Efficient Excitation of Hybrid Modes in a THz Clinotron

Journal of Infrared, Millimeter, and Terahertz Waves - Various regimes of hybrid, bulk-surface, modes being excited in the clinotron oscillator with a sheet electron beam and nonuniform grating...     

Forging furnace with thermochemical waste-heat recuperation by natural gas reforming: Fuel saving and heat balance

This paper considers thermochemical recuperation (TCR) of waste-heat using natural gas reforming by steam and combustion products. Combustion products contain steam (H₂O), carbon dioxide (CO₂), and ballast nitrogen (N₂). Because endothermic chemical reactions take place, methane steam-dry reforming creates new synthetic fuel that contains valuable combustion components: hydrogen (H₂), carbon monoxide (CO), and unreformed methane (CH₄). There are several advantages to performing TCR in the industrial furnaces: high energy efficiency, high regeneration rate (rate of waste-heat recovery), and low emission of greenhouse gases (CO₂, NO_x). As will be shown, the use of TCR is significantly increasing the efficiency of industrial furnaces – it has been observed that TCR is capable of reducing fuel consumption by nearly 25%. Additionally, increased energy efficiency has a beneficial effect on the environment as it leads to a reduction in greenhouse gas emissions.     

Cell Sheet Comprised of Mesenchymal Stromal Cells Overexpressing Stem Cell Factor Promotes Epicardium Activation and Heart Function Improvement in a Rat Model of Myocardium Infarction

Cell therapy of the post-infarcted myocardium is still far from clinical use. Poor survival of transplanted cells, insufficient regeneration, and replacement of the damaged tissue limit the potential of currently available cell-based techniques. In this study, we generated a multilayered construct from adipose-derived mesenchymal stromal cells (MSCs) modified to secrete stem cell factor, SCF. In a rat model of myocardium infarction, we show that transplantation of SCF producing cell sheet induced activation of the epicardium and promoted the accumulation of c-kit positive cells in ischemic muscle. Morphometry showed the reduction of infarct size (16%) and a left ventricle expansion index (0.12) in the treatment group compared to controls (24–28%; 0.17–0.32). The ratio of viable myocardium was more than 1.5-fold higher, reaching 49% compared to the control (28%) or unmodified cell sheet group (30%). Finally, by day 30 after myocardium infarction, SCF-producing cell sheet transplantation increased left ventricle ejection fraction from 37% in the control sham-operated group to 53%. Our results suggest that, combining the genetic modification of MSCs and their assembly into a multilayered construct, we can provide prolonged pleiotropic effects to the damaged heart, induce endogenous regenerative processes, and improve cardiac function.     

Optimizing the selective flocculation of coal by means of a selective reagent

The need to improve coal enrichment stems from the sharp deterioration in the coal being enriched (increasing ash and moisture content, content of small classes, rock content, etc.), which results from the widespread mechanization of mining operations, the development of high-ash deposits, and dust suppression [1].     

Production of hot-dipped tin plate 0.45–0.50 mm thick

Magnitogorsk Metallurgical Combine. Translated from Metallurg, No. 2, p. 37, February, 1991.     

Hepatic and pancreatic effects of polyenoylphosphatidylcholine in rats with alloxan-induced diabetes

In neonatally allylestrenol treated animals in adult age a single benzpyrene treatment significantly decreases the female and significantly increases the male rat's sexual activity. Three month old females display the negative sexual behavioral effect of neonatal allylestrenol treatment less than the six month old ones. The benzpyrene treatment in adult age decreases the sexual activity of male rats. The experiments call the attention to the modifying effect of perinatal steroid treatments to similar exposure in adult age.     

Approximate Method for Optimization of the Geometric Structure of Polyatomic Systems

A compact method of calculation for solving a fundamental problem in structural chemistry — the problem of optimizing the geometric structure of molecular systems — is proposed. Solution of this problem will allow predicting a number of properties of polymer systems based on the existence of a structure—property correlation. It should be noted that the proposed method allows performing all calculations in analytical form.     

Crack-like formation of failure-decided angle points on middle planes of the layers resistant to bending in multi-layer structure - a continuum model

A theoretical model is considered that describes, in a continuum approximation, formation of a segment of angle points on the middle planes of thin layers forming a multi-layer structure. These points are associated with the jumps of the slope of the middle planes on the segment. A 2-D case is dealt with. The structure is assumed to be a half-plane with its boundary parallel to the layers and acted upon by a symmetric distribution of the displacements normal to the boundary. The layers forming the structure are assumed capable of mutually gliding with respect to each other and of revealing their flexure rigidity under the above loading. The continuum approximation to describe the above multi-layer structure has been applied. Physically the above mathematical angle points may (depending on the layer material properties) emerge either as a result of transverse fracture of the layers or as a result of intensive local plastic deformation (formation of the plastic `hinges'). As a result, the bending moment drops drastically, so that it is assumed dropping down to zero. This condition is employed to determine the distribution of the above slope jumps. The segment length is determined by equating the bending moment at the remote (from the boundary) end of the segment to a critical (specified) value of the bending moment. Thus, the problem of determining the slope jumps on the segment is reduced to a Fredholm integral equation of the first kind with the kernel having an integrable singularity. This equation has been solved numerically. The results of the calculations are presented.     

Degradation of protective coatings of the Ni-M-Cr-Al-Y system due to sulfide-oxide corrosion

The results of testing corrosion resistance longevity in coatings of the Ni-M-Cr-Al-Y system at temperatures of 800, 850, and 900°C are given. The kinetic dependences of corrosion are determined, successive stages of the degradation of coatings are identified, and the effect of alloying coatings with chromium and aluminum on their degradation and durability is established.