Mathematical model for computer simulation and control of steelmaking

A dynamic model for computer simulation and control of steelmaking has been developed. It is essentially based on multicomponent mixed transport control theory with the incorporation of energy balance calculations. The model is applicable to both steelmaking in electric furnaces as well as in oxygen steelmaking converters. The adjustable parameters of the model for simulation of oxygen steelmaking are gas evolution rate (G_co). oxygen flux factor (F_o) and emulsification factor (EM). These simulation parameters, when combined with on-line measurement of off-gas composition and temperature, enable complete dynamic control of the process. The model developed is applied, as an example, to an industrially produced heat in a top blown oxygen steelmaking converter and the results of simulation are discussed.     

Security Driven Scheduling Model for Computational Grid Using NSGA-II

Number of software applications demands various levels of security at the time of scheduling in Computational Grid. Grid may offer these securities but may result in the performance degradation due to overhead in offering the desired security. Scheduling performance in a Grid is affected by the heterogeneities of security and computational power of resources. Customized Genetic Algorithms have been effectively used for solving complex optimization problems (NP Hard) and various heuristics have been suggested for solving Multi-objective optimization problems. In this paper a security driven, elitist non-dominated sorting genetic algorithm, Optimal Security with Optimal Overhead Scheduling (OSO₂S), based on NSGA-II, is proposed. The model considers dual objectives of minimizing the security overhead and maximizing the total security achieved. Simulation results exhibit that the proposed algorithm delivers improved makespan and lesser security overhead in comparison to other such algorithms viz. MinMin, MaxMin, SPMinMin, SPMaxMin and SDSG.     

Validity as a Measure of Data Quality in Internet of Things Systems

Data quality became significant with the emergence of data warehouse systems. While accuracy is intrinsic data quality, validity of data presents a wider perspective, which is more representational and contextual in nature. Through our article we present a different perspective in data collection and collation. We focus on faults experienced in data sets and present validity as a function of allied parameters such as completeness, usability, availability and timeliness for determining the data quality. We also analyze the applicability of these metrics and apply modifications to make it conform to IoT applications. Another major focus of this article is to verify these metrics on aggregated data set instead of separate data values. This work focuses on using the different validation parameters for determining the quality of data generated in a pervasive environment. Analysis approach presented is simple and can be employed to test the validity of collected data, isolate faults in the data set and also measure the suitability of data before applying algorithms for analysis. On analyzing the data quality of the two data sets on the basis of above-mentioned parameters. We show that validity for data set 1 was found to be 75% while it was found to be 67% only for data set 2. Availability and data freshness metrics performance were analyzed graphically. It was found that for data set 1, data freshness was better while availability metric was found better for data set 2. Usability obtained for data set 2 was 86% which was higher as compared to data set 1 whose usability metric was 69%. Thus, this work presents methods that can be leveraged for estimating data quality that can be beneficial in various IoT based industries which are essentially data centric and the decisions made by them depends upon the validity of data.

     

Competitiveness and an Emerging Sector: The Russian Software Industry and its Global Linkages

This paper analyzes the Russian software industry in the context of trade in information technology services. We assess Russia's underlying sources of competitive edge in software, such as its scientific establishments, education system, diaspora and low costs, and identify the institutional impediments to growth. A survey reveals that foreign outsourcing contracts, a high value-added niche and high education levels characterize Russia's small, privately held software firms. A comparison with the Indian software industry underscores the structural differences in outsourcing relationships developed by the two countries and emphasizes that national advantages are complex amalgamations of many factors and need to be overtly marketed. Beyond the resources that give comparative and competitive advantage to a transitioning economy, a critical role is played by powerful industry organizations and by non-market state institutions that can level the economic field and inject credibility into market structures.     

Stokes flow past a swarm of porous circular cylinders with Happel and Kuwabara boundary conditions

The problem of creeping flow past a swarm of porous circular cylinders with Happel and Kuwabara boundary conditions is investigated. The Brinkman equation for the flow inside the porous cylinder and the Stokes equation outside the porous cylinder in their stream function formulations are used. The force experienced by each porous circular cylinder in a cell is evaluated. Explicit expressions of stream functions are obtained for both the inside and outside flow fields. The earlier results reported by Happel and Kuwabara for flow past a solid cylinder in Happel’s and Kuwabara’s cell model, have been deduced. Analytical expressions for the velocity components, pressure, vorticity and stresstensor are also obtained     

3D CFD validation of invert trap efficiency for sewer solid management using VOF model

Earlier investigators have numerically carried out performance analysis of the invert trap fitted in an open channel using the stochastic discrete phase model(DPM) by assuming the open channel flow to be closed conduit flow under pressure and assuming zero shear stress at the top wall.This is known as the fixed lid model.By assuming the top wall to be a shear free wall,they have been able to show that the velocity distribution looks similar to that of an open channel flow with zero velocity at the bottom and maximum velocity at the top,representing the free water surface,but no information has been provided for the pressure at the free water surface.Because of this assumption,the validation of the model in predicting the trap efficiency has performed significantly poorly.In addition,the free water surface subject to zero gauge pressure cannot be modeled using the fixed lid model because there is no provision of extra space in the form of air space for the fluctuating part of the water surface profile.It can.however,be modeled using the volume of fluid(VOF) model because the VOF model is the appropriate model for open channel or free surface flow.Therefore,in the present study,three-dimensional(3D) computational fluid dynamics(CFD) modeling with the VOF model,which considers open channel flow with a free water surface,along with the stochastic DPM.was used to model the trap efficiency of an invert trap fitted in an open rectangular channel.The governing mathematical flow equations of the VOF model were solved using the ANSYS Fluent 14.0 software,reproducing the experimental conditions exactly.The results show that the 3D CFD predictions using the VOF model closely fit the experimental data for glass bead particles.     

Identification of Species Origin of Meat and Meat Products on the DNA Basis: A Review

The adulteration/substitution of meat has always been a concern for various reasons such as public health, religious factors, wholesomeness, and unhealthy competition in meat market. Consumer should be protected from these malicious practices of meat adulterations by quick, precise, and specific identification of meat animal species. Several analytical methodologies have been employed for meat speciation based on anatomical, histological, microscopic, organoleptic, chemical, electrophoretic, chromatographic, or immunological principles. However, by virtue of their inherent limitations, most of these techniques have been replaced by the recent DNA-based molecular techniques. In the last decades, several methods based on polymerase chain reaction have been proposed as useful means for identifying the species origin in meat and meat products, due to their high specificity and sensitivity, as well as rapid processing time and low cost. This review intends to provide an updated and extensive overview on the DNA-based methods for species identification in meat and meat products.     

The propagation of pressure in a gelled waxy oil pipeline as studied by particle imaging velocimetry

Paraffinic crude oils in pipelines may form waxy gels during flow shutdowns. These gels can be dislodged by applying pressure if the wall shear stress, proportional to the local pressure gradient, exceeds the gel yield stress. The simplest models assume that the axial pressure profile becomes linear immediately after a jump in upstream pressure, but this fails to account for gel time‐dependent rheology or the effect of gel voids on pressure wave propagation. To investigate the former factor, pressure profile and particle imaging velocimetry (PIV) measurements were performed on a model oil gelled under pressure to reduce void formation. After a jump in upstream pressure to a value insufficient to restart flow, the axial pressure profile becomes linear in a two‐step process, with an immediate small rise in downstream pressure followed by a time‐delayed jump. The local downstream gel deformation measured by PIV exhibits similar two‐step time dependence. © 2011 American Institute of Chemical Engineers AIChE J, 2012     

Cold Model Investigations of Melting of Ice in a Gas-Stirred Vessel

The melting of steel scrap in high temperature liquid iron melt is investigated by conducting cold model experiments of the melting of ice sample of different geometries and sizes in an argon-stirred vessel containing water. The melting process of ice samples is observed using a high-speed camera. Design of experiments is based on similarity criteria. The relationships between non-dimensional groups related to heat transfer (Nu, Re, Pr, and Gr) are derived for different experimental conditions. The results are compared with those reported in the literature. The heat transfer coefficient is estimated as a function of mixing power and is found to be in good agreement with the calculated values obtained by using reported relationships in literature.