Kinetik der polykondensation von natriumsulfidhydrat und 1,4-dichlorbenzol zu poly(thio-1,4-phenylen)

The kinetics of the polycondensation of sodium sulfide hydrate and 1,4-dichlorobenzene to poly(thio-1,4-phenylene) in 1-methyl-2-pyrrolidone as solvent was studied in a differential scanning calorimeter at temperatures between 220 and 280°C. This polycondensation shows an autocatalytic behavior and the kinetics can be modelled by a first order reaction up to complete conversion. This is explained by the low solubility of sodium sulfide in l-methyl-2-pyrrolidone. The concentration of sodium sulfide is regarded as being constant during the whole course of the reaction. The autocatalytic effect can be explained by the increase of the condensation rate constant at the beginning of polycondensation due to the higher reactivity of the oligomers compared to the monomers. The number- and the weight-average molecular weight of the products formed during the course of the polycondensation can be modelled by means of stochastic methods. A simple model with only two different rate constants of the condensation process is assumed. The concentration of sodium sulfide in the reactive phase is found to be 2–5% of the value of dichlorobenzene at the beginning of the reaction and remains constant nearly until the end of polycondensation.     

A Study of Surface Deformation during Wire‐Rod Rolling of High Speed Steels using Experimental and Computational Techniques

The evolution of surface defects during shape rolling of high‐speed steel billets is studied using longitudinal surface defects prepared by machining and welding. The reduction of the defects during rolling in a production mill is compared to the total area reduction of the billets. Samples are collected after pass 4, 6, 8, 14, 19 and the final pass, 28, representing the finished 5.5mm wire. By inspecting the cross sections, the rotation of the billets from pass to pass is evaluated. Results from FE simulations on solid billets are compared to the experimental results. Generally, simulations predict less reduction than observed experimentally. In most cases cracks reduce most effectively followed by carbon steel welds and stainless steel welds.     

Differential kinetics and distribution of antibodies in serum and nasal and vaginal secretions after nasal and oral vaccination of humans

Although nasal vaccination has emerged as an interesting alternative to systemic or oral vaccination, knowledge is scarce about the immune responses after such immunization in humans. In the present study, we have compared the kinetics and organ distribution of the antibody responses after nasal and oral vaccination. We immunized female volunteers nasally or orally with cholera toxin B subunit (CTB) and determined the specific antibody levels in serum and nasal and vaginal secretions, as well as the number of circulating antibody-secreting cells, before immunization and 1, 2, 3, 6, and 26 weeks thereafter. Nasal vaccination induced 9-fold CTB-specific immunoglobulin A (IgA) and 56-fold specific IgG antibody increases in nasal secretions, whereas no significant IgA increase was seen after oral vaccination. Both oral and nasal vaccination resulted in 5- to 6-fold CTB-specific IgA and 20- to 30-fold specific IgG increases in vaginal secretions. Strong serum responses to CTB were also induced by both routes of vaccination. A notable difference between nasal and oral vaccination was that the nasal route elicited a specific antibody response with a later onset but of much longer duration than did the oral route. We conclude from this study that the nasal route is superior to the oral route for administering at least nonliving vaccines against infections in the upper respiratory tract, whereas either oral or nasal vaccination might be used for eliciting antibody responses in the female genital tract.     

Effects of carbon content and solidification rate on thermal conductivity of grey cast iron

The thermal conductivity or diffusivity of pearlitic grey irons with various carbon contents is investigated by the laser flash method. The materials are cast in controlled thermal environments and produced in three dissimilar cooling rates. The cooling rate together with the carbon content largely influence the thermal conductivity of grey iron. Linear relationships exist between the thermal conductivity and the carbon content, the carbon equivalent and the fraction of former primary solidified austenite transformed into pearlite. The work shows that optimal thermal transport properties are obtained at medium cooling rates. Equations describing the thermal conductivity of pearlite,solidified as pre-eutectic austenite, and the eutectic of grey iron are derived. The thermal conductivity of pearlitic grey iron is modeled at both room temperature and elevated temperature with good accuracy.     

Note: flowing ion population from a resonance cavity source

The experimental low energy plasma for hemispherical analyzers nominal testing thermal plasma facility of Dartmouth College uses a microwave plasma source which generates an ionosphere-like plasma through a two-step process. The plasma is initially generated inside a cylindrical, insulated, resonance cavity. This initial plasma must pass through a sheath in order to enter the main experimental region. This process imparts a significant flow velocity to the ions which has been neglected in previous analysis of this plasma source. We predict the flow energy of the ions to be between 12-15 eV depending on conservation laws and show agreement with experimental results.     

Top-down vs bottom-up methodologies in multi-agent system design

Traditionally, two alternative design approaches have been available to engineers: top-down and bottom-up. In the top-down approach, the design process starts with specifying the global system state and assuming that each component has global knowledge of the system, as in a centralized approach. The solution is then decentralized by replacing global knowledge with communication. In the bottom-up approach, on the other hand, the design starts with specifying requirements and capabilities of individual components, and the global behavior is said to emerge out of interactions among constituent components and between components and the environment. In this paper we present a comparative study of both approaches with particular emphasis on applications to multi-agent system engineering and robotics. We outline the generic characteristics of both approaches from the MAS perspective, and identify three elements that we believe should serve as criteria for how and when to apply either of the approaches. We demonstrate our analysis on a specific example of load balancing problem in robotics. We also show that under certain assumptions on the communication and the external environment, both bottom-up and top-down methodologies produce very similar solutions.

Acetals as nucleating agents for polypropylene

Nucleating agents increase the impact strength, tensile strength, and tensile elasticity modulus of semicrystalline polymers. Nucleating agents also decrease product cycle times, resulting in a cost savings per product unit. We have synthesized and tested 15 compounds as nucleactors for polypropylene. Of these, trinapthylidene sorbitol, tri-(4-methyl-1-naphthylidene)sorbitol, tri-(4-methoxy-1-naphthylidene) sorbitol, and dibenzylidene xylitol are efficient nucleators of polypropylene. Trinaphthylidene sorbitol (tns) has two major diastereomers: The “S” diastereomer yields a faster crystallization rate for polypropylene than does the commercial nucleator dibenzylidene sorbitol (Millad 3905). Crystallization rates are 208 and 88, respectively (t min^?1 × 1000). The “R” diastereomer, however, is a poor nucleator and interferes with the nucleating activity of the “S” diastereomer. A 52/48 mixture of diastereomers does not nucleate polypropylene, even at twice the concentration. This is first time that the importance of stereochemistry has been demonstrated in the nucleating action. © 1994 John Wiley & Sons, Inc.     

Evaluating the relationship between chemical exposure and cryptorchidism

One method for the evaluation of complex environmental and health datasets is the discrete mathematical method Hasse diagram technique based on partial orders. The introduced software program package is named PyHasse. In this paper we evaluate a possible human association between maternal exposure to organochlorine compounds used as pesticides and cryptorchidism among male children in Finland and Denmark. We identified differences in comparable and incomparable objects and quantified these differences by the software tool Similarity Analysis in the program PyHasse. Furthermore we interpreted the corresponding Hasse diagrams concerning chosen “striking objects”. We found the position of the chemicals AHCH (alpha-Hexachlorohexane), CHCE (cis-Heptachloroepoxide), DIEL (Dieldrin), and MIRE (Mirex) has some influence on the differentiation of the Hasse diagrams and hence of each two datasets analyzed. The largest disparities can be observed when we compare the Finnish and Danish datasets concerning cryptorchidism. The disparities are demonstrated in the corresponding Hasse diagrams.