Cubic–Quartic Optical Solitons with Differential Group Delay for Kudryashov’s Model by Extended Trial Function

Journal of Communications Technology and Electronics - This paper implements mathematically rigorous extended trial function algorithm to address cubic–quartic optical solitons in...     

Poly(Acrylamide-Sepiolite) Composite Hydrogels: Preparation, Swelling and Dye Adsorption Properties

Summary Polymer-clay hydrogel composite was prepared on the basis of polyacrylamide (PAAm) gel containing the clay mineral sepiolite. The properties of swelling and dye adsorption of poly(acrylamide-sepiolite) (AAm/Sep) composite hydrogel were investigated. The parameters of swelling and diffusion in water and dye solutions were calculated for the AAm and AAm/Sep hydrogels. It was found that the equilibrium swelling degree of obtained composite higher than that of AAm gel. Spectroscopic analysis of composite and composite-dye systems was done with FT-IR method. Adsorption of monovalent cationic dyes such as Basic Blue 12 (BB-12) Basic Blue 9 (BB-9), and Basic Violet 1 (BV-1), was studied on the composite. In the adsorption experiments, S (Sigmoidal) type for composite gel adsorption isotherms in the Giles classification system was found. Adsorption studies indicated that the amounts of adsorbed dyes on the AAm/Sep composite hydrogel were increased with following order; BB-12 > BB-9 > BV-1. The composite hydrogel may be considered as good candidate for environmental application to retain more water and dyes.     

Synthesis and properties of chitosan-modified poly(vinyl butyrate)

Modification of chitosan by grafting of vinyl butyrate was carried out in homogeneous phase using potassium persulfate as redox initator and 1.5% acetic acid as solvent. The percent grafting and grafting efficiency were analysed and the high grafting efficiency up to 94% was observed. The effects of reaction variables such as monomer concentration, initiator concentration, temperature and reaction time were investigated. It was observed that the solubility of chitosan was markedly reduced after grafting with vinyl butyrate. The grafted product is insoluble in common organic solvents as well in dilute organic and inorganic acids. Characterization of the graft copolymers were carried out by using Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC) and Scanning Electron Microscopy (SEM) technics. Characteristic signal of carbonyl group was observed at 1,731 cm⁻¹ which belongs to the poly vinyl butyrate segments in the graft copolymer. The melting transition of the chitosan main chain in the copolymer shifted to 124°C from its original value 101°C. In addition to these, we have also studied topology of the graft copolymer and the SEM micrograph showed continuous homogenous matrix which means there is no phase separation.     

Measurement Uncertainty Budget of the PMV Thermal Comfort Equation

Fanger’s predicted mean vote (PMV) equation is the result of the combined quantitative effects of the air temperature, mean radiant temperature, air velocity, humidity activity level and clothing thermal resistance. PMV is a mathematical model of thermal comfort which was developed by Fanger. The uncertainty budget of the PMV equation was developed according to GUM in this study. An example is given for the uncertainty model of PMV in the exemplification section of the study. Sensitivity coefficients were derived from the PMV equation. Uncertainty budgets can be seen in the tables. A mathematical model of the sensitivity coefficients of \(T_{\mathrm{a}}\), \(h_{\mathrm{c}}\), \(T_{\mathrm{mrt}}\), \(T_{\mathrm{cl}}\), and \(P_{\mathrm{a}}\) is given in this study. And the uncertainty budgets for \(h_{\mathrm{c}}\), \(T_{\mathrm{cl}}\), and \(P_{\mathrm{a}}\) are given in this study.     

Solution approaches for the cutting stock problem with setup cost

In this paper, we study the Cutting Stock Problem with Setup Cost (CSP-S) which is a more general case of the well-known Cutting Stock Problem (CSP). In the classical CSP, one wants to minimize the number of stock items used while satisfying the demand for smaller-sized items. However, the number of patterns/setups to be performed on the cutting machine is ignored. In most cases, one has to find the trade-off between the material usage and the number of setups in order to come up with better production plans. In CSP-S, we have different cost factors for the material and the number of setups, and the objective is to minimize total production cost including both material and setup costs. We develop a mixed integer linear program and analyze a special case of the problem. Motivated by this special case, we propose two local search algorithms and a column generation based heuristic algorithm. We demonstrate the effectiveness of the proposed algorithms on the instances from the literature.     

Measurement Uncertainty Analysis of Temperature Based Solar Radiation Estimation Models

Solar radiation is the main energy source for activities in the earth. It is important that the solar radiation values are known accurately. In cases where parameters about solar radiation cannot be measured, solar radiation estimation models are used. These are mathematical functions derived from the measured meteorological parameters. In this study, temperature-based estimation models that commonly used in the literature were examined, and uncertainty analysis of the models were applied. These solar radiation estimation models are Allen model, Hargreaves model, Chen model and Bristow–Campbell model. These models calculate the total global solar radiation with the difference between the maximum and minimum air temperatures. Measurement uncertainty budgets of the models and an example calculation can be found in the study.     

Determination of melamine in milk and dairy products by high performance liquid chromatography

A simple, precise, accurate, and validated reverse-phase HPLC method was developed for the determination of melamine in milk (pasteurized and UHT milk) and dairy products (powdered infant formula, fruit yogurt, soft cheese, and milk powder). Following extraction with acetonitrile:water (50:50, vol/vol), samples were purified by filter (0.45 μm), separated on a Nucleosil C8 column (4.6 mm × 250 mm, 3 μm) with acetonitrile:10 mmol/L sodium L-octane sulfonate (pH 3.1; 15:85, vol/vol) as mobile phase at a flow rate of 1 mL/min, and determined by a photodiode array detector. A linear calibration curve was obtained in the concentration range from 0.05 to 5 mg/kg. Milk and dairy products were fortified with melamine at 4 levels producing average recovery yields of 95 to 109%. The limits of detection and quantification of melamine were 35 to 110 and 105 to 340 μg/kg, respectively. The method was then used to analyze 300 samples of milk and dairy products purchased from major retailers in Turkey. Melamine was not found in infant formulas and pasteurized UHT milk, whereas 2% of cheese, 8% of milk powder, and 44% of yogurt samples contained melamine at the 121, 694±146, and 294±98 μg/kg levels, respectively. These findings were below the limits set by the Codex Alimentarius Commission and European Union legislation. This is the first study to confirm the existence of melamine in milk and dairy products in Turkey. Consumption of foods containing these low levels of melamine does not constitute a health risk for consumers.     

Performance of cryogenically treated M35 HSS drills in drilling of austenitic stainless steels

In this study, performance of cryogenically treated M35 high speed steel (HSS) twist drills in drilling of AISI 304 and 316 stainless steels was evaluated in terms of thrust force, surface roughness, tool wear, tool life, and chip formation. To present the differences in tool performance between untreated and treated drills, and machinability between AISI 304 SS and AISI 316 SS, a number of experiments were performed at different combinations of cutting speed, and feed rate. As the results of the conducted experiments, the treated drills showed better performance than untreated drills in terms of thrust force, surface roughness, and tool wear and tool life for both types of stainless steels. Tool lives of treated HSS drills in drilling of AISI 304 SS and AISI 316 SS improved 32% and 14%, respectively, when compared with untreated drills. Experimental results also showed that machinability of AISI 304 SS was harder than the machinability of AISI 316 SS.     

A Distributed Multicast Routing Scheme for Multi-Layered Satellite IP Networks

In this paper, a distributed multicast routing scheme is introduced for multi-layered satellite IP networks, which include GEO, MEO, and LEO layers. This scheme aims to minimize the total cost of multicast trees in the satellite network. Multicast trees are constructed and maintained in the dynamic satellite network topology in a distributed manner. Simulation results are provided to evaluate the performance of the new scheme in terms of end-to-end delay and multicast tree cost.