Glycoconjugated polymer 6. Synthesis of poly[styrene-<Emphasis Type="Italic">block</Emphasis>-(styrene-<Emphasis Type="Italic">graft</Emphasis>-amylose)] via potato phosphorylase-catalyzed polymerization

Summary The potato phosphorylase-catalyzed polymerization of α-D-glucose-1-phosphate (G-1-P) onto poly[styrene-block-(4-vinylbenzyl maltohexaoside)] (1) was performed at the molar ratios of [G-l-P]₀ and [maltohexaose]₀ of 35, 80, and 250. The product was found to be soluble in dimethyl sulfoxide, which was a good solvent for amylose, and showed the complex-formation with iodine, indicating that the product was assignable to poly[styrene-block-(styrene-graft-amylose)] (2). The quantitative analysis of the liberated phosphoric acid gave the average degree of polymerization o f the glucose unit (n) as 27, 5 1, and 180 for 2-I, 2-II, and 2-III, respectively. Received: 29 November 2002/Accepted: 22 December 2002 Correspondence to Toyoji Kakuchi     

Effectiveness of spatial representation in the formation of network communities: experimental study on community organizer

In this paper, we present and discuss Community Organizer, a system designed to support network communities. The main characteristic of Community Organizer is the use of spatial representations for the relationships among community members including the communications exchanged among these members. These spatial representations reflect the degree of closeness of interests and concerns among the members, and are intended to provide users with clues on how to form network communities. In order to investigate the effectiveness of the proposed spatial representations, we conducted experiments with two different versions of the software. One version offered meaningful spatial representations while the other version did not. The subjects who used the former software version felt a greater sense of ‘community’, enjoyed using the software more, and actively used it longer than the subjects using the latter software version (control condition). These results indicated that the proposed spatial representations are effective in supporting network community formation.     

Determination of three dimensional in situ stress from core discing based on analysis of principal tensile stress

To determine all of the components of in situ stress from core discing, both the directions and magnitudes of the principal in situ stresses must be determined for a disc of a given thickness. In this study, we analyzed the direction and magnitude of tensile stress below an HQ core stub for 11 core lengths using stress conditions under which core discing is likely to occur. First, based on an analysis of the direction of tensile stress below the core stub, we propose a method for determining directions of in situ stress from the height distribution at the periphery of the end surface of a disc. This method can be used with a disc of any thickness. Next, based on an analysis of the magnitude of tensile stress in the central part of a core, we propose a linear criterion for core discing, which can be applied to a core of any length. This criterion was in good agreement with an empirical formula obtained previously in laboratory experiments. By combining information on the direction of in situ stress and the linear criterion for core discing, we propose a method for determining all of the components of in situ stress from core discing under the assumption that vertical stress is given by the overburden stress. Finally, these methods were applied to discs obtained from a field where hydraulic fracturing was performed to measure horizontal stresses. The results showed that the azimuths of the principal stresses estimated from core discing were consistent with those of the principal horizontal stresses determined by hydraulic fracturing and that while the magnitudes of the principal horizontal stresses estimated from core discing showed a large scatter, they were similar to those determined by hydraulic fracturing.     

New class of cellulose fiber spun from the novel solution of cellulose by wet spinning method

A novel cellulose solution, prepared by dissolving an alkali-soluble cellulose, which was obtained by the steam explosion treatment on almost pure natural cellulose (soft wood pulp), into the aqueous sodium hydroxide solution with specific concentration (9.1 wt %) was employed for the first time to prepare a new class of multifilament-type cellulose fiber. For this purpose a wet spinning system with acid coagulation bath was applied. The mechanical properties and structural characteristics of the resulting cellulose fibers were compared with those of regenerated cellulose fibers such as viscose rayon and cuprammonium rayon commercially available. X-ray analysis shows that the new cellulose fiber is crystallographically cellulose II, and its crystallinity is higher but its crystalline orientation is slightly lower than those of other commercial regenerated fibers. The degree of breakdown of intramolecular hydrogen bond at C₃[X_am(C₃)] of the cellulose fiber, as determined by solid-state cross-polarization magic-angle sample spinning (CP/MAS) ¹³C NMR, is much lower than other, and the NMR spectra of its dry and wet state were significantly different from each other, indicating that cellulose molecules in the new cellulose fiber are quite mobile when wet. This phenomenon has not been reported for so-called regenerated cellulose fibers.     

Note: Accuracy of velocity correction for impact of a laser-accelerated miniature flyer with lithium fluoride shock-compressed along the [100] axis

We performed miniature flyer impact experiments to investigate the relationship between the apparent (u(a)) and actual (u(A)) particle velocities measured by a velocity interferometer in single-crystal lithium fluoride (LiF) that was shock-compressed along the [100] axis. The miniature flyer was accelerated to velocities in the range 652.5-1937.6 m/s by a tabletop pulsed laser. An empirical relationship of u(a) = (1.2749 ± 0.0102)u(A) was obtained. The obtained relationship agreed well with the results of a previous study within the experimental errors and its uncertainty was less than ±1%. This result indicates that the present experimental technique is effective for measuring the relationship between u(a) and u(A) of shocked transparent materials with a comparable accuracy to conventional methods.     

High-aspect-ratio through-hole array microfabricated in a PMMA plate for monodisperse emulsion production

Microchannel (MC) emulsification is a promising technique for producing monodisperse emulsions consisting of highly uniform droplets. The authors developed a high-aspect-ratio microstructure (HARMST) made of poly(methyl methacrylate) (PMMA) as a new MC emulsification device. A PMMA straight-through MC array plate consisting of 31,250 through-holes with a 7.3 × 22.9-μm oblong section and a 200-μm depth was fabricated by a process of synchrotron radiation (SR) lithography and etching. Oblong MCs fabricated in a PMMA straight-through MC array were highly uniform with a coefficient of variation of less than 2%. The fabricated PMMA straight-through MC array plate was used to produce water-in-oil (W/O) emulsions. Monodisperse W/O emulsions with average droplet diameters of approximately 25 μm and a minimum coefficient of variation of 3.2% were produced via a hydrophobic PMMA straight-through MC array. The PMMA straight-through MC array plate also produced monodisperse W/O emulsions at droplet production rates of up to 1.7 × 10⁴/s. The PMMA straight-through MC array plates developed in this work are expected to expand the application field of emulsification using straight-through MC array plates, which have previously been made of single-crystal silicon.     

Production of monodisperse water-in-oil emulsions consisting of highly uniform droplets using asymmetric straight-through microchannel arrays

This paper reports the production of monodisperse water-in-oil (W/O) emulsions using new microchannel emulsification (MCE) devices, asymmetric straight-through MC arrays that were hydrophobically modified. The silicon asymmetric straight-through MC arrays consisted of numerous pairs of microslots and circular microholes whose cross-sectional sizes were 10 μm. This paper primarily focused on investigating the effect of the osmotic pressure of a dispersed phase (Π_d) on MCE. This paper also investigated the effects of the type of continuous-phase oils and the dispersed-phase flux (J _d) on MCE. The dispersed phases were Milli-Q water and Milli-Q water solutions containing sodium chloride. The continuous phases were decane (as control), hexane, medium chain triacylglyceride (MCT), and refined soybean oil (RSO) solutions containing tetraglycerin monolaurate condensed ricinoleic acid ester (TGCR) as a surfactant. At Π_d of exceeding threshold, highly uniform aqueous droplets with coefficients of variation of less than 3% were stably generated via hydrophobic asymmetric straight-through MCs. Monodisperse W/O emulsions with average droplet diameters between 32 and 45 μm were produced using the alkane–oil and triglyceride–oil solutions as the continuous phase. This work also demonstrated that the hydrophobic asymmetric straight-through MC array had remarkable ability to produce highly uniform aqueous droplets at very high J _d of up to 1,200 L m⁻² h⁻¹.     

A low wall-loading DEMO reactor design with high priority for early and reliable realization of a tokamak fusion reactor over the cost performance

Based on scientific databases adopted for designing ITER plasmas and on the advancement of fusion nuclear technology from the recent R&D program, a low wall-loading DEMO fusion reactor has been designed, where high priority has been given to the early and reliable realization of a tokamak fusion plasma over the cost performance. Since the major radius of this DEMO reactor is chosen to be 10 m, plasma ignition is achievable with a low fusion power of 0.8 GW and an operation period of 4–5 hours is available only with inductive current drive. The low ignition power makes it possible to adopt a first wall with an austenitic stainless steel, for which significant databases and operating experience exists, due to its use in the presence of neutron irradiation in fission reactors. In step with development of advanced materials, a step-wise increase of the fusion power seems to be feasible and realistic, because this DEMO reactor has the potential to produce a fusion power of 5 GW.