consequently, limiting the identification and categorization performance in terms of cancerous stages and grades associated with each type of gastric cancer. This paper proposed an optimized AI-based approach to diagnose and assess the risk factor of gastric cancer based on its type, stage, and grade in the endoscopic images for smart healthcare applications. The proposed method is categorized into five phases such as image pre-processing, Four-Dimensional (4D) image conversion, image segmentation, K-Nearest Neighbour (K-NN) classification, and multi-grading and staging of image intensities. Moreover, the performance of the proposed method has experimented on two different datasets consisting of color and black and white endoscopic images. The simulation results verified that the proposed approach is capable of perceiving gastric cancer with 88.09% sensitivity, 95.77% specificity, and 96.55% overall accuracy respectively.     

Inchworm robot grippers for clothes manipulation

Manipulating deformable objects like clothes, plastic, and paper by a robot is very challenging. This paper focuses on clothes manipulation as an example. A tracing manipulation method is used here to find a corner of the clothes. In this paper, tracing refers to tracing the clothes’ edge, with the robot’s movement based on feedback from sensors. One difficulty during this edge tracing is to make the robot trace smoothly and speedily without dropping the clothes in the process. This is due to the fact that deformable objects are sensitive to contact forces. A solution to this problem is to design a special robot gripper that can trace the clothes without having to worry about the clothes slipping away. In this paper, the development of inchworm-type grippers is proposed. Two sets of grippers inside a robot hand will allow the robot to trace the clothes more freely because there will always be a gripper firmly holding the clothes at any time. A unique tracing method for towel spreading using the inchworm grippers is also discussed. Experimental results have demonstrated the effectiveness of both the proposed grippers and also the algorithm. This work was presented in part at the 12th International Symposium on Artificial Life and Robotics, Oita, Japan, January 25–27, 2007     

Sampling-based online motion planning for mobile robots: utilization of Tabu search and adaptive neuro-fuzzy inference system

Despite the proven advantages of sampling-based motion planning algorithms, their inability to handle online navigation tasks and providing low-cost solutions make them less efficient in practice. In this paper, a novel sampling-based algorithm is proposed which is able to plan in an unknown environment and provides solutions with lower cost in terms of path length, runtime and stability of the results. First, a fuzzy controller is designed which incorporates the heuristic rules of Tabu search to enable the planner for solving online navigation tasks. Then, an adaptive neuro-fuzzy inference system (ANFIS) is proposed such that it constructs and optimizes the fuzzy controller based on a set of given input/output data. Furthermore, a heuristic dataset generator is implemented to provide enough data for the ANFIS using a randomized procedure. The performance of the proposed algorithm is evaluated through simulation in different motion planning queries. Finally, the proposed planner is compared to some of the similar motion planning algorithms to support the claim of superiority of its performance.