Molecular structure and granule morphology of native and heat‐moisture‐treated pinhão starch

Pinhão seed is an unconventional source of starch and the pines grow up in native forests of southern Latin America. In this study, pinhão starch was adjusted at 15, 20 and 25% moisture content and heated to 100, 110 and 120 °C for 1 h. A decrease in λ max (starch/iodine complex) was observed as a result of increase in temperature and moisture content of HMT. The ratio of crystalline to amorphous phase in pinhão starch was determined via Fourier transform infra red by taking 1045/1022 band ratio. A decrease in crystallinity occurred as a result of HMT. Polarised light microscopy indicated a loss of birefringence of starch granules under 120 °C at 25% moisture content. Granule size distribution was further confirmed via scanning electron microscopy which showed the HMT effects. These results increased the understanding on molecular and structural properties of HMT pinhão starch and broadened its food and nonfood industrial applications.     

Video compression using spatiotemporal regularity flow.

We propose a new framework in wavelet video coding to improve the compression rate by exploiting the spatiotemporal regularity of the data. A sequence of images creates a spatiotemporal volume. This volume is said to be regular along the directions in which the pixels vary the least, hence the entropy is the lowest. The wavelet decomposition of regularized data results in a fewer number of significant coefficients, thus yielding a higher compression rate. The directions of regularity of an image sequence depend on both its motion content and spatial structure. We propose the representation of these directions by a 3-D vector field, which we refer to as the spatiotemporal regularity flow (SPREF). SPREF uses splines to approximate the directions of regularity. The compactness of the spline representation results in a low storage overhead for SPREF, which is a desired property in compression applications. Once SPREF directions are known, they can be converted into actual paths along which the data is regular. Directional decomposition of the data along these paths can be further improved by using a special class of wavelet basis called the 3-D orthonormal bandelet basis. SPREF -based video compression not only removes the temporal redundancy, but it also compensates for the spatial redundancy. Our experiments on several standard video sequences demonstrate that the proposed method results in higher compression rates as compared to the standard wavelet based compression.     

Zooplankton population in the river tigris: Effects of samarra impoundment

The influences of the Samarra impoundment on the ecology of the downstream sector of the river Tigris are investigated. Zooplankton were collected monthly from July 1987 to July 1988. It was found that zooplankton were most abundant during high river discharges in March. During the month of low river discharge, September, the zooplankton population was greatly reduced immediately below the barrage and remained so to the last downstream station. Several factors seem to explain such differences. The high discharge from the impoundment was found to be the dominating factor and may flush the small backwaters in which zooplankton were abundant, thus increasing the population in the river. Zooplankton species vary in their ability to sustain populations in the river, variations which are due mainly to species-specific characteristics.     

Synthesis and thermomechanical characterization of polyurethane elastomers extended with α,ω‐alkane diols

A series of polyurethane (PU) elastomers was prepared by the reaction of poly(?‐caprolactone) and 4,4′‐diphenylmethane diisocyanate, which was extended with a series of chain extenders (CEs) having 2–10 methylene units in their structure. The completion of the reaction was confirmed by Fourier transform infrared spectroscopy. The chemical structures of the synthesized PU samples were characterized with Fourier transform infrared, ¹H‐NMR, and ¹³C‐NMR spectroscopy, and the thermal properties were determined by thermogravimetric analysis, DSC, and dynamic mechanical thermal analysis techniques. The mechanical properties were also studied and are discussed. The thermogravimetric analysis and DSC analysis showed that CE length had a considerable effect on the thermal properties of the prepared samples. The dynamic mechanical thermal analysis and damping peaks were also affected by the number of methylene units in the CE length. The elastomer extended with 1,2‐ethane diol exhibited optimum thermal properties, whereas the elastomer based on 1,10‐decane diol displayed the worst thermal properties. Tensile strength and elongation at break decreased with increasing CE length, whereas hardness showed the opposite trend. The glass‐transition temperature moved toward lower temperatures with increasing CE length. The decrease in the glass‐transition temperature and tensile properties were interpreted in terms of decreasing hard segments and increasing chain flexibility. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

A study of neutron and gamma radiation effects on transmission of various types of glasses, optical coatings, cemented optics and fiber

A study of radiation effects on various types of glasses, dielectric optical coatings, cemented optics and fiber was undertaken with a view to select them for extreme radiation environments. Samples were exposed to different radiation doses in the Pakistan Research Reactor-I (PARR-I) for neutron and Cobalt 60 source for gamma irradiation. Transmissions were measured before and after irradiation. The dielectric coatings were subjected to additional tests (adhesion, abrasion and humidity, etc.) as per MIL-M-13508C and MIL-C-675C. All 15 glasses studied showed varying amounts of transmission loss as expected, with negligible degradation for three types. Recovery of transmissions with time/ageing was also studied, with more or less complete recovery with temperature annealing. A faster bleaching of darkened/brown glasses was achieved by using UV lamps or UV laser. The dielectric coatings (HR, AR) and one of the two commercial optical cements showed excellent resistance to neutrons and gamma radiations, and could be good candidates for the fabrication and utilization of optical components in extreme radiation environments. The data allowed several Chinese glasses to be studied for the first time.     

Observability by using viability kernels

The aim of this paper is to propose a new way to deal with observability of systems governed by ODEs, in a more general setting than the standard output equation.The primary finding is that observability over a time horizon reduces to single-valuedness of the vertical section of a set we name the observability kernel.The latter consists of the viability kernel of the output domain under the augmented system.The approach may be used either for global or local observability,to which available results on single-valuedness of multifunctions shall be applied in order to get necessary and/or sufficient characterizing conditions.Several examples are provided in order to illustrate the method.     

Autonomous mapping of HL7 RIM and relational database schema

Healthcare systems need to share information within and across the boundaries in order to provide better care to the patients. For this purpose, they take advantage of the full potential of current state of the art in healthcare standards providing interoperable solutions. HL7 V3 specification is an international message exchange and interoperability standard. HL7 V3 messages exchanged between healthcare applications are ultimately recorded into local healthcare databases, mostly in relational databases. In order to bring these relational databases in compliance with HL7, mappings between HL7 RIM (Reference Information Model) and relational database schema are required. Currently, RIM and database mapping is largely performed manually, therefore it is tedious, time consuming, error prone and expensive process. It is a challenging task to determine all correspondences between RIM and schema automatically because of extreme heterogeneity issues in healthcare databases. To reduce the amount of manual efforts as much as possible, autonomous mapping approaches are required. This paper proposes a technique that addresses the aforementioned mapping issue and aligns healthcare databases to HL7 V3 RIM specifications. Furthermore, the proposed technique has been implemented as a working application and tested on real world healthcare systems. The application loads the target healthcare schema and then identifies the most appropriate match for tables and the associated fields in the schema by using domain knowledge and the matching rules defined in the Mapping Knowledge Repository. These rules are designed to handle the complexity of semantics found in healthcare databases. The GUI allows users to view and edit/re-map the correspondences. Once all the mappings are defined, the application generates Mapping Specification, which contains all the mapping information i.e. database tables and fields with associated RIM classes and attributes. In order to enable the transactions, the application is facilitated with the autonomous code generation from the Mapping Specification. The Code Generator component focuses primarily on generating custom classes and hibernate mapping files against the runtime system to retrieve and parse the data from the data source—thus allows bi-directional HL7 to database communication, with minimum programming required. Our experimental results show 35–65% accuracy on real laboratory systems, thus demonstrating the promise of the approach. The proposed scheme is an effective step in bringing the clinical databases in compliance with RIM, providing ease and flexibility.     

Synthesis of telechelic monodispersed diols

Summary The synthesis of telechelic monodispersed diols produced from the radical telomerization of an excess of undecylenol with commercialy available , -dithiols HSC₂H₄XC₂H₄SH (X=0, S or CH₂) initiated by peroxides is presented. In each case, the diols were obtained selectively and quantitatively and they were characterized by both ¹H and ¹³C NMR. Their physical characteristics (Tg, T_m and decomposition temperatures) were determined. Such compounds are thermally more stable than polydispersed telechelic commercially available diols.     

Enhanced anti-biofilm activity of facile synthesized silver oxide nanoparticles against K. pneumoniae

Journal of Inorganic and Organometallic Polymers and Materials - The silver oxide nanoparticle was successfully synthesized using floral waste by simple one pot, cost effective method. The complete...     

An open-source multi-DOF articulated robotic educational platform for autonomous object manipulation

This research presents an autonomous robotic framework for academic, vocational and training purpose. The platform is centred on a 6 Degree Of Freedom (DOF) serial robotic arm. The kinematic and dynamic models of the robot have been derived to facilitate controller design. An on-board camera to scan the arm workspace permits autonomous applications development. The sensory system consists of position feedback from each joint of the robot and a force sensor mounted at the arm gripper. External devices can be interfaced with the platform through digital and analog I/O ports of the robot controller. To enhance the learning outcome for beginners, higher level commands have been provided. Advanced users can tailor the platform by exploiting the open-source custom-developed hardware and software architectures. The efficacy of the proposed platform has been demonstrated by implementing two experiments; autonomous sorting of objects and controller design. The proposed platform finds its potential to teach technical courses (like Robotics, Control, Electronics, Image-processing and Computer vision) and to implement and validate advanced algorithms for object manipulation and grasping, trajectory generation, path planning, etc. It can also be employed in an industrial environment to test various strategies prior to their execution on actual manipulators.