Surface chemistry and suspension stability of oxide-nitride powder mixtures

The effect of bimetallic oxide sintering aids on the colloidal stability of homogeneous (surface-coated) and heterogeneous (mechanically mixed) silicon nitride powder mixtures in aqueous solution was studied by acoustophoretic analysis. While the surface charge generation and colloidal stability of single-phase and oxide-coated silicon nitride powder mixtures may be described according to the site dissociation model of amine and hydroxyl surface groups, the surface charge observed in heterogeneous multiphase powder mixtures is associated with the adsorption of soluble metal ion hydroxocomplexes on the nitride particles. Segregation of the mixtures by heteroflocculation, which causes the formation of agglomerates and microstructural defects upon sintering, may be avoided by generation of a threshold surface potential of equal sign on all powder constituents at a pH where the metal hydroxide dissolution is subcritical.     

Enhancing the air impermeability of a biobased poly(di‐isoamyl itaconate‐co‐isoprene) elastomer via the cocoagulation of latex and natural layered silicates

The gas‐barrier properties of elastomer are of particular importance, especially for airtight applications. Poly(di‐isoamyl itaconate‐co‐isoprene) (PDII) is a newly invented and respectable biobased elastomer, but the barrier properties of PDII and its composites with carbon black and silica are not satisfying at all. Because there are abundant ester groups in PDII macromolecules and these groups can contribute to the homogeneous dispersion of layer silicates, we applied layered silicates, including montmorillonite (MMT) and rectorite (REC), into the PDII matrix to improve the air impermeability. MMT/PDII and REC/PDII composites were prepared by a cocoagulation method, and the air impermeability of the PDII elastomer was highly improved. The smallest gas permeability index reached 1.7 × 10^?17 m² Pa^?1 s^?1 at an REC content of 80 phr; this implied a reduction of 85.5%. A comparison of the two types of silicate/PDII composites showed that the MMT/PDII composites had better properties at low filler contents, whereas the REC/PDII composites had better mechanical and gas‐barrier properties at high filler contents. Other structures and properties of the composites were investigated by X‐ray diffraction, transmission electron microscopy, and dynamic mechanical rheology. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40682.     

Modelling and identification of synchronous machines, a newapproach with an extended frequency range

Correct modeling of turbogenerators is difficult, as currents are flowing during transients not only in the field and damper winding but also in the solid rotor iron. To model this effect, especially at high frequencies, new model structures called ladder networks are introduced. Their parameters are identified by combining the standstill frequency response measurements with the results of the standardized three-phase no-load short-circuit test. By means of this combination the errors in the standstill frequency responses, caused by the iron nonlinearity and the contact uncertainty of the slot wedges at standstill, are expected to be reduced. Both the new ladder networks and the standard models are used to simulate disturbances for comparison. In some cases (three-phase terminal fault out-of-phase synchronization) both models yield equivalent results, but in other cases (operation after a close-up fault) the results of the two models can differ considerably     

The IPCS Collaborative Study on Neurobehavioral Screening. I. Background and genesis

Numerous events over several years culminated in recognition of the need to explicitly evaluate the nervous system as a potential target for environmental chemicals. Based on recommendations from several international expert panels, the International Programme on Chemical Safety (IPCS) sponsored the Collaborative Study on Neurobehavioral Screening Methods. A Steering Committee was created to oversee the project, develop the testing protocol, recruit participating laboratories and review and analyze the data. The protocol specified the tests, the chemicals (supplied from a common source) and the exposure conditions (acute and repeated dosing). Test methods were based upon existing practices in toxicological screening as well as recent advances in neurotoxicity screening. Chemicals were selected to produce different profiles of neurobehavioral effects. Considerable latitude was afforded the participating laboratories in the choice of several key variables (e.g., strain of rat, testing device for motor activity assessment) that could potentially affect the results of the experiments. The approach therefore provided a standardized yet flexible protocol for evaluating the reproducibility of neurobehavioral screening data in diverse laboratory settings.     

Shoulder joint kinetics during the push phase of wheelchair propulsion

The purpose of this investigation was to quantify the forces and moments at the shoulder joint during free, level wheelchair propulsion and to document changes imposed by increased speed, inclined terrain, and 15 minutes of continuous propulsion. Data were collected using a six-camera VICON motion analysis system, a strain gauge instrumented wheel, and a wheelchair ergometer. Seventeen men with low level paraplegia participated in this study. Shoulder joint forces and moments were calculated using a three-dimensional model applying the inverse dynamics approach. During free propulsion, peak shoulder joint forces were in the posterior (46 N) and superior directions (14 N), producing a peak resultant force of 51 N at an angle of 185 degrees (180 degrees = posterior). Peak shoulder joint moments were greatest in extension (14 Newton-meters [Nm]), followed by abduction (10 Nm), and internal rotation (6 Nm). With fast and inclined propulsion, peak vertical force increased by greater than 360%, and the increase in posterior force and shoulder moments ranged from 107% to 167%. At the end of 15 minutes of continuous free propulsion, there were no significant changes compared with short duration free propulsion. The increased joint loads documented during fast and inclined propulsion could lead to compression of subacromial structures against the overlying acromion.     

The IPCS Collaborative Study on Neurobehavioral Screening Methods: II. Protocol design and testing procedures

This paper describes the development of the protocol for the International Programme on Chemical Safety (IPCS)-sponsored Collaborative Study on Neurobehavioral Screening Methods, including background on the methods and chemicals selected, as well as details concerning the conduct of the collaborative study, including proficiency testing, range-finding and main study. Participating laboratories in the collaborative study received training in the conduct and scoring of the behavioral tests and each laboratory received a video training film to train additional personnel as needed. Each of the eight laboratories that chose to participate in the study completed proficiency testing and assessed seven representative chemicals using a functional observational battery and automated motor activity assessment. The seven chemicals studied were acrylamide, bis-acrylamide, p,p'-DDT, lead acetate, parathion, toluene, and triethyl tin. Participants received coded samples of the chemicals from a common source. Each laboratory derived doses for single and repeated administration based on the determination of a within-laboratory acute "top dose." Animal strains were not standardized and laboratory conditions were standardized to a limited degree in order to judge the general utility and robustness of these procedures in a diversity of testing situations.     

Helicobacter pylori infection in the etiopathogenesis of duodenal ulcer in children

The study evaluates the frequency of Helicobacter pylori (H. pylori) infection, as well as systemic cellular immune response to H. pylori in children with duodenal ulcer (DU). The study group comprised 47 children with DU, aged 6-17 (mean 13, 1 +/- 4, 2). H. pylori detection was based on urease test, histology, culture and serologic tests. Endoscopic and morphologic findings were analysed according to Sydney System criteria. In 12 children from the overmentioned group subsets of blood lymphocytes B and T (CD3, CD4, CD8, CD3/DR, CD19) and NK cells, some neutrophils functions (phagocytosis, chemiluminescence) and phagocytes receptors before and one month after H. pylori triple treatment were investigated. H. pylori infection was detected in 44 of the investigated children. In addition, pathologic examination revealed chronic gastritis in 44 children and chronic duodenitis in 42 of them. In immunosystemic examination decreased percentage of CD8 lymphocytes and NK cells, increased CD4/CD8 ratio, decreased mitogen-induced response and changes of function and receptor expression of neutrophils were found. After H. pylori treatment in follow-up endoscopy no ulcers were found and histologic examination did not reveal chronic active gastroduodenitis, while the rate of nonactive gastritis was increased. Eradication of H. pylori infection in 41 children and normalisation of immune parameters in 11 children were obtained. The results of our investigation indicate, that H. pylori infection plays an important role in the pathogenesis of DU in children.     

Long-lasting sensitization to food during the first two years precedes allergic airway disease. The MAS Study Group, Germany

Measurement of eosinophil percentages and ECP concentration in induced sputum may be useful in the diagnosis and assessment of the variability of airway inflammation in bronchial asthma (BA). To evaluate the usefulness of sputum eosinophil counts and ECP concentrations in the diagnosis of BA, we measured these parameters in 68 patients with respiratory complaints. In addition, we followed-up 14 BA patients with variable airflow limitation for 45.4 +/- 10.4 days. The BA group (n = 41) showed a higher percentage of sputum eosinophilia (24.5 +/- 7.6 vs. 2.2 +/- 2.9%, p < 0.001) and a higher level of sputum ECP (198.2 vs. 90.6 micrograms/L, p < 0.05) than those in the nonasthmatic group (NBA, n = 27). The sensitivity and specificity of sputum eosinophilia (> or = 5%) for the diagnosis of BA were 85.4% and 92.6%, respectively, which were better than the sensitivity (68.3%) and specificity (55.5%) of the increased level of sputum ECP (> or = 100 micrograms/L). Patients with moderate-to-severe persistent BA had a higher percentage of sputum eosinophil (n = 23, 34.6 +/- 10.6%) than those of mild persistent BA (n = 18, 10.7 +/- 5.2%, p < 0.01), but we could not find significant difference in ECP levels between mild persistent and moderate-to-severe persistent asthma. The percentages of sputum eosinophilia showed a moderate correlation with ECP (r = 0.4358, p < 0.01) and with the peak expiratory flow rate (PFR, r = -0.4746, p < 0.01) but sputum ECP did not correlate with PFR. In 14 BA patients who were followed, there was a relationship between changes of PFR and the percentage of sputum eosinophil (r = -0.7238, p < 0.01), but the change of PFR did not correlate with the change of sputum ECP levels. These results suggest that the sputum eosinophil count and sputum ECP level could be helpful in the diagnosis of BA, but that sputum ECP is not satisfactory for the assessment of variability of airway eosinophilic inflammation during the initial anti-inflammatory management of BA.     

On-farm detection of claw lesions in dairy cows based on acoustic analyses and machine learning

Claw lesions are a serious problem on dairy farms, affecting both the health and welfare of the cow. Automated detection of lameness with a practical, on-farm application would support the early detection and treatment of lame cows, potentially reducing the number and severity of claw lesions. Therefore, in this study, a method was proposed for the detection of claw lesions based on the acoustic analysis of a cow's gait. A panel was constructed to measure the impact sound of animals walking over it. The recorded impact sound was edited, and 640 sound files from 64 cows were analyzed. The classification of animal-lameness status was performed using a machine-learning process with a random forest algorithm. The gold standard was a 2-point scale of hoof-trimming results (healthy vs. affected), and 38 properties of the recorded sound files were used as influencing factors. A prediction model for classifying the cow lameness was built using a random forest algorithm. This was validated by comparing the reference output from hoof-trimming with the model output concerning the impact sound. Altering the likelihood settings and changing the cutoff value to predict lame animals improved the prediction model. At a cutoff at 0.4, a decreased false-negative rate was generated, and the false-positive rate only increased slightly. This model obtained a sensitivity of 0.81 and a specificity of 0.97. With this procedure, Cohen's Kappa value of 0.80 showed good agreement between model classification and diagnoses from hoof-trimming. In summary, the prediction model enabled the detection of cows with claw lesions. This study shows that lameness can be detected by machine learning from the impact sound of hoofs in dairy cows.