Electrochromic properties of tungsten-molybdenum oxide electrodes

Tungsten oxide and molybdenum doped tungsten oxide electrochromic films have been electrochemically prepared from a metal peroxide bath and experimentally tested. They were characterized by electrical and optical methods, using cyclic voltammograms and calculating the charge capacity as a function of the number of deposition cycles.The color of the electrochromic WO₃ film is strongly altered by doping it with molybdenum. Electrochromic W---Mo oxide films were fabricated by adding different percentages of molybdenum to tungsten oxide, ranging from 0.5% to 7% weight of deposition solution. Normal optical transmittance was also measured and evidence is given of different behavior if the switching for oxidation and reduction cycle, so that coloration occurs in a shorter time than the bleaching. The time constant of the process tends to increase as a function of the molybdenum oxide doping concentration.     

A model to assess the effectiveness of topical antipruritics

A model has been developed to determine the effectiveness of topical antipruritics. It utilizes controlled, experimentally induced itch and has demonstrated the effectiveness of the direct action on cutaneous receptor sites of a topical anesthetic, benzocaine, in a topical antipruritic formulation, and has been used to differentiate between two effective topical antipruritics. Three studies are presented: The first study examined the reliability of the experimentally induced itch. Several indices of reliability were computed from the data of this first study. Cronbach's alpha was 0.92. Winer's theta also was 0.92. Simple test-retest reliability, computed at intervals of 29 min, 1 day, and 6-7 days, resulted in Pearson correlations of 0.84, 0.73, and 0.60, respectively. In the second study, the model differentiated statistically between the itch relief resulting from the topical application of a formulation with 6% benzocaine and the same formulation without benzocaine. The third study examined 2 known topical antipruritics: one containing 6% benzocaine and the other 1% hydrocortisone. Both topical antipruritics were found to relieve itch; however, the benzocaine antipruritic produced statistically significantly greater itch relief in more subjects than the hydrocortisone antipruritic at both 1 and 30 min after application. These results demonstrate that OTC antipruritics can be differentiated for effectiveness.     

Synthesis and Evaluation of Voltage-Gated Sodium Channel Blocking Pyrroline Derivatives Endowed with Both Antiarrhythmic and Antioxidant Activities

Under the hypothesis that cardioprotective agents might benefit from synergism between antiarrhythmic activity and antioxidant properties, a small series of mexiletine analogues were coupled with the 2,2,5,5-tetramethylpyrroline moiety, known for its antioxidant effect, in order to obtain dual-acting drugs potentially useful in the protection of the heart against post-ischemic reperfusion injury. The pyrroline derivatives reported herein were found to be more potent as antiarrhythmic agents than mexiletine and displayed antioxidant activity. The most interesting tetramethylpyrroline congener, a tert-butyl-substituted analogue, was at least 100 times more active as an antiarrhythmic than mexiletine.     

Producing persistent, high-current, high-duty-factor H- beams for routine 1 MW operation of Spallation Neutron Source (invited)

Since 2009, the Spallation Neutron Source (SNS) has been producing neutrons with ion beam powers near 1 MW, which requires the extraction of ～50 mA H(-) ions from the ion source with a ～5% duty factor. The 50 mA are achieved after an initial dose of ～3 mg of Cs and heating the Cs collar to ～170 °C. The 50 mA normally persist for the entire 4-week source service cycles. Fundamental processes are reviewed to elucidate the persistence of the SNS H(-) beams without a steady feed of Cs and why the Cs collar temperature may have to be kept near 170 °C.     

An integrated computer-controlled system for assisting researchers in cortical excitability studies by using transcranial magnetic stimulation

Transcranial magnetic stimulation (TMS) is the most important technique currently available to study cortical excitability. Additionally, TMS can be used for therapeutic and rehabilitation purposes, replacing the more painful transcranial electric stimulation (TES). In this paper we present an innovative and easy-to-use tool that enables neuroscientists to design, carry out and analyze scientific studies based on TMS experiments for both diagnostic and research purposes, assisting them not only in the practicalities of administering the TMS but also in each step of the entire study's workflow. One important aspect of this tool is that it allows neuroscientists to specify research designs at will, enabling them to define any parameter of a TMS study starting from data acquisition and sample group definition to automated statistical data analysis and RDF data storage. It also supports the diagnosing process by using on-line support vector machines able to learn incrementally from the diseases instances that are continuously added into the system. The proposed system is a neuroscientist-centred tool where the protocols being followed in TMS studies are made explicit, leaving to the users flexibility in exploring and sharing the results, and providing assistance in managing the complexity of the final diagnosis. This type of tool can make the results of medical experiments more easily exploitable, thus accelerating scientific progress.     

Nanoconfined mixed Li and Mg borohydrides as materials for solid state hydrogen storage

Several mixtures of LiBH₄ and Mg(BH₄)₂ borohydrides in different stoichiometric ratios (1:0, 2:1, 1:1, 1:2, 0:1), prepared by high energy ball milling, have been investigated with X-ray powder diffraction and thermal programmed desorption (TPD) volumetric analysis to test the dehydrogenation kinetics in correlation with the physical mixture composition. Afterwards mixed and unmixed borohydrides were dispersed on high specific surface area ball milled graphite by means of the solvent infiltration technique. BET and statistical thickness methods were used to characterize the support surface properties, and SEM micrographs gave a better understanding of the preparation techniques. It has been observed by TPD volumetric measurements that the confinement of the reactive borohydrides on the nanoporous supports leads to a lower dehydrogenation temperature compared to unsupported borohydrides. Moreover, a further decrease of the dehydrogenation temperature has been observed by increasing the specific surface area of the support and the pores volume and by using the prepared mixtures instead of pure materials. The dehydrogenation process seems to be favoured by the heterogeneous nucleation on the graphite surface of decomposition products or intermediate phases from melted liquid borohydrides.     

Reversible Fragmentation and Self‐Assembling of Nematic Liquid Crystal Droplets on Functionalized Pyroelectric Substrates

Investigation on the behavior of nematic liquid crystals on functionalized polar dielectric crystal substrates is accomplished. Very interesting effects can be observed in maneuvering liquid crystal droplets on the substrate surface, driven by electric fields generated by pyroelectric effect. Reversible drops fragmentation and self‐assembling in different configurations can be achieved. The dynamics of the observed phenomena is studied and the repeatability of the process is full assessed.     

Ultrafine,fine, and black carbon particle concentrations in California child‐care facilities

Although many U.S. children spend time in child care, little information exists on exposures to airborne particulate matter (PM) in this environment, even though PM may be associated with asthma and other respiratory illness, which is a key concern for young children. To address this data gap, we measured ultrafine particles (UFP), PM_2.5, PM₁₀, and black carbon in 40 California child‐care facilities and examined associations with potential determinants. We also tested a low‐cost optical particle measuring device (Dylos monitor). Median (interquartile range) concentrations for indoor UFP, gravimetric PM_2.5, real‐time PM_2.5, gravimetric PM₁₀, and black carbon over the course of a child‐care day were 14 000 (11 000‐29 000) particles/cm³, 15 (9.6‐21) μg/m³, 15 (11‐23) μg/m³, 48 (33‐73) μg/m³, and 0.43 (0.25‐0.65) ng/m³, respectively. Indoor black carbon concentrations were inversely associated with air exchange rate (Spearman's rho = ?.36) and positively associated with the sum of all Gaussian‐adjusted traffic volume within a one‐kilometer radius (Spearman's rho = .45) (P‐values <.05). Finally, the Dylos may be a valid low‐cost alternative to monitor PM levels indoors in future studies. Overall, results indicate the need for additional studies examining particle levels, potential health risks, and mitigation strategies in child‐care facilities.     

High‐tuning‐range CMOS band‐pass IF filter based on a low‐Q cascaded biquad optimization technique

A design procedure for high‐order continuous‐time intermediate‐frequency band‐pass filters based on the cascade of low‐Q biquadratic cells is presented. The approach is well suited for integrated‐circuit fabrication, as it takes into account the maximum capacitance spread dictated by the available technology and maximum acceptable sensitivity to component variations. A trade‐off between noise and maximum linear range is also met. A novel, wide‐tuning‐range transconductor topology is also described. Based on these results, a 10‐pole band‐pass filter for a code division multiple‐access satellite receiver has been designed and tested. The filter provides tunable center frequency (f₀) from 10 to 70 MHz and exhibits a 28‐MHz bandwidth around f₀ = 70 MHz with more than 39‐dB attenuation at f₀/2 and 2f₀. Third‐order harmonic rejection is higher than 60 dB for a 1‐Vpp 70‐MHz input, and equivalent output noise is lower than 1 mV_rms. The circuit is fabricated in a 0.25‐µm complementary metal oxide semiconductor process, and the core consumes 12 mA from a 2.5‐V supply, offering the best current/pole ratio figure. The die area resulted to be 0.9 × 1.1 mm². Copyright © 2014 John Wiley & Sons, Ltd.