Effects of Neodymium Concentration on Optical Characteristics of Polycrystalline Nd:YAG Laser Materials

A neodymium-doped yttrium-aluminum garnet (Y₃A1₅O₁₂, YAG) (Nd:YAG) ceramic that contained 0.3–4.8 at.% neodymium additives and exhibited nearly the same optical properties as those of a single crystal was fabricated by a solid-state reaction method using high-purity powders. Although the integrated absorption intensity of the ²H_9/2+⁴F_5/2 bands simply increased as the neodymium concentration in the YAG ceramics decreased, the fluorescence intensity of the 2.4 at.% Nd:YAG ceramic was the strongest among Nd:YAG ceramics with various neodymium concentrations and a 0.9 at.% Nd:YAG single crystal. An oscillation experiment was performed on a continuous-wave (cw) laser with a diode-laser exciting system using those ceramics and the single crystal. The oscillation threshold and slope efficiency in that analysis were 309 mW and 28%, respectively, for the 1.1 at.% Nd:YAG ceramics and 356 mW and 40%, respectively, for the 2.4 at.% Nd:YAG ceramics. The lasing characteristics of the ceramics in the present work were superior to those of a 0.9 at.% Nd:YAG single crystal that was fabricated by the Czochralski (Cz) method.     

An accurate experimental method for characterizing transmission lines embedded in multilayer printed circuit boards

We have developed an accurate method for measuring the complex propagation constant and characteristic impedance of transmission lines embedded in multilayer printed circuit boards. It is based on mathematical error-removal schemes using two different length transmission lines and an advanced via-hole structure that minimizes coupling. Consequently, associated errors, due to discontinuities and interference can be effectively eliminated, and the frequency dependencies of the transmission line parameters can be clarified in wide frequency bandwidths. We verified the validity of this method in frequency ranges up to at least 18 GHz, by comparing the determined values with the theory derived from transverse electromagnetic (TEM) approximations.     

Stability,cure properties,and applicability as one part adhesives of systems of divalent metal salts of mono(hydroxyethyl) phthalate–anhydride–bisepoxide

Heterogeneous curable compositions of divalent metal salts of mono(hydroxyethyl) phthalate–anhydride–bisphenol A diglycidyl ether (BADG) systems were prepared by merely mixing these components at room temperature. Stability at room temperature and cure properties at high temperature of the compositions were investigated for evaluating their applicability as one part adhesive. It was found that the systems containing Mg were generally more stable than those containing Ca. Similarly, at 150°C the Ca-containing systems showed generally shorter gelation time than the Mg-containing ones, due to the fact that the Ca salt dissolves more rapidly and enters into the addition reaction with the anhydride, leading to the faster appearance of the catalytic activities of the Ca carboxylate group. Among the various combinations of components, the metal salt–succinic anhydride (SA)–BADG systems were stable at room temperature for more than 6 months and rapidly cured at high temperature, showing excellent adhesive properties. This result indicates that the SA-containing systems should be of interest in applications to one part adhesives.     

Clinical features of primary and secondary atypical mycobacteriosis

A clinical investigation was carried out in 39 patients with atypical mycobacteriosis (AM). The patients at our hospital diagnosed as having AM during an 11-year period from 1981 to 1991 were reviewed in this study. The incidence of AM among all of mycobacterial infections has been increasing since 1988. The atypical mycobacteria detected included M. avium complex (MAC) in 79%, M. kansasii in 26%, and other organisms in 5%. Patients who had primary infection without underlying respiratory disease were compared with those who had secondary infection. In secondary infection, MAC was detected in the sputum of a high percentage of patients and was positive for more than 6 months despite therapy. Gamma globulin levels were also increased in patients with secondary infection. Cell mediated immunity was examined by the DNCB reaction and the detection of CD4- and CD8- positive T lymphocytes. The DNCB skin reaction was positive in 6 out of 26 patients with secondary infection. The percentage of CD8- positive T lymphocytes was higher in patients with secondary disease. Fischer's ratio (indicating the balance of plasma amino acids) was also examined as an index of the nutritional status. It was significantly lower in secondary infection compared with primary infection. Moreover, secondary infection was associated with a lower positive rate for the DNCB skin reaction and a lower Fischer's ratio when compared with pulmonary tuberculosis. Thus impairment of cell-mediated immunity, malnutrition, and a poor prognosis were significantly more common in secondary infection compared with primary infection.     

A novel on-chip electrostatic discharge (ESD) protection withcommon discharge line for high-speed CMOS LSIs

A novel on-chip electrostatic discharge (ESD) protection for high-speed CMOS LSI's that operate at higher than 500 MHz has been developed. Introduction of a newly developed common discharge line (CDL) can completely eliminate the protection device influence on the inner circuit operation. This enables minimization of the I/O capacitance by shrinking the dimension of the output transistor, which also serves as a protection device in conventional devices. This new protection (CDL protection) was applied to a high-speed DRAM of which I/O pin capacitance specification is 2 pF. As a result, the ESD tolerance of 4 kV for the charged device model test, 4 kV for the human body model test, and 700 V for the machine model test were obtained. In addition, the DRAM data rate higher than 660 MHz at room temperature was achieved. The results show significant improvement for both ESD and the I/O capacitance, compared with the conventional structure     

Sub-50-nm physical gate length CMOS technology and beyond usingsteep halo

Sub-50-nm CMOS devices are investigated using steep halo and shallow source/drain extensions. By using a high-ramp-rate spike annealing (HRR-SA) process and high-dose halo, 45-nm CMOS devices are fabricated with drive currents of 650 and 300 μA/μm for an off current of less than 10 nA/μm at 1.2 V with T_ox^inv =2.5 nm. For an off current less than 300 nA/μm, 33-nm pMOSFETs have a high drive current of 400 uA/μm. Short-channel effect and reverse short-channel effect are suppressed simultaneously by using the HRR-SA process to activate a source/drain extension (SDE) after forming a deep source/drain (S/D). This process sequence is defined as a reverse-order S/D (R-S/D) formation. By using this formation, 24-nm nMOSFETs are achieved with a high drive current of 800 μA/μm for an off current of less than 300 μA/μm at 1.2 V. This high drive current might be a result of a steep halo structure reducing the spreading resistance of source/drain extensions     

Design optimization of tall tubular lead/acid cells based on an analysis of the reaction distribution

In order to estimate the discharge performance of tall lead/acid cells (with tubular positives), changes in current and potential distributions with discharge progress were calculated with a computer on the basis of plate resistance and the current—potential—time relationship between small facing parts of positive and negative plates. The taller the cell, the larger the voltage drop along the plates. Thus, the discharge time became shorter despite a large amount of available active mass remaining in the bottom part of the plates.Various current-collector designs were evaluated, e.g., one with varying resistance at each height; a side conductor placed along the plates and connected to them at the top, centre and bottom, etc. Results revealed an optimum collector design with which the maximum discharge capacity could be obtained. Furthermore, it was shown that the side conductor markedly improved the discharge performance because the active mass near the connecting parts was appreciably used.     

Using precise data sets on farming and pesticide properties to verify a diffuse pollution hydrological model for predicting pesticide concentration.

Verification of a diffuse pollution model involves comparing results actually observed with those predicted by precise model inputs. Acquisition of precise model inputs is, however, problematic. In particular, when the target catchment is large and substantial estimation uncertainty exists, not only model verification but also prediction is difficult. Therefore, in this study, rice-farming data were collected for all paddy fields from all farmers in a catchment and pesticide adsorption and degradation rates in paddy field soil samples were measured to obtain precise model inputs. The model inputs successfully verified the model's capability to predict pesticide concentrations in river water. Sensitivity analyses of the model inputs elucidated the processes significantly affecting pesticide runoff from rice farms. Pesticide adsorption and degradation rates of the soil did not significantly affect pesticide concentrations, although pesticide discharge to river water accounted for less than 50% of the total quantity of pesticide applied to fields, possibly owing to pesticide adsorption and degradation. The timing of increases in pesticide concentrations in river water was affected mostly by the farming schedule, including the time of pesticide application and irrigation, and secondarily by rainfall events.     

A clinical study of respiratory infection isolating non-pathogenic Neisseria by transtracheal aspiration]

Neisseria species other than N. meningitidis and N. gonorrhoeae are generally regarded as commensal bacterial flora of the oropharynx, and little is known regarding cases of these non-pathogenic Neisseria species in the lower respiratory tract. We clinically examined respiratory tract infections from which non-pathogenic Neisseria species were isolated by transtracheal aspiration (TTA). The incidence of non-pathogenic Neisseria isolated was 54 (15.7%) out of 344 episodes of respiratory tract infections with isolated microorganisms from TTA, and was 17.6%, 15.8%, 14.3% for pneumonia, acute bronchitis, and chronic lower respiratory tract infection, respectively. All 54 episodes were isolated with other microorganisms such as alpha-Streptococcus spp. (75.9%), Haemophilus influenzae (25.9%) and anaerobics (22.2%). The isolation ratio according to the age group increased at 45 years of age or more, but did not increase with the advance of age. Predisposing factors were identified such as overt aspiration, iatrogenic procedure and heavy smoking. Cases without overt aspiration that had fevers of 38 degrees C or more or hypoxemia of less than PaO2 70 torr when detecting non-pathogenic Neisseria were observed more frequently in the aged than the non-aged. The findings suggest the detection of non-pathogenic Neisseria by TTA is influenced by the host state that the fall of microorganisms from the upper to lower respiratory tract cannot be defended or excluded by mucociliary transportation disorder due to underlying disease and smoking, or deterioration of physical status other than overt or silent aspiration.